EngineeringRise

Group 15 and 16 Trends, Nitrogen and Oxygen: JEE Main

Reviewed Last updated 2026-11-20. Syllabus topic: Group 15 and 16 trends and unique behaviour.

In short. Group 15 is ns2 np3 and group 16 is ns2 np4. Down the groups metallic character rises, hydride stability falls, and oxides turn acidic to basic. Nitrogen and oxygen are unique: small, no d orbitals, strong pp-pp multiple bonds and hydrogen bonding.

  • Valence configurations: group 15 ns2 np3, group 16 ns2 np4; maximum common oxidation states +5 and +6 (group number minus 10), and the lower +3 and +4 become more stable down the group.
  • First ionisation enthalpy: N (1402) > O (1314) and P (1012) > S (1000) because of half-filled np3; down each group it falls.
  • Hydrides: E-H bond enthalpy falls down the group, so thermal stability and basicity (group 15) fall while reducing power and acidity (group 16) rise.
  • Oxides: acidic N2O3 and P2O3, amphoteric As2O3 and Sb2O3, basic Bi2O3; in group 16 the oxides SO2 and SeO2 are acidic, TeO2 amphoteric.
  • Unique behaviour: N forms N2 through pp-pp triple bonds, shows covalency up to 4, no NCl5; O is limited by its small size, forms hydrogen bonds (H2O liquid) and has no positive oxidation state except with F.

Syllabus line: p- BLOCK ELEMENTS Group -13 to Group 18 Elements General Introduction: Electronic configuration and general trends in physical and chemical properties of elements across the periods and down the groups, unique behaviour of the first element in each group. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 10 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Classification of elements and periodicity (lesson planned): Atomic size, ionisation enthalpy and electron gain enthalpy trends across a period and down a group are used in every comparison here. Read this first if those trends are shaky.
  • Atomic structure (lesson planned): Electronic configurations (ns2 np1 to np6, half-filled and filled subshells, d and f electrons inside the valence shell) decide almost every trend. Read this first if filling order is shaky.
  • Chemical bonding and molecular structure (lesson planned): Covalency, bond enthalpy and pi bonding are used to explain the first-element anomalies. Read this first if bond enthalpy is shaky.

Related topics

The concept step by step

  1. Step 1: Configurations and oxidation states

    Group 15 (N, P, As, Sb, Bi) is ns2 np3 and group 16 (O, S, Se, Te, Po) is ns2 np4. The common oxidation states are -3 and +3, +5 for group 15 and -2, +4, +6 for group 16. Down each group the lower positive state (+3 for group 15, +4 for group 16) becomes more stable because of the inert pair effect: Bi(III) is more stable than Bi(V), and Te(IV) more than Te(VI).

  2. Step 2: Ionisation enthalpy and electron gain enthalpy

    First ionisation enthalpy falls down a group: N 1402, P 1012, As 947, Sb 834, Bi 703. Across a period one expects a rise from group 15 to 16, but the half-filled np3 arrangement of group 15 is extra stable, so N (1402) is above O (1314) and P (1012) is above S (1000). The exception is not complete down the group: Te (869) is above Sb (834). Electron gain enthalpy of O is less negative than that of S because the small 2p subshell is crowded.

  3. Step 3: Hydrides and what controls their properties

    Bond enthalpy of E-H falls down each group (N-H 389, P-H 322, As-H 297, Sb-H 255; H-O 463, H-S 347, H-Se 276, H-Te 238 kJ mol⁻1). A weaker bond means lower thermal stability and stronger reducing power. In group 15 the lone pair becomes less available, so basicity falls NH3 > PH3 > AsH3 > SbH3. In group 16 the weaker H-E bond releases H+ more readily, so acid strength rises H2O < H2S < H2Se < H2Te.

  4. Step 4: Physical properties and hydrogen bonding

    Melting and boiling points generally rise down the group as van der Waals forces strengthen, but the smallest hydrides break the pattern: NH3 (239.7 K) is above PH3 (185.5 K) and H2O (373 K) is above H2S (213 K) because N and O are small and highly electronegative, so their hydrides form hydrogen bonds. After the dip the boiling points rise regularly again from PH3 to SbH3 and from H2S to H2Te.

  5. Step 5: Oxides and acid-base character

    Oxides change from acidic to basic down group 15: N2O3 and P2O3 acidic, As2O3 and Sb2O3 amphoteric, Bi2O3 basic. In group 16, SO2 and SeO2 are acidic, TeO2 and PoO2 are amphoteric. For one element, the higher oxidation state gives the more acidic oxide: SO3 is more acidic than SO2, and N2O5 more acidic than N2O3.

  6. Step 6: Unique behaviour of nitrogen and oxygen

    Nitrogen is small, forms strong pp-pp multiple bonds (N2 triple bond 945 kJ mol⁻1, against 490 for P2) so N2 is a gas while P is P4, has no d orbitals so its maximum covalency is 4 (NCl5 does not exist, PCl5 does), and its single N-N bond (160) is weak compared with P-P (213), so catenation in group 15 is not led by nitrogen. Oxygen is likewise limited by its small size and lack of d orbitals, forms hydrogen bonds (H2O is a liquid, H2S a gas), and shows a positive oxidation state only with fluorine (OF2).

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

The boiling points (K) of NH3 and PH3 are 239.7 and 185.5. By how many kelvin is NH3 higher, and what causes the difference?

Marks-style solution of example 1
StepMarks
Difference = 239.7 - 185.5 = 54.2 K.1
NH3 molecules are held by hydrogen bonds (N is small and highly electronegative); PH3 has only weak van der Waals forces.1
NH3 is 54.2 K higher than PH3.1
Total: 3 marks3

Answer: 54.2 K

Fast method: Subtract: 239.7 - 185.5.

Sanity check: If the van der Waals trend were followed, NH3 should be the lowest; the observed higher value signals hydrogen bonding.

Example 2 (easy)

The ground state of sulphur is 3s2 3p4. Using Hund's rule, how many unpaired electrons does S have?

Marks-style solution of example 2
StepMarks
The 3p subshell has three orbitals. Four electrons fill them singly first (3), then the fourth pairs up.1
Orbitals with one electron: 3 - 1 = 2.1
Unpaired electrons = 2, the same as oxygen in group 16 (ns2 np4).1
Total: 3 marks3

Answer: 2

Fast method: p-block: electrons beyond 3 pair up; 4 electrons in p gives 6 - 4 = 2 unpaired.

Sanity check: An atom with 2 unpaired electrons forms two bonds, consistent with the covalency of 2 in H2S.

Example 3 (medium)

The first ionisation enthalpies are N 1402 and O 1314 kJ mol⁻1, P 1012 and S 1000 kJ mol⁻1. Find (IE of N - IE of O) and (IE of P - IE of S), and by how much the first gap exceeds the second.

Marks-style solution of example 3
StepMarks
N minus O = 1402 - 1314 = 88 kJ mol⁻1.1
P minus S = 1012 - 1000 = 12 kJ mol⁻1.1
In both periods the group 15 element is higher than group 16, against the usual rise across a period: the half-filled np3 arrangement is more stable.1
The gap is 88 kJ mol⁻1 for N and O and 12 kJ mol⁻1 for P and S, so the first exceeds the second by 76 kJ mol⁻1: it is much smaller in the third period because the extra stability of np3 is less pronounced for the larger atom.1
Total: 4 marks4

Answer: 88 and 12 kJ mol⁻1; the first gap exceeds the second by 76 kJ mol⁻1

Fast method: Two subtractions: 1402 - 1314 and 1012 - 1000, then 88 - 12.

Sanity check: Both gaps are positive although group 16 has the higher nuclear charge: that is the half-filled-subshell anomaly, bigger in the compact second period.

Example 4 (medium)

Why does nitrogen exist as N2 but phosphorus as P4? Using the single-bond enthalpies N-N 160 and P-P 213 and triple-bond enthalpies N2 945 and P2 490 (kJ mol⁻1), compare 3 single bonds with one triple bond for each (value of 3 x single minus triple), and state which element favours the triple-bonded form.

Marks-style solution of example 4
StepMarks
Nitrogen: 3 x 160 - 945 = 480 - 945 = -465 kJ mol⁻1.1
Phosphorus: 3 x 213 - 490 = 639 - 490 = +149 kJ mol⁻1.1
A negative value means the triple bond is stronger than three single bonds: N favours N2; a positive value means three single bonds win, so P prefers P4.1
Difference between the two values = 149 - (-465) = 614 kJ mol⁻1. Small N atoms overlap well sideways (pp-pp bonding); larger P atoms do not.1
Total: 4 marks4

Answer: N: -465, P: +149 kJ mol⁻1 (difference 614)

Fast method: Compute 3 x single minus triple for each: the sign decides.

Sanity check: A sign change between period 2 and period 3 is the signature of the unique behaviour of N: multiple bonds are good only for small atoms.

Example 5 (hard, multi-step)

Equal masses, 17 g each, of NH3 and PH3 are completely atomised. Using N-H 389 and P-H 322 kJ mol⁻1 (molar masses 17 and 34 g mol⁻1), find the heat required for each and the difference.

Marks-style solution of example 5
StepMarks
Amount of NH3 = 17 / 17 = 1.0 mol; PH3 = 17 / 34 = 0.5 mol.2
Bonds per molecule: 3 for each hydride. NH3: 1.0 x 3 x 389 = 1167 kJ.1
PH3: 0.5 x 3 x 322 = 483 kJ.1
Difference = 1167 - 483 = 684 kJ more for NH3.1
Total: 5 marks5

Answer: NH3 1167 kJ, PH3 483 kJ, difference 684 kJ

Fast method: Amount first (mass / molar mass), then 3 x bond enthalpy x amount.

Sanity check: Per mole the bond enthalpy sum differs by 201 kJ (1167 - 966); equal masses give a much larger gap because PH3 has half the moles: 684 is in the right range.

Typical trap: Comparing 1 mol of each (difference 201 kJ) when the problem fixes equal masses.

Example 6 (medium)

The H-E bond enthalpies are 463 kJ mol⁻1 for H2O and 238 kJ mol⁻1 for H2Te. How many times larger is the O-H bond enthalpy, and what does this say about thermal stability and acid strength?

Marks-style solution of example 6
StepMarks
Ratio = 463 / 238 = 1.95.1
A stronger H-E bond means a more stable hydride: H2O is the most stable, H2Te the least.1
A weaker H-E bond releases H+ more readily, so H2Te is the strongest acid: the ratio is 1.95.1
Total: 3 marks3

Answer: 1.95; stability falls and acid strength rises down the group

Fast method: Divide 463 by 238: about 1.95.

Sanity check: The ratio is close to 2, in line with a large size difference between O and Te.

Formulas and units

Formula and unit box for Group 15 and 16 trends and unique behaviour
ResultFormulaValid whenUnits or noteWorked example
Valence electronsgroup 15: ns2 np3; group 16: ns2 np4neutral ground-state atoms of groups 15 and 16number = group - 10none
IE1 group 15 (kJ mol⁻1)N 1402, P 1012, As 947, Sb 834, Bi 703not applicablekJ mol⁻1Example 3
IE1 group 16 (kJ mol⁻1)O 1314, S 1000, Se 941, Te 869, Po 812not applicablekJ mol⁻1Example 3
E-H bond enthalpiesN-H 389, P-H 322, As-H 297, Sb-H 255; O-H 463, S-H 347, Se-H 276, Te-H 238not applicablekJ mol⁻1Example 5
Boiling points of hydridesNH3 239.7, PH3 185.5, AsH3 210.6, SbH3 254.6; H2O 373, H2S 213, H2Se 232, H2Te 269not applicableKExample 1
Triple versus singleN: 3 x 160 - 945 = -465; P: 3 x 213 - 490 = +149per pair of atoms: 3 single bonds against 1 triple bond; mean bond enthalpieskJ mol⁻1Example 4
Heat to atomise a hydrideq = (mass / molar mass) x (bonds per molecule) x bond enthalpycomplete atomisation; mean bond enthalpy per mole of bonds; mass converted to moleskJExample 5
Group 15 oxidesN2O3, P2O3 acidic; As2O3, Sb2O3 amphoteric; Bi2O3 basicnot applicablen/a (qualitative)none
Max covalencyN 4; P 6; O limited; S 6N has no d orbitals; heavier members can use vacant d orbitalsnumber of ligandsnone

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Saying NH3 has the lowest boiling point of the group 15 hydrides. Why it tempts: Smallest molecule, so lowest van der Waals forces seem natural; hydrogen bonding lifts it above PH3.
  • Taking the half-filled stability of N as the reason IE falls steadily down group 15. Why it tempts: The half-filled idea explains why N is unusually high, so it is stretched to explain the whole group; the steady fall from N to Bi comes from increasing atomic size and shielding.
  • Claiming NCl5 exists because PCl5 does. Why it tempts: N and P share a group; N has no 3d orbital, so covalency stops at 4.
  • Writing that thermal stability and acid strength both rise down group 16 hydrides. Why it tempts: Both are usually learnt as 'increase down the group'; stability falls with bond enthalpy while acidity rises.
  • Using 1 mol of each hydride when equal masses are given. Why it tempts: The bond-enthalpy table is per mole; the molar mass must be used to convert 17 g into moles for each compound.
  • Calling Bi2O3 amphoteric. Why it tempts: Sb2O3 is amphoteric and the pattern is remembered loosely; Bi is the most metallic and its oxide is basic.

Time per question and fast method

Target: about 75 seconds per question.

Write the data in two rows, one per group, and compare element against element. For hydrides, bond enthalpy down the group sets stability, reducing power (reverse) and acidity (reverse of stability); for first-element anomalies, ask which of small size, no d orbitals or lone-pair repulsion applies.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. Which hydride has the lowest boiling point among NH3, PH3, AsH3 and SbH3?
Show the answer

Answer: B: PH3. PH3 (185.5 K) is lowest; NH3 is raised by hydrogen bonding.

Question 2. The first ionisation enthalpy of N is higher than that of O because
Show the answer

Answer: A: N has a half-filled 2p subshell. The 2p3 arrangement of N is extra stable, so removing an electron costs more than expected.

Question 3. How many unpaired electrons does an atom of selenium (4s2 4p4) have?
Show the answer

Answer: B: 2. Four p electrons: three singly, one pairs, leaving two unpaired.

Question 4. Which oxide in group 15 is basic?
Show the answer

Answer: D: Bi2O3. Acidic nature gives way to basic: N2O3 and P2O3 are acidic, Sb2O3 is amphoteric, Bi2O3 is basic.

Question 5. The enthalpy change of H-E bond breaking in H2S is 347 and in H2Se 276 kJ mol⁻1. The ratio S-H / Se-H is closest to
Show the answer

Answer: A: 1.26. 347 / 276 = 1.257: the larger S-H enthalpy means H2S is more stable and a weaker acid than H2Se.

Question 6. Which statement about nitrogen is correct?
Show the answer

Answer: A: It forms pp-pp multiple bonds readily. Small N forms strong pp-pp multiple bonds (N2); it has no d orbitals, so NCl5 does not exist, and it catenates less than P.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Why N-N and O-O single bonds are weak

In N2H4 and H2O2 the lone pairs on the adjacent small atoms repel each other strongly across the short bond, so the single bond is weaker than expected, and weaker than P-P and S-S. This is why catenation in group 15 and 16 peaks at P and S, not at N and O. The same argument is used for the F-F bond in group 17: all three are repulsion effects of the first element.

Half-filled stability: how far the exception goes

The half-filled np3 explanation works for N against O and, in weaker form, for P against S and As against Se. By Sb and Te it fails: Te (869) is higher than Sb (834). In an exam statement, read the data pair by pair rather than assuming the exception holds along the whole group. The standard statement is for the first pair and for the elements of the second and third period; do not extend it by default.

Basicity of hydrides and the lone pair

NH3 is a much stronger base and a better ligand than PH3 because N is small and its lone pair sits in a compact, directional orbital, while the PH3 lone pair has high s character and is less available. Bond angles fall from NH3 (107 degrees) to PH3 (about 94 degrees) as the bonds use mostly p orbitals. The point examiners test is the order of basicity (NH3 > PH3 > AsH3 > SbH3) and the order of reducing power, which runs the other way.

Maximum covalency: N and O versus P and S

Nitrogen: 4 (NH4+), because it has no vacant d orbital. Phosphorus: 6 (PF6-), through 3d orbitals. Oxygen: limited, no OF6 although SF6 exists. Sulphur: 6. These are used to pick the species that does not exist (NCl5, OF6) and to explain why NF3 is not hydrolysed like PCl3. Do not extend this to industrial or structural detail beyond what the trends need.

What to remember about oxoacids and structures

The syllabus line is limited to general trends and the unique behaviour of the first element. You are not expected to recall preparation methods or detailed structures of the oxoacids here; keep to the trend statements above, which cover the typical single-correct and counting questions.

Memory hook

Suppose two scooters are parked bumper to bumper in a very narrow lane, and their riders keep elbowing each other.

  1. Because the two scooters are so close, the elbowing of one rider directly hits the other: like lone pairs on two small atoms across a short bond (N-N, O-O) repelling each other.
  2. If the scooters are parked further apart (P-P, S-S), the same elbowing matters less and the pair is more stable: the bond is stronger.
  3. If the riders instead hold on to a shared railing between them (a hydrogen bond), they stay together firmly: a small, electronegative atom (N or O) grips its neighbours, which is why NH3 and H2O have unusually high boiling points.

Small first-row atoms have strong multiple bonds but weak single bonds, and they form hydrogen bonds: the common unique features of N and O.

Small N and O: weak single bonds, strong multiple bonds, hydrogen bonds.

Revision card

Try to answer each without looking above.

  1. Write the configurations of groups 15 and 16 and the common oxidation states.
  2. Why is the first ionisation enthalpy of N higher than that of O?
  3. Arrange the hydrides of group 15 in order of boiling point and explain the exception.
  4. Give the order of thermal stability and reducing power of the hydrides of group 16.
  5. State two reasons for the unique behaviour of nitrogen.
  6. Why does NCl5 not exist while PCl5 does?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 3; fixed: 3
  • Report: content/reviews/learn5-pbl-2026-11-20.md

Textbook section references are not attached to this lesson yet.

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 10 (p-Block Elements), text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
  • NCERT Class 11 Chemistry (p-Block Elements, Classification of Elements) and Class 12 Chemistry (p-Block Elements): named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
  • Data values (ionisation enthalpies, electron gain enthalpies, bond enthalpies, boiling points, standard potentials, pKa) are standard textbook-table values given in each question or example; they were not opened from a document in this draft and must be confirmed against the textbook tables before any Verified label.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.