Group 17 and 18 Trends, Fluorine and Helium: JEE Main
Reviewed Last updated 2026-11-20. Syllabus topic: Group 17 and 18 trends and unique behaviour.
In short. Group 17 is ns2 np5 (one electron short of an octet) and group 18 is ns2 np6, with He as 1s2. Halogens are strong oxidants; noble gases are inert, with ionisation enthalpy falling down the group. Fluorine is unique through its weak F-F bond, absence of positive oxidation states and hydrogen bonding.
- Group 17 has 7 valence electrons (ns2 np5), group 18 has 8 (ns2 np6), except He (1s2).
- Electron gain enthalpy: Cl (-349) > F (-328) > Br (-325) > I (-295) in magnitude; F is the exception because of electron repulsion in the 2p subshell.
- Bond dissociation enthalpy: Cl2 (242) > Br2 (193) > F2 (158) > I2 (151); oxidising power falls F2 > Cl2 > Br2 > I2.
- Noble gas ionisation enthalpy falls down the group (He 2372 to Rn 1037), so Xe (1170) and Kr compounds exist; Xe is close to O2 (1175).
- Unique behaviour of F: only -1 oxidation state, weak F-F bond, HF is a weak acid and strongly hydrogen bonded; it makes oxygen positive in OF2.
Syllabus line: p- BLOCK ELEMENTS Group -13 to Group 18 Elements General Introduction: Electronic configuration and general trends in physical and chemical properties of elements across the periods and down the groups, unique behaviour of the first element in each group. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 10 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Classification of elements and periodicity (lesson planned): Atomic size, ionisation enthalpy and electron gain enthalpy trends across a period and down a group are used in every comparison here. Read this first if those trends are shaky.
- Atomic structure (lesson planned): Electronic configurations (ns2 np1 to np6, half-filled and filled subshells, d and f electrons inside the valence shell) decide almost every trend. Read this first if filling order is shaky.
- Chemical bonding and molecular structure (lesson planned): Covalency, bond enthalpy and pi bonding are used to explain the first-element anomalies. Read this first if bond enthalpy is shaky.
Related topics
- Group 15 and 16 trends and unique behaviour
- p-Block Elements (lesson planned)
- Classification of Elements and Periodicity (lesson planned)
- Chemical Bonding and Molecular Structure (lesson planned)
- Atomic Structure (lesson planned)
The concept step by step
Step 1: Configurations and general trend of size and energy
Group 17 (F, Cl, Br, I, At) has the outer configuration ns2 np5, one electron short of an octet, so the typical changes are X + e- giving X- and a single covalent bond. Group 18 (He, Ne, Ar, Kr, Xe, Rn) has ns2 np6, a complete octet; helium has only 1s2. Atomic radius rises down both groups.
Step 2: Ionisation enthalpy and electron gain enthalpy
Halogens have high ionisation enthalpies, so they rarely form positive ions; they are strongly electron-gaining. Electron gain enthalpy: F -328, Cl -349, Br -325, I -295 kJ mol⁻1. Chlorine is the most negative; fluorine is smaller because the added electron enters the compact 2p subshell and is repelled by the electrons already there. Noble gases have the highest ionisation enthalpy in each period (He 2372 is the highest of all) and it falls down the group to Rn 1037, and they have positive (unfavourable) electron gain enthalpies.
Step 3: Bond enthalpy and oxidising power of halogens
X-X bond dissociation enthalpy: F2 158, Cl2 242, Br2 193, I2 151 kJ mol⁻1. The expected fall from top to bottom is broken at fluorine because the lone pairs on the two small atoms repel each other. Oxidising power, measured by the standard potential for X2 to 2X-, falls steadily: F2 2.87 V, Cl2 1.36 V, Br2 1.09 V, I2 0.54 V. F2 oxidises water, and each halogen oxidises the halides below it.
Step 4: Hydrogen halides and acid strength
The H-X bond weakens down the group, so thermal stability falls (HF most stable) and acid strength in water rises: pKa values are HF 3.2, HCl -7, HBr -9, HI -10. HF is the weakest hydrogen halide acid in water, and it is a liquid-like, strongly hydrogen-bonded substance with a higher boiling point than HCl, HBr and HI, which rise from HCl to HI. Reducing power of halide ions rises I- > Br- > Cl- > F-.
Step 5: Noble gases and why they are inert
A complete octet and high ionisation enthalpies make noble gases chemically unreactive. The ionisation enthalpy falls down the group; for Xe (1170) it is close to that of O2 (1175), which suggested that Xe could form compounds with strong oxidising agents. Compounds are known for Kr, Xe and Rn, mainly with F and O. Boiling points and the van der Waals forces rise down the group, helium has the lowest boiling point of all substances.
Step 6: Unique behaviour of fluorine and helium
Fluorine is the most electronegative element with only the -1 oxidation state (OF2 makes oxygen +2); its F-F bond is weak, HF is a weak acid, it forms hydrogen bonds, and the ion F- is small with high hydration enthalpy. It forms only one oxoacid, HOF, where the other halogens form several. Helium is unique among noble gases: 1s2 (two valence electrons, not eight), the highest ionisation enthalpy, no known stable compound under normal conditions, and the lowest boiling point.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
The electron gain enthalpies (kJ mol⁻1) of F and Cl are -328 and -349. How much more energy (in kJ mol⁻1) does Cl release than F?
| Step | Marks |
|---|---|
| Cl releases 349 kJ mol⁻1 and F releases 328 kJ mol⁻1. | 1 |
| Difference = 349 - 328 = 21 kJ mol⁻1. | 1 |
| Cl is more negative by 21 kJ mol⁻1: the compact 2p subshell of F repels the incoming electron more. | 1 |
| Total: 3 marks | 3 |
Answer: 21 kJ mol⁻1
Fast method: Subtract the magnitudes: 349 - 328.
Sanity check: Fluorine breaks the expectation that the smallest atom has the most negative value; a gap of about 20 kJ mol⁻1 is small, consistent with a modest anomaly.
Example 2 (easy)
How many valence electrons does a halogen (group 17) have, and how many more does it need to reach the noble-gas configuration?
| Step | Marks |
|---|---|
| Valence electrons = group number - 10 = 17 - 10 = 7 (ns2 np5). | 1 |
| Electrons needed for ns2 np6 = 8 - 7 = 1. | 1 |
| A halogen has 7 valence electrons and needs 1 more, so it forms X- and a single bond. | 1 |
| Total: 3 marks | 3 |
Answer: 7 valence electrons; needs 1 more
Fast method: 17 - 10 = 7, and 8 - 7 = 1.
Sanity check: One electron short of an octet is why halogens are strong oxidants with a high electron gain enthalpy.
Example 3 (medium)
The bond dissociation enthalpies are F2 158 and Cl2 242 kJ mol⁻1. Find the ratio Cl2 / F2 and say why F2 is the exception to the down-the-group fall.
| Step | Marks |
|---|---|
| Ratio = 242 / 158 = 1.53. | 1 |
| A smooth fall would put F2 above Cl2; instead F2 is lower. | 1 |
| The two F atoms are small and close, so the lone pairs on the two atoms repel strongly, which weakens the F-F bond: Cl2 is 1.53 times F2. | 1 |
| Total: 3 marks | 3 |
Answer: 1.53
Fast method: Divide 242 by 158.
Sanity check: A ratio above 1 shows F2 is anomalously weak; the other halogens (Br2 193, I2 151) do fall steadily below Cl2.
Example 4 (medium)
For X2(g) + 2e- giving 2X-(g), enthalpy change = bond dissociation enthalpy + 2 x electron gain enthalpy. For Br2: bond dissociation 193 kJ mol⁻1 and electron gain -325 kJ mol⁻1. Find the value.
| Step | Marks |
|---|---|
| Bond dissociation of Br2 (two Br atoms) = +193 kJ mol⁻1. | 1 |
| Two electron gains: 2 x (-325) = -650 kJ mol⁻1. | 1 |
| Sum = 193 - 650 = -457 kJ mol⁻1. | 1 |
| Total: 3 marks | 3 |
Answer: -457 kJ mol⁻1
Fast method: 193 + 2(-325).
Sanity check: Negative, as expected for a halogen taking electrons; the magnitude lies close to those of Cl2 (-456) and I2 (-439) obtained the same way.
Example 5 (hard, multi-step)
Bartlett argued that Xe should react like O2 because their ionisation enthalpies are close. Given 1175 kJ mol⁻1 for O2 and the first ionisation enthalpies of noble gases (He 2372, Ne 2081, Ar 1521, Kr 1351, Xe 1170, Rn 1037), find the smallest absolute difference from 1175 and the gas that has it, and explain why Rn is not the closest match even though its value is lowest.
| Step | Marks |
|---|---|
| Absolute differences: He 1197, Ne 906, Ar 346, Kr 176, Xe 5, Rn 138. | 2 |
| The smallest is 5 kJ mol⁻1, for Xe. | 1 |
| Rn is lower than O2 by 138 kJ mol⁻1, so it is easier to oxidise than O2 and also fits, but it is radioactive and short-lived; Xe is the closest match, so Xe was tried. | 1 |
| Smallest gap = 5 kJ mol⁻1 (Xe). | 1 |
| Total: 5 marks | 5 |
Answer: 5 kJ mol⁻1, Xe
Fast method: Subtract 1175 from each and take the smallest modulus.
Sanity check: Ionisation enthalpy falls from He (2372) to Rn (1037); crossing 1175 between Xe and Rn confirms Xe is the nearest.
Example 6 (medium)
Fluorine is the most electronegative element, so in OF2 oxygen carries a positive oxidation number. Find it, using the rule that the sum of oxidation numbers is zero and F is -1.
| Step | Marks |
|---|---|
| Let the oxidation number of O be x. | 1 |
| x + 2(-1) = 0. | 1 |
| x = +2, so O is in the +2 state in OF2: the only common compound where O is positive, because F is more electronegative. | 1 |
| Total: 3 marks | 3 |
Answer: +2
Fast method: Two fluorines contribute -2, so oxygen is +2.
Sanity check: Oxygen otherwise has negative oxidation states; the positive value follows from fluorine being the most electronegative element and from F having no positive state.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Valence electrons | group 17: ns2 np5; group 18: ns2 np6 (He 1s2) | neutral ground-state atoms; helium is the exception with 1s2 | number = group - 10 (He: 2) | Example 2 |
| Electron gain (kJ mol⁻1) | F -328, Cl -349, Br -325, I -295 | not applicable | kJ mol⁻1 | Example 1 |
| X-X bond dissociation | F2 158, Cl2 242, Br2 193, I2 151 | not applicable | kJ mol⁻1 | Example 3 |
| Standard potential X2 to 2X- | F2 2.87, Cl2 1.36, Br2 1.09, I2 0.54 | not applicable | V | none |
| Acid strength of HX | pKa: HF 3.2, HCl -7, HBr -9, HI -10 | not applicable | pKa units | none |
| IE1 of noble gases | He 2372, Ne 2081, Ar 1521, Kr 1351, Xe 1170, Rn 1037 | not applicable | kJ mol⁻1 | Example 5 |
| Enthalpy of X2 + 2e- to 2X- | dH = D(X-X) + 2 x EGE; F2 -498, Cl2 -456 | gaseous X2 and X- ; electron gain enthalpy per atom, so counted twice | kJ mol⁻1 | Example 4 |
| Oxidation number of O in OF2 | x + 2(-1) = 0, x = +2 | neutral compound: oxidation numbers sum to zero, F is -1 | no unit | Example 6 |
| First-element anomalies of F | weak F-F bond, EGE below Cl, weak acid HF, only -1 state | not applicable | n/a (qualitative) | none |
Common mistakes and speed
- Saying fluorine has the most negative electron gain enthalpy. Why it tempts: It is the most electronegative element, so the largest value is assumed; its small 2p subshell reduces the gain, and Cl (-349) is more negative.
- Taking the bond dissociation enthalpy as F2 > Cl2 > Br2 > I2. Why it tempts: A steady fall down the group is the default for bond enthalpy; F2 is lower because of lone-pair repulsion.
- Calling HF the strongest hydrohalic acid. Why it tempts: F is the most electronegative so the H-F bond looks most polar; but the H-F bond is the strongest and HF is the weakest acid in water.
- Treating the ionisation enthalpy of noble gases as rising down the group. Why it tempts: Atomic number rises, so the nuclear pull seems greater; the size effect wins and the ionisation enthalpy falls.
- Counting the electron gain enthalpy of two atoms as one in the X2 to 2X- step. Why it tempts: The table gives one electron gain enthalpy per atom, so it is easy to use it once and forget that the equation makes two X- ions.
- Giving helium eight valence electrons. Why it tempts: Group 18 is learnt as ns2 np6; helium has only 1s2, two valence electrons.
Time per question and fast method
Target: about 75 seconds per question.
Write the four halogen values in a row and find where the pattern breaks; it is always fluorine (electron gain, bond enthalpy, acid strength). For noble gases, compare the given ionisation enthalpy with the reference value and read the group order.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- The electron gain enthalpies (kJ mol⁻1) of F, Cl, Br and I are -328, -349, -325 and -295. Which halogen has… Verified (T1)
- The first ionisation enthalpy of O2 is 1175 kJ mol⁻1. The first ionisation enthalpies of the noble gases (kJ… Verified (T1)
- Data: electron gain enthalpy (kJ mol⁻1) F -328, Cl -349; pKa of HF 3.2, HCl -7, HBr -9, HI -10; X-X bond… Verified (T1)
- For the process X2(g) + 2e- giving 2X-(g), the enthalpy change is the bond dissociation enthalpy of X2 plus… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
The exception patterns: F in group 17
Every exception in group 17 points to the small size of fluorine and the repulsion between lone pairs: lower electron gain enthalpy than Cl, lower F-F bond enthalpy than Cl-Cl, weak HF acid, and the highest hydration enthalpy of the halide ions. When a stem lists data for all four halogens and asks about a trend, scan for the place where the data goes up when the rule says down; it will involve F.
How the enthalpy of X2 giving 2X- explains oxidising power
The enthalpy change of X2(g) + 2e- giving 2X-(g) is the bond dissociation enthalpy plus twice the electron gain enthalpy. For F2 it is 158 + 2(-328) = -498 kJ mol⁻1, for Cl2 242 + 2(-349) = -456 kJ mol⁻1. F2 is more exothermic mainly because its weak F-F bond is cheap to break. This gas-phase step is only one part of oxidising power: in water, the very high hydration enthalpy of F- adds to the standard potential, which is why F2 (2.87 V) is by far the strongest oxidant.
Reading data-based statements on noble gases
Questions give ionisation enthalpies and ask which noble gases are likely to react, or which statement about the trend is correct. The ionisation enthalpy falls down the group, so only Xe and Rn lie near or below the value for O2. Statements such as 'ionisation enthalpy increases down the group' or 'electron gain is exothermic' are the standard wrong options.
Order of oxidising power and displacement
A halogen oxidises any halide below it in the group: Cl2 displaces Br- and I-, Br2 displaces I-, I2 displaces none. This follows from the order of standard potentials F2 > Cl2 > Br2 > I2, and the opposite order of reducing power for the halide ions. The reaction of F2 with water to give O2 is a consequence of its large positive potential.
What is excluded here
The syllabus line limits this chapter to general introduction, electronic configuration, trends and the unique behaviour of the first element of each group. Preparation methods, industrial processes and structures of interhalogen and noble gas compounds are not needed beyond what the trends use, and none is assumed in the questions.
Memory hook
Suppose a small kitchen is so crowded with two cooks that when a third cook enters, the cooks keep bumping into each other.
- The first cook enters the crowded kitchen but finds the room small: the added electron entering the compact 2p subshell of fluorine finds crowded electrons and is repelled a little.
- In a bigger kitchen (chlorine, 3p) the new cook has room and is welcomed more warmly: more energy released, a more negative electron gain enthalpy.
- Two cooks who stand side by side in the small kitchen bump into each other even when working together (the weak F-F bond), whereas in the larger kitchen the same pair works comfortably (a stronger Cl-Cl bond).
Small size means crowded lone pairs: smaller electron gain enthalpy and weaker X-X bond for fluorine than for chlorine.
Crowded in fluorine, roomy in chlorine.
Revision card
Try to answer each without looking above.
- State the outer configurations of groups 17 and 18, noting the exception in group 18.
- Which halogen has the most negative electron gain enthalpy, and why is it not fluorine?
- Why is the F-F bond weaker than the Cl-Cl bond?
- Order the hydrogen halides by acid strength in water.
- How does the ionisation enthalpy of the noble gases change down the group, and which can react?
- List three unique features of fluorine among the halogens.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 1; fixed: 1
- Report: content/reviews/learn5-pbl-2026-11-20.md
Textbook section references are not attached to this lesson yet.
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 10 (p-Block Elements), text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
- NCERT Class 11 Chemistry (p-Block Elements, Classification of Elements) and Class 12 Chemistry (p-Block Elements): named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
- Data values (ionisation enthalpies, electron gain enthalpies, bond enthalpies, boiling points, standard potentials, pKa) are standard textbook-table values given in each question or example; they were not opened from a document in this draft and must be confirmed against the textbook tables before any Verified label.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.