Amines: Basic Character and Identification, JEE Main Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Amines: nomenclature, structure, basic character and identification.
In short. Amines are classed primary, secondary or tertiary by the number of carbon groups on nitrogen. The lone pair on N makes them basic: aliphatic amines are stronger bases than ammonia, aromatic amines weaker. Hinsberg, carbylamine and nitrous acid tests identify the class.
- Classification counts carbon groups on N (1, 2 or 3), not the type of carbon: tert-butylamine is a primary amine.
- Names: alkanamine with the lowest locant for the amine, N-prefixes for substituents on nitrogen (N-methylethanamine).
- Aqueous basicity of methyl amines: (CH3)2NH > CH3NH2 > (CH3)3N > NH3 (inductive effect plus solvation); aniline is far weaker because the lone pair is delocalised into the ring.
- Hinsberg: primary gives a sulfonamide soluble in alkali, secondary an insoluble sulfonamide, tertiary no reaction. Carbylamine test (foul smell) is positive only for primary amines.
- Nitrous acid: aliphatic primary amines give N2 with alcohol; aromatic primary amines at 273 to 278 K give diazonium salts.
Syllabus line: ORGANIC COMPOUNDS CONTAINING NITROGEN General methods of preparation, properties, reactions and uses. Amines: Nomenclature, classification, structure, basic character and identification of primary, secondary and tertiary amines and their basic character. Diazonium Salts: Importance in synthetic organic chemistry. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 18 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Organic compounds containing oxygen (lesson planned): Acid-base character of phenols and acids, and inductive and resonance effects, are used to explain the basicity order. Read this first if those effects are unclear.
- Equilibrium (lesson planned): Kb, pKb and the pH of weak bases and their salts are used in calculations. Read this first if weak-base pH is shaky.
Related topics
- Organic Compounds Containing Oxygen (lesson planned)
- Equilibrium (lesson planned)
- Diazonium salts and their synthetic importance
The concept step by step
Step 1: Classification counts carbon groups on nitrogen
An amine has the general form R-NH2, R2NH or R3N, with R an alkyl or aryl group. Count the carbon atoms directly bonded to nitrogen: one gives a primary (1 degree) amine, two a secondary (2 degree) and three a tertiary (3 degree) amine. The class has nothing to do with whether the attached carbon is primary, secondary or tertiary, so (CH3)3C-NH2 is a primary amine. Amines are also called aliphatic or aromatic according to whether N is bonded to an alkyl carbon or directly to a benzene ring.
Step 2: Naming amines
In IUPAC names the final e of the parent alkane is replaced by amine: propan-2-amine, butan-1-amine. Choose the longest chain that carries the amino group and number it so that the amino group gets the lowest locant. Substituents on nitrogen are written with the prefix N: CH3NHCH2CH3 is N-methylethanamine and (CH3)2NC2H5 is N,N-dimethylethanamine. C6H5NH2 keeps the name aniline (benzenamine), and CH3C6H4NH2 is toluidine (methylaniline).
Step 3: Structure of the amino group
Nitrogen in an amine is sp3 hybridised with three bond pairs and one lone pair, so the shape is pyramidal and the C-N-C angle is slightly below the tetrahedral angle (in trimethylamine it is about 108 degrees). The lone pair sits in the fourth sp3 orbital and is available to take up a proton. In aniline the nitrogen is nearly planar because the lone pair overlaps with the ring pi system, which is why aniline is much less basic.
Step 4: Basic strength is about the lone pair
An amine accepts a proton: R-NH2 + H2O giving R-NH3+ + OH-, with Kb and pKb = -log Kb. A smaller pKb means a stronger base. Alkyl groups push electrons towards N (+I effect) and raise basicity over ammonia, while an aryl group or a carbonyl group draws the lone pair into delocalisation and lowers it. Electron-releasing ring substituents (CH3) raise the basicity of aniline and electron-withdrawing ones (NO2) lower it sharply.
Step 5: Why trimethylamine is not the strongest in water
In the gas phase basicity rises with the number of methyl groups, so (CH3)3N is the strongest. In water the ammonium ion is stabilised by hydrogen bonding with the solvent, and the ion with more N-H bonds is better stabilised: RNH3+ has three, R2NH2+ two and R3NH+ only one. Balancing the +I effect and the solvation gives the aqueous order (CH3)2NH > CH3NH2 > (CH3)3N > NH3 for methyl amines. For ethyl amines the tertiary amine moves above the primary amine, (C2H5)2NH > (C2H5)3N > C2H5NH2, while the secondary amine stays on top, so examiners usually give the methyl series or data.
Step 6: Identifying the class of an amine
Hinsberg test: with benzenesulfonyl chloride in aqueous alkali a primary amine gives a sulfonamide that still has an acidic N-H and dissolves in the alkali; a secondary amine gives an insoluble sulfonamide with no N-H; a tertiary amine does not react. The carbylamine test (warm with chloroform and alcoholic KOH) gives a foul-smelling isocyanide only with primary amines, aliphatic or aromatic. With nitrous acid, aliphatic primary amines give nitrogen gas and an alcohol, while aromatic primary amines at 273 to 278 K give a diazonium salt. Secondary amines, aliphatic or aromatic, give a yellow oily N-nitrosoamine (R2N-N=O) with no gas. Tertiary aliphatic amines only dissolve as the nitrite salt with no gas; tertiary aromatic amines such as N,N-dimethylaniline are nitrosated on the ring (para) to give a green C-nitroso compound. In the Hinsberg test the tertiary amine stays unreacted as an oily, alkali-insoluble layer that dissolves on adding dilute HCl, while the insoluble sulfonamide of a secondary amine does not.
Step 7: Preparation and reactions of amines
Preparation: (a) reduction of nitro compounds (Sn or Fe with HCl, or H2 over a catalyst) gives primary amines, and aniline is made this way from nitrobenzene; (b) reduction of nitriles (LiAlH4 or H2 and Ni) gives a primary amine with the same carbon count as the nitrile, RCN to RCH2NH2, so one carbon more than the alkyl halide that made the nitrile; (c) reduction of amides with LiAlH4 keeps the carbon count; (d) Hofmann bromamide degradation of RCONH2 gives RNH2 with one carbon fewer; (e) Gabriel phthalimide synthesis with a primary alkyl halide gives a pure primary amine, but it fails for aryl halides; (f) ammonolysis of an alkyl halide gives a mixture of primary, secondary, tertiary amines and the quaternary salt. Reactions: acylation with acid chlorides or anhydrides replaces an N-H and gives an amide (primary and secondary only); alkylation raises the class step by step; carbylamine and nitrous acid reactions are above. Aniline is so activated that bromine water gives 2,4,6-tribromoaniline at once. To get the mono-bromo product the NH2 is first acetylated to acetanilide, which is a weaker activator, and hydrolysed afterwards. Direct nitration with HNO3 and H2SO4 protonates the amine to the anilinium ion, a meta director, so a considerable meta product forms along with para and tar; acetylation avoids this. Uses: amines are intermediates for dyes (through diazonium salts), drugs and polymers.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
Write the IUPAC name of CH3CH2CH2CH(NH2)CH3 and find the locant of the amino group by numbering from both ends.
| Step | Marks |
|---|---|
| Longest chain carrying NH2: five carbons, so the parent is pentane. | 1 |
| Numbered from the left the NH2 is on C4; from the right it is on C2. | 1 |
| Take the lower locant, 2: the name is pentan-2-amine. | 1 |
| Total: 3 marks | 3 |
Answer: pentan-2-amine (locant 2)
Fast method: Use the smaller of the two distances to the ends: min(4, 5 + 1 - 4) = 2.
Sanity check: The locant cannot exceed half the chain length plus one, here at most 3; 2 satisfies this.
Example 2 (easy)
How many N-H bonds are there in total in ethylamine, dimethylamine, trimethylamine, aniline and diethylamine?
| Step | Marks |
|---|---|
| N-H bonds = 3 minus the number of carbon groups on N. | 1 |
| Ethylamine 2, dimethylamine 1, trimethylamine 0, aniline 2, diethylamine 1. | 1 |
| Total = 2 + 1 + 0 + 2 + 1 = 6 N-H bonds. | 1 |
| Total: 3 marks | 3 |
Answer: 6 N-H bonds
Fast method: Two primary amines give 4, two secondary give 2, the tertiary gives none.
Sanity check: Each of the five compounds has at most 2 N-H bonds, so the total is at most 10; 6 is consistent.
Example 3 (medium)
Ethylamine is taken to have pKb = 3.30 (given data). Find the pH of a 0.20 mol per litre aqueous solution at 298 K, taking Kw = 1.0 x 10⁻14.
| Step | Marks |
|---|---|
| Kb = 10⁻3.30 = 5.0 x 10⁻4. | 1 |
| Kb = x² / (0.20 - x); the quadratic gives x = [OH-] = 9.76 x 10⁻3 mol per litre. | 2 |
| pOH = 2.01. | 1 |
| pH = 14 - 2.01 = 11.99. | 1 |
| Total: 5 marks | 5 |
Answer: pH = 11.99
Fast method: x is about sqrt(Kb c) = sqrt(1.0 x 10⁻4) = 0.010, so pOH about 2.0 and pH about 12.0.
Sanity check: A weak base of 0.20 mol per litre must give a pH between 7 and 13.3 (the value for a strong base of the same concentration); 11.99 fits.
Example 4 (medium)
A mixture contains 0.10 mol each of ethylamine, diethylamine and triethylamine. It reacts completely with excess benzenesulfonyl chloride in aqueous KOH. How many moles of sulfonamide dissolve in the alkali?
| Step | Marks |
|---|---|
| Ethylamine (N-H count 2 in the amine) gives a sulfonamide that keeps one N-H, so it dissolves as its potassium salt. | 1 |
| Diethylamine gives an insoluble sulfonamide: it has no N-H left. | 1 |
| Triethylamine does not react. | 1 |
| Only the primary-amine sulfonamide dissolves: 0.10 mol. | 1 |
| Total: 4 marks | 4 |
Answer: 0.10 mol
Fast method: Only the primary amine in the mixture matters: moles of primary amine = moles of soluble sulfonamide.
Sanity check: The dissolving amount cannot exceed the 0.20 mol that react at all (primary + secondary); 0.10 mol is below it.
Example 5 (hard, multi-step)
Two amines have pKb = 3.40 (X) and pKb = 9.40 (Y). For 0.10 mol per litre solutions at 298 K find (a) Kb(X) / Kb(Y), and (b) the difference pH(X) - pH(Y).
| Step | Marks |
|---|---|
| (a) Kb ratio = 10^(9.40 - 3.40) = 10⁶. | 1 |
| (b) X: Kb = 3.98 x 10⁻4, [OH-] = 6.11 x 10⁻3 by the quadratic, pOH = 2.21, pH = 11.79. | 2 |
| Y: Kb = 3.98 x 10⁻10, [OH-] = 6.31 x 10⁻6, pOH = 5.20, pH = 8.80. | 2 |
| Difference = 11.79 - 8.80 = 2.99 (about 3, since [OH-] ratio is about the square root of 10⁶). | 1 |
| Total: 6 marks | 6 |
Answer: Kb ratio = 10⁶; pH difference = 2.99
Fast method: pH difference is about half of the pKb difference: (9.40 - 3.40) / 2 = 3.0.
Sanity check: The stronger base X gives the higher pH, and the difference of about 3 pH units corresponds to a thousand-fold change in [OH-].
Example 6 (hard, multi-step)
The five amines of formula C7H9N are o-toluidine, m-toluidine, p-toluidine, benzylamine (C6H5CH2NH2) and N-methylaniline (C6H5NHCH3). How many of them (a) give a positive carbylamine test and also (b) give an orange-red dye with 2-naphthol after cold NaNO2 and HCl? Also name the one whose benzenesulfonamide is insoluble in aqueous KOH.
| Step | Marks |
|---|---|
| Carbylamine needs a primary amine: the three toluidines and benzylamine qualify; N-methylaniline is secondary and does not. | 1 |
| A coloured azo dye needs a stable diazonium ion, which needs NH2 directly on the ring: the three toluidines qualify. Benzylamine gives an unstable aliphatic-type diazonium ion that loses N2 and gives benzyl alcohol and other products, so no dye. | 2 |
| The secondary amine N-methylaniline gives an N-H-free sulfonamide, insoluble in KOH; the primary amines give soluble sulfonamides. | 1 |
| Both conditions hold for 3 compounds (o-, m-, p-toluidine): the answer is 3. | 1 |
| Total: 5 marks | 5 |
Answer: 3 compounds (the toluidines); N-methylaniline gives the alkali-insoluble sulfonamide
Fast method: Primary: 4 of 5. Primary and NH2 on the ring: remove benzylamine, leaving 3.
Sanity check: The set satisfying both tests cannot be larger than the 4 that satisfy the carbylamine test alone; 3 is smaller, as the extra condition removes benzylamine.
Example 7 (medium)
Given pKb values at 298 K: ammonia 4.75, methylamine 3.38, dimethylamine 3.27, trimethylamine 4.22, aniline 9.40. Arrange them in decreasing basic strength in water and find Kb(dimethylamine) divided by Kb(trimethylamine).
| Step | Marks |
|---|---|
| Smaller pKb means a stronger base: dimethylamine (3.27) > methylamine (3.38) > trimethylamine (4.22) > ammonia (4.75) > aniline (9.40). | 2 |
| Kb ratio = 10^(pKb of trimethylamine - pKb of dimethylamine) = 10^(4.22 - 3.27) = 10⁰.95. | 1 |
| 10⁰.95 = 8.9. | 1 |
| Total: 4 marks | 4 |
Answer: (CH3)2NH > CH3NH2 > (CH3)3N > NH3 > C6H5NH2; ratio about 8.9
Fast method: Ratio of Kb values is ten to the power of the pKb difference: 10⁰.95 is just under 10.
Sanity check: A pKb gap of 0.95 is under one unit, so the ratio must be between 1 and 10; 8.9 fits, and the trimethylamine dip is a small effect compared with the aniline gap of about 5 units.
Example 8 (medium)
Which of these, each taken as the only organic starting material, give butan-1-amine as the clean major product? (i) butanenitrile with H2 and Ni; (ii) butanamide with LiAlH4; (iii) pentanamide with Br2 and NaOH (Hofmann); (iv) 1-bromobutane by Gabriel phthalimide synthesis; (v) butanamide by Hofmann; (vi) propanenitrile with H2 and Ni. How many?
| Step | Marks |
|---|---|
| Nitrile reduction and amide reduction keep the carbon count: (i) and (ii) give a four-carbon primary amine, butan-1-amine. | 1 |
| Hofmann bromamide removes one carbon: pentanamide gives butan-1-amine (iii), but butanamide gives propan-1-amine (v). | 1 |
| Gabriel synthesis with 1-bromobutane gives butan-1-amine cleanly (iv); propanenitrile reduction gives propan-1-amine (vi). | 1 |
| Routes (i), (ii), (iii), (iv): 4. | 1 |
| Total: 4 marks | 4 |
Answer: 4
Fast method: Track carbons: reduction and Gabriel keep the R group's carbons, Hofmann subtracts one.
Sanity check: Each route's amine carbon count equals the start carbon count (reduction, Gabriel) or one less (Hofmann); only the routes giving 4 carbons count, so at most the 6 listed and here 4.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Classes | RNH2 primary, R2NH secondary, R3N tertiary (carbon groups on N) | not applicable | count | none |
| Name pattern | alkane-e replaced by amine, locant lowest; N- prefix for groups on N | not applicable | n/a (text) | Example 1 |
| Base reaction | R-NH2 + H2O giving R-NH3+ + OH-; Kb = [RNH3+][OH-] / [RNH2] | dilute aqueous solution of the amine at 298 K; water left out of Kb | mol per litre | Example 3 |
| pKb | pKb = -log Kb; smaller pKb means stronger base | compare bases at the same temperature, normally 298 K | dimensionless | Example 3 |
| pH of weak base | x = [OH-] from x² / (c - x) = Kb; pH = 14 - pOH | one weak base in water; Kw = 1e-14 at 298 K | dimensionless | Example 3 |
| Salt of weak base | Ka(cation) = Kw / Kb; pH about (pKa + pC) / 2 | salt of weak base with strong acid; small hydrolysis; no extra acid or base | dimensionless | none |
| Aqueous order (methyl) | (CH3)2NH > CH3NH2 > (CH3)3N > NH3 > C6H5NH2 | methyl amines in aqueous solution; the gas-phase order differs | n/a (basic strength) | Example 7 |
| Hinsberg | 1 degree: sulfonamide soluble in KOH; 2 degree: insoluble; 3 degree: no reaction | excess benzenesulfonyl chloride in aqueous KOH | n/a (test result) | Example 4 |
| Carbylamine | RNH2 + CHCl3 + 3KOH giving RNC + 3KCl + 3H2O (foul smell) | primary amine only, with CHCl3 and alcoholic KOH on heating | n/a (test result) | Example 6 |
| Hofmann bromamide | RCONH2 + Br2 + 4NaOH giving RNH2 + Na2CO3 + 2NaBr + 2H2O (one carbon fewer) | primary amide with Br2 and NaOH; amine has one carbon fewer | n/a (equation) | Example 8 |
Common mistakes and speed
- Calling tert-butylamine a tertiary amine. Why it tempts: The word tertiary appears in the name and the carbon is tertiary, but the class is fixed by carbon groups on N, which here is one.
- Taking pKb as pOH, or forgetting to use concentration in the pH of a weak base. Why it tempts: In strong-base questions pOH comes straight from concentration, so a number given as pKb is read as the answer.
- Ranking (CH3)3N as the strongest methyl amine in water. Why it tempts: Three methyl groups give the largest +I effect and the gas-phase order does follow it, which is learnt first.
- Saying aniline is a stronger base than ammonia because it has a ring that pushes electrons. Why it tempts: Alkyl groups raise basicity, so any carbon group on N seems to do the same, although the ring delocalises the lone pair.
- Writing the Hinsberg sulfonamide of a secondary amine as soluble in alkali. Why it tempts: Sulfonamides are known to be acidic, and the missing N-H in the secondary-amine product is easy to overlook.
- Giving the carbylamine test for secondary and tertiary amines. Why it tempts: The chloroform and KOH test is remembered as a test for amines in general; it needs two N-H bonds to be replaced.
Time per question and fast method
Target: about 90 seconds per question.
Name: lowest locant for the amine. Class: count carbons on N. Basicity: free lone pair beats delocalised; for aniline compare donor and withdrawing ring groups. pH of a weak base: pOH about (pKb + pC) / 2. Tests: Hinsberg (soluble, insoluble, none) and carbylamine (primary only).
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- Six nitrogen compounds are listed: methylamine, propan-2-amine, 2-methylpropan-2-amine, N-methylaniline,… Verified (T1)
- The IUPAC name of CH3CH2CH(NH2)CH3 is Verified (T1)
- Methylamine has pKb = 3.40 in water at 298 K. Taking Kw = 1.0 x 10⁻14, the pH of a 0.10 mol per litre aqueous… Verified (T1)
- The total number of structural isomers (stereoisomers not counted) of the amines with molecular formula… Verified (T3)
- An amine of molecular formula C3H9N reacts with benzenesulfonyl chloride to give a product that does not… Verified (T1)
- A pure aliphatic primary amine of mass 1.18 g, on treatment with sodium nitrite and dilute hydrochloric acid,… Verified (T1)
- Aniline has pKb = 9.40 at 298 K. The pH of a 0.10 mol per litre solution of anilinium chloride (Kw = 1.0 x… Verified (T1)
- Butanamide (8.7 g; C4H9NO) is treated with bromine and aqueous sodium hydroxide (Hofmann bromamide reaction)… Verified (T1)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Classification, nomenclature and isomerism
Primary, secondary and tertiary amines are named from the number of carbon groups on N. Common names list the groups (ethylmethylamine); IUPAC names use alkanamine with locants and N- prefixes (N-methylethanamine). The amine locant takes priority in numbering over alkyl branches, so the chain is numbered to give the amino group the lowest number. Isomer counting for CnH(2n+3)N has to cover all three classes: C3H9N has 4 isomers (two primary, one secondary, one tertiary) and C4H11N has 8 (four primary, three secondary, one tertiary), ignoring stereoisomers. Amines with a chiral carbon, such as butan-2-amine, are optically active but the isomer count in examination questions normally ignores them unless stated.
Structure, hybridisation and physical properties
N is sp3 in alkyl amines with a pyramidal geometry and a lone pair; in aryl amines the lone pair conjugates with the ring. Primary and secondary amines form intermolecular N-H...N hydrogen bonds, so their boiling points are higher than those of alkanes of similar mass but lower than those of alcohols, because N is less electronegative than O. Tertiary amines cannot hydrogen-bond to each other (no N-H) and boil lower than isomeric primary amines. Lower amines are soluble in water because they can accept hydrogen bonds; solubility falls as the alkyl part grows. The order of boiling points for isomers is primary > secondary > tertiary.
Basic character: how to compare
Use three questions in order. First, is the lone pair free (alkyl amine, ammonia) or delocalised (aryl amine, amide)? Free lone pairs give stronger bases, so alkyl amines are stronger than aniline. Second, among alkyl amines, count +I groups and solvation: in water the secondary amine is generally strongest for methyl amines. Third, among anilines, electron-donating ring groups raise basicity and electron-withdrawing groups lower it, with a para nitro group having a large effect and an ortho substituent often lowering the basicity through steric hindrance to solvation of the ion. Typical magnitudes: methylamine pKb about 3 to 4, ammonia about 4.75, aniline about 9.4 (the question will usually supply the value it needs).
Identification and what examiners test
Examiners test: counting primary, secondary and tertiary amines and isomers; the IUPAC name or the locant; ranking basic strength, including in water against the gas phase; pH and Kb of an amine or of its ammonium salt; the product and solubility in the Hinsberg test; carbylamine and nitrous acid tests as the key to a structure puzzle; and the reduction or Hofmann bromamide routes to a primary amine. Hofmann bromamide reaction converts RCONH2 to RNH2 with one carbon fewer, and the carbylamine product is an isocyanide, RNC. Do not confuse the Hinsberg result (the sulfonamide of a primary amine dissolves in KOH) with the amine itself being soluble.
Memory hook
Suppose you are holding the last empty seat at a bus stop, and people keep asking you to give it up for a heavy bag.
- An ordinary person (a plain alkyl amine) hands the seat over readily: the free seat is the lone pair, ready to take a proton.
- If you are busy holding your friend close (aniline: the lone pair shared with the ring), you cannot easily give the seat to a newcomer, so you are a weaker base.
- If you wear a heavy coat that gets in the way (an electron-withdrawing nitro group pulling on the ring), giving up the seat is even harder.
Basic strength is how easily the lone pair on nitrogen is offered to a proton; delocalising or withdrawing groups make it harder to offer.
Free lone pair, strong base; shared or pulled lone pair, weak base.
Revision card
Try to answer each without looking above.
- Define primary, secondary and tertiary amines by carbon groups on nitrogen, with one example each.
- Write the IUPAC name of CH3NHCH2CH3 and say how the locant is chosen for amines.
- Give the aqueous basic-strength order of NH3, CH3NH2, (CH3)2NH, (CH3)3N and aniline, and the reason for the dip at the tertiary amine.
- State the Hinsberg result for each class of amine.
- Which class gives the carbylamine test, and what is the product?
- How are the pH of 0.10 M of a weak base and of its ammonium salt found from pKb?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 5; fixed: 5
- Report: content/reviews/learn7-nit-2026-11-20.md
Textbook references
- NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 9: Amines, Summary Summary (read 2026-11-22)
- NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 9: Amines, 9.6 Chemical Reactions (read 2026-11-22)
- NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 9: Amines, 9.2 Classification (read 2026-11-22)
- NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 9: Amines, 9.3 Nomenclature (read 2026-11-22)
- NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 9: Amines, 9.1 Structure of Amines (read 2026-11-22)
- NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 9: Amines, 9.5 Physical Properties (read 2026-11-22)
- NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 9: Amines, 9.4 Preparation of Amines (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 18, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
- NCERT Class 12 Chemistry, Amines chapter: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.