Transition Elements: Trends and Properties, JEE Main
Reviewed Last updated 2026-11-21. Syllabus topic: Transition elements: general trends and properties.
In short. The first-row transition elements (Sc to Zn) have partly filled 3d subshells in the atom or a common ion. Variable oxidation states, coloured ions, paramagnetism, catalysis, complexes, interstitial compounds and alloys all follow from d electrons. Count d electrons as Z - charge - 18.
- Configuration (n-1)d1-10 ns1-2 with exceptions Cr (3d5 4s1) and Cu (3d10 4s1); the 4s electrons are lost first on ionisation.
- Atomic radii fall from Sc to about Fe, stay nearly constant, then rise at Cu and Zn; ionisation enthalpy rises slowly with irregularities at d5 and d10.
- Highest oxidation state equals the number of 4s plus 3d electrons up to Mn (+7); Sc is only +3 and Zn only +2.
- Colour appears for d1 to d9 ions (d-d transitions); d0 and d10 ions are colourless.
- Spin-only magnetic moment = sqrt(n(n + 2)) BM, with n unpaired electrons.
Syllabus line: d - and f- BLOCK ELEMENTS Transition Elements - General introduction, electronic configuration, occurrence and characteristics, general trends in properties of the first-row transition elements - physical properties, ionization enthalpy, oxidation states, atomic radii, colour, catalytic behaviour, magnetic properties, complex formation, interstitial compounds, alloy formation, preparation, properties and uses of K2Cr2O7 and KMnO4. Inner Transition Elements Lanthanoids - Electronic configuration, oxidation states and Lanthanoid contraction. Actinoids - Electronic configuration and oxidation states. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 11 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Quantum numbers, orbital shapes and electronic configuration: Aufbau, Hund rule and the half-filled and filled stability are used in every line. Read this first if writing the configuration of Cr or Cu is unclear.
- Periodic trends: radii, ionisation enthalpy, electron gain enthalpy, valence and oxidation states: The d-block trends are compared with the regular main-group trends. Read this first if effective nuclear charge and shielding are unfamiliar.
Related topics
The concept step by step
Step 1: What makes an element a transition element
A transition element has a partly filled d subshell in the atom or in one of its common ions. Sc to Cu in the first row qualify (Sc3+ is d0, but Sc atom is 3d1 4s2). Zn, Cd and Hg have d10 in the atom and in the +2 ion, so strictly they are not transition elements, though they are studied with the d block.
Step 2: Electronic configuration and the 4s rule
The general form is (n-1)d1-10 ns1-2. In the first row 4s fills before 3d, but once d electrons are present 3d lies below 4s, so on ionisation the 4s electrons leave first. Fe is [Ar] 3d6 4s2; Fe3+ is [Ar] 3d5. Cr is 3d5 4s1 and Cu is 3d10 4s1, because half-filled and filled d subshells are extra stable. The number of d electrons in an ion is Z - charge - 18.
Step 3: Radii, density and ionisation enthalpy
Across the first row the nuclear charge rises, but the added electrons go into inner 3d, which shield poorly, so radii fall from Sc to about Fe and then stay nearly constant. At Cu and Zn the d10 repulsion makes the radius rise. Ionisation enthalpy increases slowly. Irregularities follow stability: the second ionisation enthalpy of Cr and Cu is high because the ion M+ is d5 or d10, and the third of Mn and Zn is high because M2+ is d5 or d10.
Step 4: Oxidation states
Both 4s and 3d electrons can be used, so most elements show several oxidation states differing by one unit. The highest state equals the total of 4s and 3d electrons up to Mn: Ti +4, V +5, Cr +6, Mn +7. After Mn the highest state falls (Fe +6 is rare; Fe +2 and +3 are common; Co and Ni +2; Cu +1 and +2; Zn +2). The higher states appear mainly in oxides and fluorides and oxo anions such as CrO4²- and MnO4⁻.
Step 5: Colour and magnetic moment
A d1 to d9 ion can absorb visible light to promote an electron between d orbitals split by the surroundings; the colour seen is the complement of what is absorbed. d0 ions (Sc3+, Ti4+) and d10 ions (Cu+, Zn2+) have no d-d transition and are colourless. Unpaired d electrons give paramagnetism; the spin-only moment is mu = sqrt(n(n + 2)) BM, giving 1.73, 2.83, 3.87, 4.90 and 5.92 BM for n = 1 to 5.
Step 6: Catalysis, complexes, interstitial compounds and alloys
Variable oxidation state and free surface valencies make transition metals and their compounds catalysts: V2O5 in the contact process, finely divided Fe in the Haber process, Ni in hydrogenation. Small, highly charged ions with empty d orbitals form many complexes. Small atoms (H, C, N) fit into the voids of the metal lattice to give hard, high-melting, non-stoichiometric interstitial compounds such as TiC. Metals with radii within about 15 percent form alloys such as brass and bronze.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
Find the d-electron count and the spin-only magnetic moment of Mn2+ (Z = 25).
| Step | Marks |
|---|---|
| Mn2+ has 25 - 2 = 23 electrons: [Ar] 3d5 (the 4s electrons go first). | 1 |
| d5 in five orbitals: n = 5 unpaired electrons. | 1 |
| mu = sqrt(5 x 7) = sqrt 35 = 5.92 BM. | 1 |
| Total: 3 marks | 3 |
Answer: 5 unpaired electrons; mu = 5.92 BM
Fast method: d5 gives n = 5, so sqrt 35.
Sanity check: Between sqrt 24 = 4.90 (n = 4) and sqrt 48 = 6.93 (n = 6): 5.92 fits and is the maximum for the d block.
Example 2 (easy)
Find the highest oxidation state of Mn (Z = 25) and of Cr (Z = 24), assuming all 4s and 3d electrons are used.
| Step | Marks |
|---|---|
| Electrons beyond argon: Mn 25 - 18 = 7 (3d5 4s2); Cr 24 - 18 = 6 (3d5 4s1). | 1 |
| Highest oxidation state equals this count: Mn +7, Cr +6. | 1 |
| Sum of the two highest states = 7 + 6 = 13. | 1 |
| Total: 3 marks | 3 |
Answer: Mn +7, Cr +6
Fast method: Z - 18 up to Mn.
Sanity check: Mn +7 appears in MnO4⁻ and Cr +6 in CrO4²-: the numbers match the known oxo anions.
Example 3 (medium)
Cu2+ (Z = 29) is blue in water but Cu+ is colourless. Find the number of d electrons and spin-only moment of Cu2+ and the d count of Cu+.
| Step | Marks |
|---|---|
| Cu2+: 29 - 2 - 18 = 9 d electrons; Cu+: 29 - 1 - 18 = 10. | 1 |
| d9 has 1 unpaired electron, so mu = sqrt(1 x 3) = 1.73 BM. | 1 |
| d10 (Cu+) has no d-d transition, hence colourless and diamagnetic. | 1 |
| Total: 3 marks | 3 |
Answer: Cu2+: d9, mu = 1.73 BM; Cu+: d10, colourless
Fast method: d9 has one hole, so n = 1.
Sanity check: A single unpaired electron always gives sqrt 3 = 1.73 BM, the smallest nonzero value.
Example 4 (medium)
How many unpaired electrons does a gaseous Cr atom (Z = 24) have?
| Step | Marks |
|---|---|
| Chromium is the exception: 3d5 4s1, not 3d4 4s2. | 2 |
| All five 3d orbitals and the 4s orbital hold one electron each. | 1 |
| Unpaired electrons = 5 + 1 = 6. | 1 |
| Total: 4 marks | 4 |
Answer: 6
Fast method: Use 3d5 4s1: 5 + 1.
Sanity check: Six is the largest number of unpaired electrons for any atom in the first row, as expected for the most stable half-filled arrangement.
Example 5 (hard, multi-step)
A hydrated ion absorbs light of wavelength 600 nm because of a d-d transition. With h = 6.626 x 10⁻34 J s, c = 3.00 x 10⁸ m s⁻1 and Avogadro constant 6.022 x 10²3 mol⁻1, find the energy per mole in kJ.
| Step | Marks |
|---|---|
| Energy per photon E = hc / lambda = 6.626 x 10⁻34 x 3.00 x 10⁸ / 6.00 x 10⁻7 = 3.313 x 10⁻19 J. | 2 |
| Per mole: 3.313 x 10⁻19 x 6.022 x 10²3 = 1.995 x 10⁵ J mol⁻1. | 1 |
| Convert to kJ: 199.5 kJ mol⁻1 (the energy gap is about 200 kJ per mole). | 1 |
| Total: 4 marks | 4 |
Answer: about 199.5 kJ per mole
Fast method: hc N_A = 0.1197 J m mol⁻1; divide by 6 x 10⁻7 m: 1.995 x 10⁵ J.
Sanity check: Visible light (400 to 700 nm) corresponds to about 170 to 300 kJ per mole, so 199.5 sits inside the range.
Example 6 (hard, multi-step)
The spin-only magnetic moment of a first-row ion is 4.90 BM. Find the number of unpaired electrons, and say which of Cr2+ and Fe2+ (Z = 24, 26) could be this ion.
| Step | Marks |
|---|---|
| n(n + 2) = mu squared = 4.90 squared = 24.01, so n = -1 + sqrt(1 + 24.01) = 4.0. | 2 |
| Cr2+: 24 - 2 - 18 = 4 d electrons, all unpaired: n = 4. | 1 |
| Fe2+: d6 has 10 - 6 = 4 unpaired electrons. Both ions have n = 4. | 2 |
| Total: 5 marks | 5 |
Answer: n = 4; both Cr2+ and Fe2+
Fast method: n = -1 + sqrt(1 + mu squared) = 4.
Sanity check: n must be a whole number between 0 and 5; 4.0 passes that test.
Example 7 (easy)
Cu (metallic radius 128 pm) and Zn (134 pm) form brass. By what percentage does the Zn radius exceed that of Cu, and does the 15 percent rule allow an alloy?
| Step | Marks |
|---|---|
| Difference = 134 - 128 = 6 pm. | 1 |
| Percentage = 6 / 128 x 100 = 4.69 percent. | 1 |
| 4.69 percent is less than 15 percent, so substitution in the lattice is possible and an alloy forms. | 1 |
| Total: 3 marks | 3 |
Answer: 4.69 percent; yes, an alloy is possible
Fast method: 6 / 128 is about 1 / 21.
Sanity check: The difference is under 5 percent, comfortably below the 15 percent limit; neighbours in the d block always differ little.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| d electrons of an ion | d = Z - charge - 18 (first row, 4s emptied) | First-row ion with 4s emptied; Z is atomic number of the element | number | Example 1 |
| Spin-only magnetic moment | mu = sqrt(n(n + 2)) | Spin-only value; n is the number of unpaired d electrons | BM (Bohr magneton) | Example 1 |
| Moment table | n = 1, 2, 3, 4, 5 gives 1.73, 2.83, 3.87, 4.90, 5.92 | Spin-only values; read-off table for n unpaired electrons | BM | Example 1 |
| Unpaired electrons for dn | n = d for d up to 5; n = 10 - d for d above 5 | High-spin free ion; d electrons singly filled across five d orbitals first | number | Example 1 |
| Highest oxidation state | number of 4s + 3d electrons, Sc to Mn | Sc to Mn only; all 4s and 3d electrons used | number | Example 2 |
| Photon energy per mole | E = N_A h c / lambda | Energy of one mole of photons of wavelength lambda in metres | J per mol (divide by 1000 for kJ) | Example 5 |
| Alloy rule | radii within about 15 percent | Rough guide for substitutional alloys; metallic radii compared | percent | Example 7 |
| Exception configurations | Cr 3d5 4s1; Cu 3d10 4s1 | not applicable | n/a (configuration) | Example 4 |
Common mistakes and speed
- Removing 3d electrons before 4s electrons when forming an ion (Fe3+ as 3d3 4s2). Why it tempts: 4s fills first, so it seems it should leave last, but once the atom is ionised 3d lies below 4s and the 4s electrons leave first.
- Writing Cr as 3d4 4s2 and Cu as 3d9 4s2. Why it tempts: The regular filling order predicts those and the exceptions need to be remembered.
- Counting unpaired electrons as the d count for d6 to d9 ions (Fe2+ as 6, Ni2+ as 8). Why it tempts: The count rises correctly up to d5 and it is easy to carry on without noting that pairing begins at d6.
- Saying that Zn2+ or Sc3+ is coloured because the metal is a d-block element. Why it tempts: The element is in the block, but the ion has an empty or full d subshell with no d-d transition.
- Using the formula n(n + 2) for the moment without the square root. Why it tempts: The formula is often quoted as n(n + 2) for mu squared and the square root is dropped under time pressure.
Time per question and fast method
Target: about 80 seconds per question.
Convert every ion to a d count with d = Z - charge - 18 before reading the options. Then use the unpaired-electron ladder 1, 2, 3, 4, 5, 4, 3, 2, 1, 0 for d1 to d10 and the moment table 1.73, 2.83, 3.87, 4.90, 5.92. Colour needs d1 to d9; skip d0 and d10 at once.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- Atomic number of iron is 26. Treating the 4s electrons as removed first on ionisation, the spin-only magnetic… Verified (T1)
- Treat an ion as coloured in aqueous solution if its 3d subshell is partly filled (1 to 9 electrons). Out of… Verified (T1)
- In their highest oxidation states, assume the first-row elements Ti (Z = 22), V (Z = 23), Cr (Z = 24) and Mn… Verified (T1)
- A hydrated first-row transition metal ion is coloured because it absorbs light of wavelength 500 nm in a d-d… Verified (T1)
- Using the spin-only formula mu squared = n(n + 2) in BM squared, where n is the number of unpaired electrons… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Electronic configuration and ionisation of the first series
Sc [Ar]3d1 4s2, Ti 3d2 4s2, V 3d3 4s2, Cr 3d5 4s1, Mn 3d5 4s2, Fe 3d6 4s2, Co 3d7 4s2, Ni 3d8 4s2, Cu 3d10 4s1, Zn 3d10 4s2. For ions remove 4s electrons first, so d count = Z - charge - 18 as long as the ion has lost at least the 4s electrons. Edge cases: Cu+ is d10, Cu2+ is d9; Fe3+ is d5, hence the great stability of the +3 state compared with +2; Mn2+ is d5 and is unusually stable. Examiners ask for the number of d electrons, the number of unpaired electrons and the configuration of Cr and Cu.
Physical properties and atomic radii
The metals are hard, with high melting points, high boiling points and high density, because both (n-1)d and ns electrons take part in metallic bonding. The melting point rises to a maximum near the middle of the series (about Cr, where d5 gives the greatest number of unpaired electrons for bonding) and falls toward Zn; Mn is lower than its neighbours because the d5 s2 arrangement gives weak metallic bonding, and Zn, Cd and Hg are low (d10, no d bonding). Density generally rises to Cu as radius falls and mass rises (Zn, at 7.1 g per cm3, is less dense than Cu). Atomic radius decreases then flattens: the d electrons shield poorly, so the effective nuclear charge rises only slowly.
Ionisation enthalpy and oxidation states
First ionisation enthalpies rise across the row from Sc to Zn, since the 4s electron is shielded by the 3d set, but irregularly (NCERT calls this trend irregular and of little chemical significance; the removal of one electron alters the relative energies of 4s and 3d). The irregularities with a clear cause are in the second values: the second ionisation enthalpy of Cr and Cu is high because M+ is d5 or d10 (and the third of Mn and Zn is high because M2+ is d5 or d10). Oxidation states: Sc +3 only, Ti +2 to +4, V +2 to +5, Cr +2, +3, +6, Mn +2 to +7, Fe +2, +3, Co +2, +3, Ni +2, Cu +1, +2, Zn +2. Cu+ in water disproportionates: 2Cu+ gives Cu2+ plus Cu. The stability of the +2 state rises toward the right of the row, and the stability of the highest states falls.
Colour, magnetic properties and what examiners test
Colour needs d-d transitions, so Sc3+, Ti4+, Cu+ and Zn2+ are colourless while Ti3+, V3+, Cr3+, Mn2+, Fe3+, Co2+, Ni2+ and Cu2+ are coloured in suitable surroundings. Oxo anions such as MnO4⁻ and CrO4²- (formally d0) are intensely coloured by charge transfer instead. Magnetic moment: mu = sqrt(n(n + 2)) BM using unpaired electrons n; the free-ion value is the working approximation for the first row. Typical tasks: count coloured ions in a list, rank ions by magnetic moment, find n from a given moment using n = -1 + sqrt(1 + mu squared), and convert a wavelength to energy per mole.
Occurrence of the first-row metals
The first-row transition metals occur combined, mostly as oxides and sulfides, and are extracted by reduction. Typical ores: titanium as rutile (TiO2) and ilmenite (FeTiO3); chromium as chromite (FeCr2O4); manganese as pyrolusite (MnO2); iron as haematite (Fe2O3) and magnetite (Fe3O4); copper as copper pyrites (CuFeS2); zinc as zinc blende (ZnS). Chromite and pyrolusite are the starting materials for K2Cr2O7 and KMnO4 on the next page.
Catalytic behaviour, interstitial compounds and alloys
Catalysis: the metal can adsorb reactants on its surface and use variable oxidation states to form unstable intermediates, as with V2O5 (SO2 to SO3), Fe (N2 + 3H2 to 2NH3), Ni (hydrogenation), and Pd or Pt in many hydrogenations. Interstitial compounds trap H, C or N in the lattice voids; they are usually hard, rigid and higher melting than the pure metal, keep metallic conduction, and are chemically inert and non-stoichiometric (for example TiC, Fe3H, VH0.56). Alloys arise because the atomic radii of neighbouring transition metals differ by not more than about 15 percent, so one replaces the other in the lattice: brass (Cu and Zn), bronze (Cu and Sn), steel (Fe with interstitial C).
Memory hook
Suppose a railway platform in Pune has five benches, and ten passengers arrive one at a time, each choosing a bench.
- The first five passengers each take a separate bench (Hund rule), so one person per bench: five lone passengers.
- With five on five benches the platform looks perfectly balanced; a sixth passenger has to sit beside someone, and from then on each new passenger pairs up and removes one lone passenger.
- So the number of lone passengers rises to five and then falls to zero at ten: 1, 2, 3, 4, 5, 4, 3, 2, 1, 0.
Lone passengers are unpaired d electrons: the count rises to five at d5 and falls to zero at d10, and the spin-only moment follows sqrt(n(n + 2)).
Unpaired electrons climb to five, then pair down to zero.
Revision card
Try to answer each without looking above.
- Write the configurations of Cr and Cu and explain why they are exceptions.
- How many d electrons does Fe3+ have, and which electrons leave first on ionisation?
- State the unpaired-electron count for d1 to d10 and the spin-only moment formula.
- Why are Sc3+, Ti4+, Cu+ and Zn2+ colourless?
- What decides the highest oxidation state up to Mn, and what is it for Mn?
- Name two interstitial compounds or catalysts of transition metals and the reason they form.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 3; fixed: 3
- Report: content/reviews/learn8-dfb-2026-11-21.md
Textbook references
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 4: The d- and f-Block Elements, 4.3.4 Oxidation States (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 4: The d- and f-Block Elements, 4.3.14 Alloy Formation (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 4: The d- and f-Block Elements, 4.2 Electronic Configurations of the d-Block Elements (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 4: The d- and f-Block Elements, 4.1 Position in the Periodic Table (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 4: The d- and f-Block Elements, 4.3.3 Ionisation Enthalpies (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 4: The d- and f-Block Elements, 4.3.1 Physical Properties (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 4: The d- and f-Block Elements, 4.3.9 Magnetic Properties (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 4: The d- and f-Block Elements, 4.3.12 Catalytic Properties (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 4: The d- and f-Block Elements, 4.3.13 Formation of Interstitial Compounds (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 11, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
- NCERT Class 12 Chemistry, the d- and f-Block Elements chapter: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.