EngineeringRise

Valence Bond Theory, Crystal Field Theory and Magnetism

Reviewed Last updated 2026-11-20. Syllabus topic: Valence bond theory, crystal field theory, colour and magnetic properties.

In short. Valence bond theory: ligand lone pairs fill empty hybrid orbitals (d2sp3 inner, sp3d2 outer, sp3, dsp2). Crystal field theory: octahedral d orbitals split into t2g (-0.4 Delta_o) and eg (+0.6 Delta_o); strong field (Delta_o above P) gives low spin. Moment = sqrt(n(n + 2)) BM; colour is d-d absorption.

  • Octahedral inner-orbital complexes use d2sp3 (low spin); outer-orbital complexes use sp3d2 (high spin); tetrahedral uses sp3 and square planar uses dsp2.
  • Octahedral splitting puts t2g at -0.4 Delta_o and eg at +0.6 Delta_o; tetrahedral puts e at -0.6 Delta_t and t2 at +0.4 Delta_t with Delta_t = 4/9 Delta_o.
  • A d4 to d7 ion is low spin when Delta_o exceeds the pairing energy P and high spin when it does not; tetrahedral complexes are almost always high spin.
  • Spin-only magnetic moment = sqrt(n(n + 2)) Bohr magnetons, with n the number of unpaired electrons: 1.73, 2.83, 3.87, 4.90, 5.92 for n = 1 to 5.
  • Colour arises from d-d transitions with energy Delta = hc/lambda; d0 and d10 ions have no d-d transition and are colourless.

Syllabus line: COORDINATION COMPOUNDS Introduction to coordination compounds. Werner's theory, ligands, coordination number, denticity, chelation, IUPAC nomenclature of mononuclear co-ordination compounds, isomerism, Bonding: Valence bond approach and basic ideas of Crystal field theory, colour and magnetic properties, importance of coordination compounds (in qualitative analysis, extraction of metals and in biological systems). (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 12 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

Related topics

The concept step by step

  1. Step 1: Valence bond view

    Valence bond theory treats each ligand as donating a lone pair into an empty hybrid orbital on the metal. Six pairs fill d2sp3 (using inner (n - 1)d orbitals, low spin) or sp3d2 (using outer nd orbitals, high spin) hybrids and give an octahedral ion; four pairs fill sp3 (tetrahedral) or dsp2 (square planar). In a strong-field case electrons in the d orbitals are first paired to vacate two d orbitals for d2sp3; in a weak-field case the d electrons are left alone and the outer nd orbitals are used, so the complex has the same number of unpaired electrons as the free ion.

  2. Step 2: Magnetism from unpaired electrons

    Count unpaired electrons n and use the spin-only formula mu = sqrt(n(n + 2)) in Bohr magnetons (BM). A complex with n = 0 is diamagnetic (repelled by a field); n above 0 is paramagnetic. The moments for n = 1 to 5 are 1.73, 2.83, 3.87, 4.90 and 5.92 BM. For example [Fe(CN)6]3- (d2sp3, 1 unpaired) has 1.73 BM while [FeF6]3- (sp3d2, 5 unpaired) has 5.92 BM. Valence bond theory explains shape and magnetism but cannot explain colour or say why a ligand is strong or weak.

  3. Step 3: Crystal field splitting

    Crystal field theory models ligands as point charges that repel the d electrons. In an octahedral field the five d orbitals split into a lower t2g set (three orbitals, -0.4 Delta_o each) and a higher eg set (two orbitals, +0.6 Delta_o each) so that the average energy is unchanged. In a tetrahedral field the order reverses: e is lower (-0.6 Delta_t), t2 is higher (+0.4 Delta_t), and Delta_t is about 4/9 of Delta_o for the same metal and ligands. Ligands that cause large splitting (CN-, CO, en, NH3) are strong-field; those that cause small splitting (I-, Br-, Cl-, F-, OH-) are weak-field, as the spectrochemical series orders them.

  4. Step 4: High spin, low spin and CFSE

    For d4 to d7 in an octahedral field, an electron can either enter eg (cost Delta_o) or pair in t2g (cost the pairing energy P). If Delta_o is less than P the electrons spread out (high spin); if Delta_o is greater than P they pair first (low spin). d1 to d3 and d8 to d10 have no choice. The crystal field stabilisation energy is CFSE = (-0.4 n(t2g) + 0.6 n(eg)) Delta_o, with pairing energy not included in the JEE convention. Tetrahedral Delta_t is small, so the pairing cost is higher than Delta_t and tetrahedral complexes are almost always high spin.

  5. Step 5: Colour and importance

    A complex is coloured when it absorbs visible light to promote an electron between split d levels (a d-d transition); the colour seen is complementary to the light absorbed, and the energy absorbed is Delta = hc/lambda. A d0 ion (Sc3+) or d10 ion (Zn2+) has no d-d transition and is colourless. Importance of coordination compounds: qualitative analysis (nickel with dimethylglyoxime, copper with ammonia), extraction of metals (silver and gold dissolved as cyanide complexes), and biological systems (haemoglobin contains iron, chlorophyll magnesium, vitamin B12 cobalt).

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

Find the spin-only magnetic moment of [Cr(H2O)6]3+ (Cr3+ is d3).

Marks-style solution of example 1
StepMarks
d3 in an octahedral field: t2g3, three unpaired electrons.1
mu = sqrt(n(n + 2)) = sqrt(3 x 5) = sqrt 15.1
mu = 3.87 BM.1
Total: 3 marks3

Answer: 3.87 BM

Fast method: n = 3 gives sqrt 15 = 3.87.

Sanity check: Between 1.73 (n = 1) and 4.90 (n = 4), as expected for n = 3.

Example 2 (easy)

How many unpaired electrons are present in the strong-field octahedral complex [Co(NH3)6]3+ (Co3+ is d6)?

Marks-style solution of example 2
StepMarks
Strong field: Delta_o greater than P, so electrons pair in t2g first.1
d6 gives t2g6 eg0: every electron is paired.1
Unpaired electrons = 0; the ion is diamagnetic (d2sp3).1
Total: 3 marks3

Answer: 0

Fast method: Low-spin d6 fills all three t2g orbitals with pairs.

Sanity check: Zero is the only possible count for six electrons in three orbitals that each hold two.

Example 3 (medium)

A d1 ion [Ti(H2O)6]3+ absorbs at 500 nm, taken as Delta_o. Using h = 6.626e-34 J s, c = 3.00e8 m s⁻1 and N_A = 6.022e23 mol⁻1, find Delta_o in kJ per mole.

Marks-style solution of example 3
StepMarks
Delta_o = N_A h c / lambda.1
= 6.022e23 x 6.626e-34 x 3.00e8 / 500e-9 J mol⁻1.1
= 2.394e5 J mol⁻1 = 239.4 kJ mol⁻1.1
Total: 3 marks3

Answer: 239.4 kJ mol⁻1

Fast method: N_A h c is 0.1197 J m mol⁻1 and divided by 500e-9 m gives 2.39e5 J.

Sanity check: About 240 kJ per mole is the energy of a visible photon per mole, as expected for 500 nm.

Example 4 (medium)

Find the CFSE, in units of Delta_o, of an octahedral low-spin d7 ion such as the strong-field complex of Co2+.

Marks-style solution of example 4
StepMarks
Low-spin d7: t2g6 eg1.1
CFSE = 6(-0.4) + 1(+0.6) = -2.4 + 0.6.1
CFSE = -1.8 Delta_o.1
Total: 3 marks3

Answer: -1.8 Delta_o

Fast method: Six in t2g at -0.4, one in eg at +0.6.

Sanity check: Between the d6 low-spin value of -2.4 and the high-spin d7 value of -0.8, as expected: more stabilised than high spin.

Example 5 (hard, multi-step)

Compare [Fe(H2O)6]3+ (weak field) and [Fe(CN)6]3- (strong field), both octahedral Fe3+ (d5). Find the difference of their spin-only moments in BM and name the hybridisations.

Marks-style solution of example 5
StepMarks
Fe3+ is d5. Weak field: high spin t2g3 eg2, 5 unpaired, sp3d2 (outer-orbital).2
Strong field: t2g5, 1 unpaired, d2sp3 (inner-orbital).1
Moments: sqrt 35 = 5.92 BM and sqrt 3 = 1.73 BM; difference = 5.916 - 1.732 = 4.18 BM (about 4.2 BM).2
Total: 5 marks5

Answer: 4.18 BM (sp3d2 versus d2sp3)

Fast method: Moments 5.92 and 1.73; subtract.

Sanity check: Both moments lie between 1.73 and 5.92 (the extreme values for d5), and the high-spin value is the largest possible for any d ion.

Example 6 (hard)

Ni2+ (d8) forms [Ni(CN)4]2- and [NiCl4]2-. A student says both are square planar and both are diamagnetic. Find the spin-only moment of the tetrahedral [NiCl4]2- and correct the student.

Marks-style solution of example 6
StepMarks
Chloride is a weak-field ligand and gives a tetrahedral, sp3 complex: the d8 electrons are not forced to pair.1
Tetrahedral d8 is e4 t2⁴, giving 2 unpaired electrons.2
mu = sqrt(2 x 4) = sqrt 8 = 2.83 BM: paramagnetic. Only [Ni(CN)4]2- (dsp2, square planar) is diamagnetic.2
Total: 5 marks5

Answer: 2.83 BM for [NiCl4]2-

Fast method: Tetrahedral d8: 2 unpaired, sqrt 8 = 2.83.

Sanity check: Two unpaired electrons: more than the 0 of the square planar ion and well below 5.92 (the maximum for d5).

Typical trap: Ni2+ is not always square planar: only strong-field cyanide forces dsp2 pairing; chloride gives tetrahedral sp3 with 2 unpaired electrons.

Formulas and units

Formula and unit box for Valence bond theory, crystal field theory, colour and magnetic properties
ResultFormulaValid whenUnits or noteWorked example
Spin-only momentmu = sqrt(n(n + 2))spin-only value; n = unpaired electrons, orbital contribution ignoredBohr magneton (BM)Example 1
Octahedral orbital energiest2g = -0.4 Delta_o; eg = +0.6 Delta_ooctahedral crystal field; energies measured from the average levelenergy (Delta_o)Example 4
Tetrahedral orbital energiese = -0.6 Delta_t; t2 = +0.4 Delta_t; Delta_t = (4/9) Delta_otetrahedral field; Delta_t = 4/9 Delta_o for same metal and ligandenergy (Delta_t)none
CFSE octahedral(-0.4 n(t2g) + 0.6 n(eg)) Delta_o (pairing energy excluded)octahedral complexes; pairing energy not includedDelta_oExample 4
High or low spinlow spin if Delta_o > P (d4 to d7 only)octahedral d4 to d7 ions; Delta_o > P low spin, else high spinn/a (comparison of energies)Example 2
Energy of absorptionDelta = N_A h c / lambdawavelength of d-d absorption taken as the splitting DeltaJ mol⁻1 or kJ mol⁻1Example 3
d-electron count of first-row iond = Z - 18 - charge (4s emptied first)first-row cations of charge +2 or more, once 4s is emptieddimensionless integernone
Hybridisation by geometryoctahedral d2sp3 / sp3d2; tetrahedral sp3; square planar dsp2VBT: d2sp3 low spin, sp3d2 high spin, dsp2 strong-field d8 square planarn/a (text)Example 5

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Counting d electrons from the neutral atom instead of the ion. Why it tempts: The neutral iron atom is 3d6 4s2, and that 3d6 is easily misread as the configuration of the ion; Fe2+ has 6 and Fe3+ has 5 electrons in 3d after losing the 4s electrons first.
  • Calling every octahedral d6 complex diamagnetic. Why it tempts: The well-known cases ([Co(NH3)6]3+, [Fe(CN)6]4-) are low spin, so the pattern is over-generalised; [Fe(H2O)6]2+ and [CoF6]3- are high spin.
  • Using octahedral CFSE values for a tetrahedral ion. Why it tempts: The octahedral table is memorised, and the tetrahedral ion is described in Delta_t, which differs by a factor of 4/9.
  • Assuming d8 Ni2+ is always square planar and diamagnetic. Why it tempts: The cyanide complex is the usual example, but the geometry depends on the ligand field.
  • Saying the colour seen is the colour absorbed. Why it tempts: Absorption of one colour leaves its complement, which is what the eye sees.

Time per question and fast method

Target: about 90 seconds per question.

Write the d count of the ion (Z - charge - 18 for the first row). Decide high or low spin (weak-field ligand or Delta_o less than P: high spin). Fill t2g then eg (or e then t2), count unpaired electrons and CFSE. Moment: 1.73, 2.83, 3.87, 4.90, 5.92 for n = 1 to 5.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. A complex has 5 unpaired electrons. Its spin-only magnetic moment, in BM, is
Show the answer

Answer: D: 5.92. mu = sqrt(5 x 7) = sqrt 35 = 5.92 BM.

Question 2. The number of d electrons in Mn2+ (atomic number 25) is
Show the answer

Answer: C: 5. Mn is [Ar] 3d5 4s2; two 4s electrons are lost, leaving 3d5.

Question 3. The octahedral CFSE of a d3 ion, in Delta_o, is
Show the answer

Answer: C: -1.2. t2g3 at -0.4 each gives -1.2 Delta_o.

Question 4. Which ion is colourless in aqueous solution?
Show the answer

Answer: A: Sc3+ (d0). A d0 ion has no electron to promote, so there is no d-d absorption.

Question 5. The ratio Delta_t / Delta_o for the same metal and ligands is about
Show the answer

Answer: B: 4/9. Delta_t = (4/9) Delta_o.

Question 6. The hybridisation in the low-spin [Fe(CN)6]4- is
Show the answer

Answer: B: d2sp3. Strong-field cyanide pairs the d6 electrons, leaving two (n - 1)d orbitals empty for d2sp3.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Valence bond theory: inner and outer orbital complexes

Octahedral complexes use six empty hybrid orbitals. If the metal d electrons pair up to leave two (n - 1)d orbitals empty, hybridisation is d2sp3 (inner-orbital, low spin); if the (n - 1)d orbitals are untouched, the six orbitals come from one ns, three np and two nd (sp3d2, outer-orbital, high spin). Tetrahedral uses sp3 (Ni2+ in [NiCl4]2- has two unpaired electrons, paramagnetic). Square planar uses dsp2 (Ni2+ in [Ni(CN)4]2-: d8 electrons pair in four d orbitals, leaving one for dsp2: diamagnetic). Cr3+ is d3 and uses d2sp3 whatever the ligand, because it already has two empty d orbitals. Limitations: no explanation of colour, no quantitative treatment, no basis for ligand strength.

Crystal field splitting: formulas and the spectrochemical series

Octahedral: t2g at -0.4 Delta_o, eg at +0.6 Delta_o. Tetrahedral: e at -0.6 Delta_t, t2 at +0.4 Delta_t, Delta_t = 4/9 Delta_o. Square planar splitting is more complex and is not tested numerically. Spectrochemical series (weak to strong): I- < Br- < SCN- < Cl- < S2- < F- < OH- < C2O4 2- < H2O < NCS- < edta4- < NH3 < en < CN- < CO. Delta_o also grows with the oxidation state of the metal and from the first to the later transition series, so Fe3+ complexes split more than Fe2+ ones with the same ligand and 4d and 5d complexes are almost always low spin.

Spin state and CFSE: the arithmetic

Fill the d electrons into the split levels with Hund rule: for high spin, one electron in each of the five orbitals before pairing; for low spin, fill all three t2g orbitals, pair there, then place the remainder in eg. Octahedral CFSE for configuration t2g(a) eg(b) is (-0.4a + 0.6b) Delta_o. Values: d1 -0.4; d2 -0.8; d3 -1.2; d4 high -0.6, low -1.6; d5 high 0, low -2.0; d6 high -0.4, low -2.4; d7 high -0.8, low -1.8; d8 -1.2; d9 -0.6; d10 0. Tetrahedral CFSE for d7 is -1.2 Delta_t, so some JEE items mix the two units; write Delta_o or Delta_t carefully.

Colour, energy of absorption and what examiners test

Energy absorbed per mole is N_A h c / lambda; for lambda = 500 nm it is 239.4 kJ per mole, or 20 000 cm⁻1 as wavenumber. A stronger field raises Delta and shifts the absorption to shorter wavelength. Colour is not the absorbed colour but its complement. Examiners test: (1) unpaired electron count and spin-only moment; (2) high versus low spin from Delta_o and P or from a ligand in the spectrochemical series; (3) CFSE in units of Delta; (4) hybridisation and geometry from the number of unpaired electrons; (5) which of a list of ions are coloured; (6) the effect of replacing a ligand on the absorbed wavelength. Traps: tetrahedral d7 CFSE confused with octahedral; Ni2+ assumed square planar with weak ligands; counting the d electrons from the neutral atom instead of the ion.

Memory hook

Suppose you are placing a small steel tiffin box on a shelf between two rows of heavy rice sacks at a kirana store: the sacks above push down and the sacks below are pressed less.

  1. If the sacks come down with a big push (a strong field), it is cheaper for two small tiffin boxes to share one slot than for one to climb to the top shelf: the electrons pair up in the lower level.
  2. If the push is gentle (a weak field), each tiffin box takes its own slot, including the top shelf, and the shelf load is spread out: the electrons stay unpaired.
  3. The shopkeeper counting loose boxes in separate slots is counting unpaired electrons; more loose boxes means a stronger pull on a magnet-like tester.

A strong field costs more to climb than to pair, so electrons pair in the lower t2g level (low spin); a weak field lets them spread over both levels (high spin).

Compare Delta with pairing energy: climb if climbing is cheaper, pair if pairing is cheaper.

Revision card

Try to answer each without looking above.

  1. State the two octahedral d-orbital sets and their energies in units of Delta_o.
  2. How do you decide between high and low spin for d4 to d7?
  3. Give the spin-only formula and the five values for n = 1 to 5.
  4. Which hybridisation goes with inner-orbital octahedral, outer-orbital octahedral, tetrahedral and square planar complexes?
  5. Why are d0 and d10 complexes colourless?
  6. What is the relation between Delta_t and Delta_o?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 2; fixed: 2
  • Report: content/reviews/learn7-crd-2026-11-20.md

Textbook references

  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 5: Coordination Compounds, 5.5.4 Crystal Field Theory (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 5: Coordination Compounds, 5.5.1 Valence Bond Theory (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 5: Coordination Compounds, 5.5.2 Magnetic Properties of Coordination Compounds (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 5: Coordination Compounds, 5.5.3 Limitations of Valence Bond Theory (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 5: Coordination Compounds, 5.5.5 Colour in Coordination Compounds (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 5: Coordination Compounds, 5.7 Importance and Applications of Coordination Compounds (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 12, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
  • NCERT Class 12 Chemistry, Coordination Compounds chapter: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.