Integrated Rate Laws and Half-Life: JEE Main Solutions
Reviewed Last updated 2026-11-20. Syllabus topic: Integrated rate laws and half-life.
In short. Zero order: [A] = [A]0 - kt, half-life [A]0/(2k), proportional to [A]0. First order: [A] = [A]0 e^(-kt), half-life 0.693/k, independent of [A]0. The straight-line plots are [A] against t (zero) and ln[A] against t (first).
- Zero order: rate = k, [A] = [A]0 - kt, t1/2 = [A]0/(2k), complete in [A]0/k.
- First order: ln[A]0/[A] = kt, t1/2 = 0.693/k; after n half-lives the fraction left is (1/2)ⁿ.
- The first-order half-life does not depend on [A]0; the zero-order half-life is proportional to [A]0.
- Percent completed: t = (2.303/k) log(100/(100 - x)); 75 percent takes two half-lives, 99.9 percent about ten.
- For gas-phase reactions in a closed vessel, convert total pressure to the pressure of the reactant using the mole change.
Syllabus line: CHEMICAL KINETICS Rate of a chemical reaction, factors affecting the rate of reactions: concentration, temperature, pressure and catalyst, elementary and complex reactions, order and molecularity of reactions, rate law, rate constant and its units, differential and integral forms of zero and first-order reactions, their characteristics and half-lives, the effect of temperature on the rate of reactions, Arrhenius theory, activation energy and its calculation, collision theory of bi-molecular gaseous reactions (no derivation). (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 8 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Rate of reaction, rate law and order: Integrated laws come from the rate law. Read this first if order and the unit of k are unclear.
- Indefinite integrals and methods: The derivation integrates d[A]/[A] to give a logarithm. Read this first if the integral of 1/x is unfamiliar.
Related topics
The concept step by step
Step 1: From rate law to concentration against time
The rate law gives the slope of the concentration curve at each instant. To get the concentration at any time we integrate the rate law. Two forms are in the syllabus: the differential form (the rate law itself, -d[A]/dt = k[A]ⁿ) and the integral form (the result of integrating it). We need them for zero and first order only.
Step 2: Zero order, a straight line
For zero order, -d[A]/dt = k, so the rate is constant: [A] falls by the same amount each second. Integrating gives [A] = [A]0 - kt, a straight line against t with slope -k. The reaction ends at t = [A]0/k, because concentration cannot be negative. The unit of k is mol L⁻1 s⁻1.
Step 3: First order, an exponential decay
For first order, -d[A]/dt = k[A]. Separate variables, d[A]/[A] = -k dt, and integrate from [A]0 at t = 0 to [A] at t: ln[A] - ln[A]0 = -kt. So [A] = [A]0 e^(-kt) and k = (1/t) ln([A]0/[A]) = (2.303/t) log10([A]0/[A]). ln[A] plotted against t is a straight line of slope -k, and k has unit s⁻1.
Step 4: Half-life
Half-life t1/2 is the time for the concentration to fall to half. Put [A] = [A]0/2: first order gives t1/2 = ln 2 / k = 0.693/k, the same at every stage; zero order gives t1/2 = [A]0/(2k), which shrinks as the reaction proceeds. This difference is how the two orders are told apart in a data table.
Step 5: Fractions and percentage completion
For first order, after n half-lives the fraction left is (1/2)ⁿ: 50, 25, 12.5, 6.25 percent. So 75 percent completion takes two half-lives and 87.5 percent takes three. For awkward percentages use t = (2.303/k) log10(100/(100 - x)). Do not add percentages: after two equal time intervals of 50 percent completion the reaction is 75 percent complete, not 100 percent.
Step 6: Gas reactions followed by pressure
In a closed rigid vessel at constant temperature, pressure is proportional to the number of moles. If A(g) giving 2B(g) + C(g) starts with pressure P0 of A, and a pressure x of A reacts, the total is P0 + 2x, and p(A) = P0 - x. Convert the measured total pressure to p(A) first and then apply the first-order law to p(A) in place of [A].
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
A first-order reaction has k = 2.31 x 10⁻2 min⁻1. Find the half-life.
| Step | Marks |
|---|---|
| For first order t1/2 = 0.693 / k. | 1 |
| t1/2 = 0.693 / 2.31 x 10⁻2 min⁻1. | 1 |
| t1/2 = 30.0 min. | 1 |
| Total: 3 marks | 3 |
Answer: 30 min
Fast method: 0.693/2.31 = 0.30, so 0.30 x 100 = 30.
Sanity check: k about 0.02 min⁻1 means about 2 percent per minute, so a half-life of tens of minutes is reasonable.
Example 2 (easy)
A zero-order reaction starts at [A]0 = 0.60 mol L⁻1 with k = 1.5 x 10⁻3 mol L⁻1 s⁻1. How long does it take to finish?
| Step | Marks |
|---|---|
| Zero order: [A] = [A]0 - kt. | 1 |
| Complete consumption: [A] = 0, so t = [A]0 / k. | 1 |
| t = 0.60 / 1.5 x 10⁻3 = 400 s. | 1 |
| Total: 3 marks | 3 |
Answer: 400 s
Fast method: 0.60 / 0.0015 = 400.
Sanity check: Units: (mol L⁻1) / (mol L⁻1 s⁻1) = s. The half-life would be 200 s, half of this.
Example 3 (medium)
A first-order reaction has k = 5.0 x 10⁻3 s⁻1. What percentage of the reactant has reacted after 200 s?
| Step | Marks |
|---|---|
| [A]/[A]0 = e^(-kt) = e^(-5.0 x 10⁻3 x 200) = e^(-1). | 2 |
| e^(-1) = 0.368, so 36.8 percent is left. | 1 |
| Reacted = 100 - 36.8 = 63.2 percent. | 1 |
| Total: 4 marks | 4 |
Answer: 63.2 percent
Fast method: kt = 1, a time of exactly one lifetime, so 1 - 1/e = 0.632.
Sanity check: kt = 1 is a little more than a half-life (0.693), so slightly over 50 percent, namely 63 percent, is sensible.
Example 4 (medium)
A first-order reaction is 50 percent complete in 20 min. How long does it take to reach 75 percent completion?
| Step | Marks |
|---|---|
| 50 percent complete in 20 min, so t1/2 = 20 min. | 1 |
| 75 percent complete means 25 percent is left: (1/2)², two half-lives. | 2 |
| Time = 2 x 20 = 40 min. | 1 |
| Total: 4 marks | 4 |
Answer: 40 min
Fast method: Fractions 50, 25: two halvings, so double the half-life.
Sanity check: The first 50 percent took 20 min and the next 25 percent (half of the remainder) takes another 20 min, total 40 min, not 30 min.
Example 5 (hard, multi-step)
A reactant has concentrations 0.80, 0.40 and 0.20 mol L⁻1 at 0, 100 and 200 s. Show that the reaction is first order, find k, and find the concentration at 350 s.
| Step | Marks |
|---|---|
| Each 100 s halves the concentration, so the half-life is constant at 100 s: first order. | 2 |
| k = 0.693 / 100 s = 6.93 x 10⁻3 s⁻1. | 1 |
| 350 s is 3.5 half-lives, so [A] = 0.80 x (1/2)³.5. | 2 |
| [A] = 0.80 x 0.0884 = 0.0707 mol L⁻1. | 1 |
| Total: 6 marks | 6 |
Answer: first order; k = 6.93 x 10⁻3 s⁻1; [A] = 0.0707 mol L⁻1
Fast method: Half-life 100 s gives 3.5 halvings: 0.80/11.31 = 0.0707.
Sanity check: Between 3 halvings (0.100) and 4 halvings (0.050), so 0.0707 is in the right interval.
Example 6 (hard, multi-step)
A(g) giving B(g) + C(g) is first order. In a rigid vessel at constant temperature with pure A at 100 mm Hg, the total pressure is 150 mm Hg after 20 min. Find k and the total pressure at 40 min.
| Step | Marks |
|---|---|
| If x of A reacts, total = P0 + x, so x = 50 and p(A) = 50 mm Hg at 20 min. | 2 |
| p(A) halved in 20 min: t1/2 = 20 min and k = 0.693 / 20 = 0.0347 min⁻1. | 1 |
| At 40 min (two half-lives) p(A) = 25 mm Hg, so x = 75. | 2 |
| Total pressure = 100 + 75 = 175 mm Hg. | 1 |
| Total: 6 marks | 6 |
Answer: k = 0.0347 min⁻1; total pressure = 175 mm Hg
Fast method: p(A) halves each 20 min: 100, 50, 25; total = 200 - p(A) = 175.
Sanity check: Total pressure is bounded by 200 mm Hg (complete reaction doubles the moles): 175 is below this.
Example 7 (medium)
How many half-lives does a first-order reaction need to reach 99 percent completion?
| Step | Marks |
|---|---|
| Fraction left is 0.01 = (1/2)ⁿ. | 1 |
| n = log10(100) / log10(2) = 2 / 0.301. | 1 |
| n = 6.64 half-lives. | 1 |
| Total: 3 marks | 3 |
Answer: 6.64 half-lives
Fast method: 2⁶ = 64 and 2⁷ = 128, so 100 lies between 6 and 7 half-lives: about 6.6.
Sanity check: Between 6 (98.4 percent complete) and 7 (99.2 percent complete) half-lives, consistent with 99 percent.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Zero order (integral) | [A] = [A]0 - kt | zero-order reaction, until [A] reaches 0 | mol L⁻1 s⁻1 (k in this unit) | Example 2 |
| Zero order half-life | t1/2 = [A]0 / (2k); completion time = [A]0 / k | zero-order reaction; rate independent of [A] | s | Example 2 |
| First order (integral) | ln([A]0/[A]) = kt, k = (2.303/t) log10([A]0/[A]) | first-order reaction in A, constant temperature | s⁻1 (k in this unit) | none |
| First order exponential | [A] = [A]0 e^(-kt) | first-order reaction in A, constant temperature | mol L⁻1 | Example 3 |
| First order half-life | t1/2 = 0.693 / k (independent of [A]0) | first-order reaction only; not valid for zero or second order | s | Example 1 |
| Fraction left | (1/2)ⁿ after n half-lives | first-order reaction (constant half-life), n half-lives | dimensionless | Example 4 |
| Time for x percent | t = (2.303/k) log10(100/(100 - x)) | first-order reaction; x is percent reacted, 0 <= x < 100 | s | none |
| Linear plots | zero: [A] against t (slope -k); first: ln[A] against t (slope -k) | zero order for [A] vs t; first order for ln[A] vs t | slope in mol L⁻1 s⁻1 (zero) or s⁻1 (first) | none |
| Gas, A giving B + C | Pt = P0 + x; p(A) = 2P0 - Pt | first-order A giving B + C, gas, constant V and T, only A at start | mm Hg or atm | Example 6 |
Common mistakes and speed
- Using t1/2 = 0.693/k for a zero-order reaction. Why it tempts: The formula 0.693/k is the most memorised half-life, and the question may not announce the order clearly.
- Adding percentages (50 percent in 20 min, so 75 percent in 30 min). Why it tempts: Percentages feel additive, and an arithmetic progression is more natural than a geometric one.
- Using the total pressure in place of the pressure of A in a gas-phase first-order problem. Why it tempts: The only data given are total pressures, and the formula k = (2.303/t) log(P0/Pt) looks complete.
- Using ln and log10 interchangeably, for example 0.693 with 2.303 mixed in one expression. Why it tempts: Both constants appear in the same chapter, and each is remembered without a note of which logarithm it belongs to.
- Stating that a first-order reaction goes to completion in a finite time, or that a zero-order reaction goes on forever. Why it tempts: The exponential tail looks like it ends on a graph, and a straight line looks as if it has no bound.
Time per question and fast method
Target: about 100 seconds per question.
Count half-lives first: percentages 50, 75, 87.5, 93.75 correspond to 1, 2, 3, 4 half-lives, so most first-order questions need no logarithm. For zero order use [A]0/(2k) and [A]0/k. For gas pressure, write p(A) in terms of the total pressure from the mole change before touching the rate law.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
- A first-order reaction has a rate constant of 3.465 x 10⁻3 min⁻1. The half-life of the reaction, in minutes,… Verified (T1)
- A gas decomposes on a metal surface by a zero-order reaction with k = 2.0 x 10⁻3 mol L⁻1 s⁻1. If the initial… Verified (T1)
- The concentration of a reactant in a first-order reaction falls from 0.80 mol L⁻1 to 0.20 mol L⁻1 in 40… Verified (T1)
- The gas-phase reaction A(g) giving 2B(g) + C(g) is first order in A. Starting with pure A at a pressure of 80… Verified (T1)
- A zero-order reaction has a half-life of 40 minutes when the initial concentration is 0.50 mol L⁻1. The same… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Zero-order reactions: differential and integral form
Differential form: rate = -d[A]/dt = k[A]⁰ = k. Integral form: [A] = [A]0 - kt, a straight line with slope -k and intercept [A]0, for t up to [A]0/k when the reactant is used up. Half-life: t1/2 = [A]0/(2k), directly proportional to [A]0; the time of completion is twice the half-life. The unit of k is mol L⁻1 s⁻1 (or atm s⁻1). A graph of rate against concentration is a horizontal line. Zero-order behaviour is seen when the rate is controlled by something other than the reactant concentration, such as a saturated catalyst surface; this is the physical reason for the constant rate.
First-order reactions: differential and integral form
Differential form: -d[A]/dt = k[A]. Integral form: ln[A] = ln[A]0 - kt, or [A] = [A]0 e^(-kt), or k = (2.303/t) log10([A]0/[A]). The plot of ln[A] (or log10[A]) against t is a straight line with slope -k (or -k/2.303). The rate against concentration is a straight line through the origin. k has the unit s⁻1 (time⁻1) and so the numerical value of k depends on the time unit used (min⁻1 or s⁻1) but not on the concentration unit. When the data are given as pressures or as volumes of a titrant, the ratio [A]0/[A] is replaced by the same ratio of those quantities if each is proportional to the amount of A.
Half-life and its characteristics
For a first-order reaction the half-life is t1/2 = 0.693/k, independent of [A]0: the concentration halves in each equal interval, so the series of concentrations 0.80, 0.40, 0.20 at equal time gaps is the signature of first order. For a zero-order reaction t1/2 = [A]0/(2k). The unit of t1/2 is time. Quick relations for first order: 75 percent in 2 t1/2, 87.5 percent in 3 t1/2, 99 percent in about 6.64 t1/2, 99.9 percent in about 9.97 t1/2. The time for any fraction f of completion is t = (1/k) ln(1/(1 - f)).
Gas-phase reactions followed by pressure or volume
Problems often give total pressure Pt at time t. For A(g) giving B(g) + C(g) with initial pressure P0 of A: Pt = P0 + x and p(A) = P0 - x = 2P0 - Pt. For A(g) giving 2B(g) + C(g): Pt = P0 + 2x and p(A) = (3P0 - Pt)/2. For A(g) giving 2B(g): Pt = P0 + x. Always derive from the mole change of the equation, never from memory of a formula for one case. Then k = (2.303/t) log10(P0/p(A)). The temperature and volume must be constant. Edge case: if the initial pressure includes an inert gas, subtract it before using the formula.
Comparison of orders, graph reading and what examiners test
Zero order: [A] against t linear, t1/2 proportional to [A]0, k in mol L⁻1 s⁻1. First order: ln[A] against t linear, t1/2 independent of [A]0, k in s⁻1. Examiners test: half-life from k and the reverse, number of half-lives from a percentage, the concentration after a non-integer number of half-lives, completion time of a zero-order reaction after a change in [A]0, pressure-based first-order problems, selecting the correct plot, and the fact that percentages are not additive. Integrated forms of orders higher than first are not part of the syllabus line, and are not needed here.
Memory hook
Suppose a water tank on a terrace in Indore is emptied through two different taps.
- The first tap is a plain tap with the flow fixed by a stopcock: it removes the same number of litres each minute whether the tank is full or nearly empty. The level falls in a straight line and a tank twice as full takes twice as long to halve: zero order.
- The second tap works as if its flow depends on how much water is above it, so it drains fast when full and slowly when nearly empty. Each time the level halves it takes the same time to halve again, however full the tank started: first order.
- The plain tap empties the tank completely at a definite moment; the second tap keeps halving and, in principle, never reaches zero.
Zero order is a constant loss per minute (linear, half-life proportional to the starting amount); first order is a constant fraction lost per minute (exponential, fixed half-life).
Zero order loses the same amount each minute; first order loses the same fraction each minute.
Revision card
Try to answer each without looking above.
- Write the integral rate law and the half-life for a zero-order reaction.
- Write the integral rate law and the half-life for a first-order reaction, and say which depends on [A]0.
- What fraction remains after 4 half-lives, and what percentage has reacted?
- Which plot is a straight line for zero order and which for first order, and what is the slope?
- How is the pressure of A found from the total pressure for A(g) giving 2B(g) + C(g)?
- Why are percentages of completion not added for a first-order reaction?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 0; fixed: 0
- Report: content/reviews/learn2-kin2-2026-11-20.md
Textbook references
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 3: Chemical Kinetics, 3.3.1 Zero Order Reactions (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 3: Chemical Kinetics, 3.3.2 First Order Reactions (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 3: Chemical Kinetics, 3.3.3 Half-Life of a Reaction (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 8, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
- NCERT Class 12 Chemistry, Chemical Kinetics chapter: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.