EngineeringRise

Rate of Reaction, Rate Law and Order: JEE Main Notes

Reviewed Last updated 2026-11-20. Syllabus topic: Rate of reaction, rate law and order.

In short. Rate of reaction is the change in concentration per unit time divided by the stoichiometric coefficient. The rate law, rate = k[A]ᵐ[B]ⁿ, is fixed by experiment, not by the equation; order is m + n, and k has units (mol L⁻1)^(1 - order) s⁻1.

  • For aA + bB giving cC + dD, rate = -(1/a) d[A]/dt = -(1/b) d[B]/dt = (1/c) d[C]/dt = (1/d) d[D]/dt.
  • Order comes from experiment (initial-rate tables); molecularity is the number of species colliding in one elementary step, a whole number 1, 2 or rarely 3.
  • For an elementary reaction the rate law can be written from the equation; for a complex reaction the slowest step decides the rate.
  • Unit of k = (mol L⁻1)^(1 - n) s⁻1: s⁻1 for first order, L mol⁻1 s⁻1 for second, mol L⁻1 s⁻1 for zero.
  • Concentration and pressure (for gases) change the rate; temperature and a catalyst change k.

Syllabus line: CHEMICAL KINETICS Rate of a chemical reaction, factors affecting the rate of reactions: concentration, temperature, pressure and catalyst, elementary and complex reactions, order and molecularity of reactions, rate law, rate constant and its units, differential and integral forms of zero and first-order reactions, their characteristics and half-lives, the effect of temperature on the rate of reactions, Arrhenius theory, activation energy and its calculation, collision theory of bi-molecular gaseous reactions (no derivation). (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 8 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Some basic concepts of chemistry (lesson planned): Balanced equations and mole ratios fix every coefficient used to compare rates. Read this first if stoichiometry is shaky.
  • Equilibrium (lesson planned): Forward and backward rates, and the effect of a catalyst on both, link to equilibrium ideas. Read this first if the idea of rate against extent is unclear.

Related topics

The concept step by step

  1. Step 1: Rate means change per unit time, scaled by the coefficient

    Chemical kinetics asks how fast a reaction goes. For A giving products, the average rate over a time interval is the change in concentration divided by the time, and the instantaneous rate is the slope of the tangent to the concentration-time curve. Reactants decrease and products increase, so we put a minus sign on reactant terms to keep the rate positive. The unit is mol L⁻1 s⁻1 (or atm s⁻1 for gases).

  2. Step 2: One reaction, one rate

    In 2N2O5 giving 4NO2 + O2, NO2 appears twice as fast as N2O5 disappears, and four times as fast as O2 appears. To get a single number for the reaction, divide each rate by its coefficient: rate = -(1/2) d[N2O5]/dt = (1/4) d[NO2]/dt = d[O2]/dt. Questions that give one species and ask for another are solved by this ratio alone.

  3. Step 3: What changes the rate

    Higher concentration (or higher pressure of a gas, which raises concentration) means more collisions per second, so the rate rises. Higher temperature raises the rate constant sharply, and a catalyst raises it by giving a path with lower activation energy; both act on k, not on concentrations. The size of each effect on the rate is written by the rate law and by the Arrhenius equation (see the third lesson of this chapter).

  4. Step 4: Rate law, order and rate constant

    The rate law relates rate to concentrations: rate = k[A]ᵐ[B]ⁿ. The exponents m and n are found by experiment, and the order is m + n. The rate constant k is the rate when every concentration is 1 mol L⁻1; it does not depend on concentration but does depend on temperature and catalyst. A reaction can have zero, whole-number or fractional order.

  5. Step 5: Units of k follow from the order

    Rate has units mol L⁻1 s⁻1 and the concentration term has units (mol L⁻1)ⁿ, so k has units (mol L⁻1)^(1 - n) s⁻1. Zero order gives mol L⁻1 s⁻1, first order gives s⁻1, second order gives L mol⁻1 s⁻1 and third order gives L² mol⁻2 s⁻1. If k is given with its units, you can read the order back from them.

  6. Step 6: Elementary and complex reactions, order and molecularity

    An elementary reaction happens in one step, as written, so its molecularity (the number of species that collide) is 1, 2 or rarely 3, and its rate law follows the equation. A complex reaction is a sequence of elementary steps; the slowest step controls the rate, and the order is read from experiment, so it need not match the coefficients. Molecularity is never zero or a fraction; order can be.

  7. Step 7: Initial-rate tables

    To find an order, compare two experiments in which only one concentration changes. If doubling [A] makes the rate 4 times, the order in A is 2 (since 2² = 4). If two concentrations change together, remove the effect of the one whose order you already know. Then use any experiment to get k, and keep the units of k.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

For N2(g) + 3H2(g) giving 2NH3(g), H2 disappears at 0.045 mol L⁻1 s⁻1. Find the rate of formation of NH3.

Marks-style solution of example 1
StepMarks
Rate of reaction = (1/3) x 0.045 = 0.015 mol L⁻1 s⁻1 (divide by the coefficient 3).1
Rate of formation of NH3 = 2 x rate of reaction (coefficient 2).1
Rate of formation of NH3 = 2 x 0.015 = 0.030 mol L⁻1 s⁻1.1
Total: 3 marks3

Answer: 0.030 mol L⁻1 s⁻1

Fast method: Ratio of coefficients: NH3 : H2 = 2 : 3, so 0.045 x 2/3 = 0.030.

Sanity check: NH3 forms more slowly than H2 disappears because its coefficient is smaller; 0.030 is less than 0.045, as expected.

Example 2 (easy)

The rate law of a reaction is rate = k[A]²[B]. At [A] = [B] = 0.10 mol L⁻1 the rate is 2.0 x 10⁻4 mol L⁻1 s⁻1. Find the overall order and the value and unit of k.

Marks-style solution of example 2
StepMarks
Overall order = 2 + 1 = 3.1
k = rate / ([A]²[B]) = 2.0 x 10⁻4 / (0.10)³.1
k = 2.0 x 10⁻4 / 1.0 x 10⁻3 = 0.20.1
Unit for order 3: L² mol⁻2 s⁻1, so k = 0.20 L² mol⁻2 s⁻1.1
Total: 4 marks4

Answer: k = 0.20 L² mol⁻2 s⁻1

Fast method: Divide the rate by 10⁻3 (the cube of 0.10): 2.0 x 10⁻4 / 10⁻3 = 0.20.

Sanity check: Check units: 0.20 L² mol⁻2 s⁻1 x (0.10 mol L⁻1)³ = 2.0 x 10⁻4 mol L⁻1 s⁻1, the unit of a rate.

Example 3 (medium)

Initial rates for A + B giving products: (1) [A] = 0.10, [B] = 0.10 mol L⁻1, rate 3.0 x 10⁻4 mol L⁻1 s⁻1; (2) [A] = 0.20, [B] = 0.10, rate 1.2 x 10⁻3; (3) [A] = 0.20, [B] = 0.20, rate 2.4 x 10⁻3. Find the rate law and k.

Marks-style solution of example 3
StepMarks
Runs 1 and 2: [A] x 2 gives rate x 4, so order in A = 2.2
Runs 2 and 3: [B] x 2 gives rate x 2, so order in B = 1.1
Rate = k[A]²[B]; from run 1, k = 3.0 x 10⁻4 / (0.10² x 0.10) = 0.30 L² mol⁻2 s⁻1.2
Total: 5 marks5

Answer: rate = k[A]²[B], k = 0.30 L² mol⁻2 s⁻1

Fast method: Compare ratios by eye: a rate ratio of 4 for a doubled concentration means the square.

Sanity check: Using run 3: 0.30 x (0.20)² x 0.20 = 2.4 x 10⁻3, matching the data.

Example 4 (medium)

The overall equation 2A + B giving C is found experimentally to obey rate = k[A], and the rate is 5.0 x 10⁻4 mol L⁻1 s⁻1 when [A] = 0.20 and [B] = 0.50 mol L⁻1. Find the rate when [A] = 0.40 and [B] is tripled to 1.50 mol L⁻1.

Marks-style solution of example 4
StepMarks
The rate law is experimental, so it is first order in A and zero order in B, not the order 2 + 1 from the coefficients.1
k = 5.0 x 10⁻4 / 0.20 = 2.5 x 10⁻3 s⁻1.2
New rate = k[A] = 2.5 x 10⁻3 x 0.40 = 1.0 x 10⁻3 mol L⁻1 s⁻1; [B] has no effect.2
Total: 5 marks5

Answer: 1.0 x 10⁻3 mol L⁻1 s⁻1

Fast method: Only [A] matters and it doubles, so the rate doubles: 5.0 x 10⁻4 x 2.

Sanity check: Rate doubled when only [A] doubled, so first order is consistent; k in s⁻1 matches first order.

Typical trap: Writing the rate law from the coefficients, rate = k[A]²[B]. That would give a rate 2² x 3 = 12 times 5.0 x 10⁻4 = 6.0 x 10⁻3 (wrong). The order is a measured quantity unless the step is elementary.

Example 5 (hard, multi-step)

The elementary reaction 2A + B giving products has a rate of 1.44 x 10⁻3 mol L⁻1 s⁻1 at [A] = 0.20 and [B] = 0.30 mol L⁻1. (a) Find k with its unit. (b) The mixture is expanded at constant temperature to twice its volume (the amounts unchanged). Find the new rate.

Marks-style solution of example 5
StepMarks
Elementary, so rate = k[A]²[B], molecularity and order 3.1
(a) k = 1.44 x 10⁻3 / (0.20² x 0.30) = 0.12 L² mol⁻2 s⁻1.2
(b) Doubling the volume halves every concentration: [A] = 0.10, [B] = 0.15.1
New rate = 0.12 x (0.10)² x 0.15 = 1.8 x 10⁻4 mol L⁻1 s⁻1 (one-eighth of the old rate).2
Total: 6 marks6

Answer: k = 0.12 L² mol⁻2 s⁻1; new rate = 1.8 x 10⁻4 mol L⁻1 s⁻1

Fast method: Third order and concentrations halved: rate / 2³ = 1.44 x 10⁻3 / 8.

Sanity check: Expansion lowers concentrations, so the rate must fall: 1.8 x 10⁻4 is smaller than 1.44 x 10⁻3.

Example 6 (hard)

In two runs at constant temperature, [A] is raised from 0.040 to 0.160 mol L⁻1 while the rate goes from 1.0 x 10⁻3 to 8.0 x 10⁻3 mol L⁻1 s⁻1 (no other concentration changes). Find the order in A and the unit of k.

Marks-style solution of example 6
StepMarks
[A] increases by 4 and the rate by 8, so 4ᵐ = 8.1
m = ln 8 / ln 4 = 3/2 = 1.5.2
Unit of k = (mol L⁻1)^(1 - 1.5) s⁻1 = mol⁻0.5 L⁰.5 s⁻1.2
Total: 5 marks5

Answer: order 1.5; unit of k is mol⁻0.5 L⁰.5 s⁻1

Fast method: Write both as powers of 2: 4 = 2² and 8 = 2³, so m = 3/2.

Sanity check: Order between 1 (rate x 4) and 2 (rate x 16) for a 4-fold change in [A]; the observed factor 8 lies between 4 and 16.

Formulas and units

Formula and unit box for Rate of reaction, rate law and order
ResultFormulaValid whenUnits or noteWorked example
Rate of reactionrate = -(1/a) d[A]/dt = (1/c) d[C]/dt (for aA giving cC)constant volume; a, c are balanced-equation coefficientsmol L⁻1 s⁻1Example 1
Rate lawrate = k[A]ᵐ[B]ⁿexponents m, n found by experiment at fixed temperaturemol L⁻1 s⁻1Example 2
Overall orderorder = m + n (experimental; may be 0 or a fraction)m, n from experiment; equals molecularity only for elementary stepsdimensionlessExample 2
Unit of k(mol L⁻1)^(1 - n) s⁻1order n for a single reactant; concentrations in mol L⁻1zero: mol L⁻1 s⁻1; first: s⁻1; second: L mol⁻1 s⁻1; third: L² mol⁻2 s⁻1Example 2
Order from two runsorder in A = ln(rate2 / rate1) / ln([A]2 / [A]1)only [A] changes between the runs, temperature fixeddimensionlessExample 3
Volume change for gasesrate(new) = rate(old) x fⁿ when volume is divided by f, order ngases, constant T; all concentrations scale by f, overall order nmol L⁻1 s⁻1Example 5
Molecularitynumber of species colliding in an elementary step: 1, 2 or rarely 3not applicabledimensionlessnone
Gas pressure unitsk has units atm^(1 - n) s⁻1 when pressures replace concentrationsrate measured in atm s⁻1, pressures used as concentrationsatm^(1 - n) s⁻1none

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Taking the coefficients in the balanced equation as the orders. Why it tempts: In school the rate law of simple equations is often written from the equation, and elementary reactions really do obey it, so the habit carries over to complex reactions.
  • Confusing rate of disappearance of a reactant with the rate of reaction, and forgetting to divide by the coefficient. Why it tempts: The question quotes one species rate, and the same number is copied across as the rate of every species.
  • Writing a wrong unit of k (for example s⁻1 for a second-order reaction). Why it tempts: Most worked examples are first order, so s⁻1 is remembered as the unit of k in general.
  • Calling molecularity fractional or zero, or saying the order of a complex reaction equals its molecularity. Why it tempts: The words order and molecularity are used together in the same chapter, and both are numbers attached to a reaction.
  • In an initial-rate table, comparing two runs in which two concentrations changed and attributing all the change to one. Why it tempts: The change in the rate is obvious while the change in the second concentration is easy to miss in a table.
  • Believing k changes with the concentration of the reactant. Why it tempts: The rate falls as the reaction proceeds, and it is easy to take that fall as a fall in k.

Time per question and fast method

Target: about 90 seconds per question.

For a rate table, pair two runs in which one concentration changes and read the order from the power of 2 or 3. For stoichiometric rates, divide by coefficients. For units, write (mol L⁻1)^(1 - n) s⁻1 and simplify. For a volume change on an elementary gas reaction, multiply the rate by fⁿ.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. In 4NH3 + 5O2 giving 4NO + 6H2O, NH3 disappears at 0.20 mol L⁻1 s⁻1. Water forms at (mol L⁻1 s⁻1)
Show the answer

Answer: C: 0.30. Rate of reaction = 0.20/4 = 0.050; water = 6 x 0.050 = 0.30 mol L⁻1 s⁻1.

Question 2. A rate constant is given as 3.0 x 10⁻3 L mol⁻1 s⁻1. The reaction is of
Show the answer

Answer: C: second order. Unit (mol L⁻1)^(1 - n) s⁻1 with n = 2 gives L mol⁻1 s⁻1.

Question 3. When [A] is increased four times the rate doubles, other concentrations constant. The order in A is
Show the answer

Answer: A: 0.5. 4ᵐ = 2 gives m = 1/2.

Question 4. Which cannot be the molecularity of a reaction?
Show the answer

Answer: A: 0. Molecularity counts colliding species in an elementary step, so zero is meaningless (and fractions are impossible).

Question 5. For rate = k[A]², [A] is raised from 0.20 to 0.60 mol L⁻1. The rate becomes how many times larger?
Show the answer

Answer: C: 9. Rate scales as (0.60/0.20)² = 9.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Average and instantaneous rate, stoichiometry

The average rate of a reaction over a time interval is the change in concentration divided by the time. The instantaneous rate at time t is the slope of the tangent to the concentration-time curve at t, and the initial rate is its value at t = 0. For aA + bB giving cC + dD, the rate of reaction is unique: -(1/a) d[A]/dt = -(1/b) d[B]/dt = (1/c) d[C]/dt = (1/d) d[D]/dt. The rate of disappearance of one species and the rate of formation of another differ by the ratio of their coefficients, so always divide by the coefficient before comparing. For gases the rate may be given as change of partial pressure per second (atm s⁻1 or mm Hg min⁻1), and then the unit of k changes with it.

Factors affecting the rate: concentration, temperature, pressure, catalyst

Concentration: the rate usually increases with the concentration of reactants, as the rate law states. Pressure: for gases, compressing the mixture at constant temperature raises concentrations in proportion to the pressure, so the rate rises according to the order; for liquids and solids pressure has almost no effect. Temperature: the rate constant increases rapidly with temperature (Arrhenius equation, third lesson); for many reactions near room temperature k rises by a factor of about two to three for a 10 K rise, a rule of thumb and not a law. Catalyst: provides an alternative path of lower activation energy, speeds up forward and backward reactions equally, and does not alter the enthalpy change or the equilibrium constant. A catalyst is not consumed overall.

Elementary and complex reactions, molecularity

An elementary reaction takes place in a single step, with the molecules colliding as written. Its molecularity is the number of reacting species colliding in that step: unimolecular (1), bimolecular (2) and, very rarely, termolecular (3). Molecularity is a theoretical count, so it is always a whole number and is meaningless for an overall complex reaction. A complex reaction proceeds through two or more elementary steps with intermediates. The slowest step is the rate-determining step, and when it is the first step the rate law of the whole reaction is the rate law of that step. Chemical equations such as 2NO + O2 giving 2NO2 or 2N2O5 giving 4NO2 + O2 show only the overall change and tell nothing certain about the order.

Rate law, order and the rate constant

The rate law, rate = k[A]ᵐ[B]ⁿ, is an experimental result. m is the order in A, n is the order in B and m + n is the overall order. Orders may be zero, positive whole numbers or fractions; molecularity may not. For an elementary step only, the exponents equal the coefficients of the reacting species. The rate constant k is the rate at unit concentrations, characteristic of a reaction at a given temperature, and independent of concentration. Its unit is (mol L⁻1)^(1-n) s⁻1 for overall order n; for gases in pressure units it is atm^(1-n) s⁻1. A reaction with different orders in different reactants, such as first order in A and zero order in B, is common, and a species may appear in the equation and not in the rate law.

Initial-rate method, edge cases and what examiners test

Take two experiments in which one concentration changes. The ratio of rates equals the ratio of that concentration raised to its order, so order = ln(rate ratio) / ln(concentration ratio). Examiners test: order from a three- or four-run table (often with two concentrations changing in one run), the new rate for new concentrations, units of k from the order or the reverse, conversion of units of k (litres to cm³, seconds to minutes), the effect of changing volume on the rate of an elementary gas reaction (rate multiplies by fⁿ when volume divides by f), rate of formation against rate of disappearance, and the statement that molecularity and order are different. Pseudo-first-order behaviour is not named in the syllabus line and is not needed here.

Memory hook

Suppose you run a tea stall at a bus stand and count how many cups you sell each minute.

  1. If twice as many people are waiting, you sell twice as many cups a minute: sales depend on the queue to the first power, like a reaction first order in one reactant.
  2. If each sale needs one waiting customer and one cup of tea already poured, doubling both the queue and the poured cups makes four times as many sales: the orders add, like rate = k[A][B] of overall order 2.
  3. How quickly you hand over tea and take money is a fixed habit that does not depend on the queue length: that is k. A faster helper (higher temperature, a catalyst) raises k without changing the queue.

Rate depends on how many reactant particles are present, through exponents found by watching, not by the menu (the equation); k is the speed of the stall itself.

Order is found by experiment, never by coefficients; k belongs to the stall, not to the queue.

Revision card

Try to answer each without looking above.

  1. Write the rate of reaction for aA + bB giving cC + dD in terms of each species.
  2. Why is the rate law not read from the balanced equation, and when can it be?
  3. State the unit of k for zero, first, second and third order.
  4. How is the order in one reactant found from two initial-rate runs?
  5. Give two differences between order and molecularity.
  6. By what factor does the rate of an elementary 2A + B reaction change if the volume is halved?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 1; fixed: 1
  • Report: content/reviews/learn2-kin2-2026-11-20.md

Textbook references

  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 3: Chemical Kinetics, 3.2.2 Rate Expression and Rate Constant (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 3: Chemical Kinetics, 3.2.3 Order of a Reaction (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 3: Chemical Kinetics, 3.2.4 Molecularity of a Reaction (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 3: Chemical Kinetics, 3.1 Rate of a Chemical Reaction (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 3: Chemical Kinetics, 3.2 Factors Influencing Rate of a Reaction (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 8, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
  • NCERT Class 12 Chemistry, Chemical Kinetics chapter: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.