EngineeringRise

Water flows through a horizontal Venturi meter whose wide and narrow sections have cross-sectional areas 40 cm² and 10 cm². A mercury U-tube connected between the two sections shows a level difference of 5.0 cm. Take mercury density 13600 kg/m³, water density 1000 kg/m³ and g = 10 m/s². The volume flow rate, in litre per second, is

Answer: (A) 3.67 litre/s Status: Verified (T1). Checked by code and independent solves on 2026-11-20.

  1. 3.67 litre/s
  2. 1.83 litre/s
  3. 7.33 litre/s
  4. 14.7 litre/s

Solution

  1. The manometer reads the pressure difference between the sections: dP = (13600 - 1000) x 10 x 0.050 = 6300 Pa (water fills the limbs above the mercury).
  2. Continuity: v2 = 4 v1 (area ratio 4). Bernoulli: dP = (1/2) rho (v2² - v1²) = (1/2) x 1000 x 15 v1², so v1² = 2 x 6300/(15000) = 0.84 and v1 = 0.917 m/s.
  3. Q = A1 v1 = 40 x 10⁻4 x 0.917 = 3.67 x 10⁻3 m³/s = 3.67 litre/s.

Fast method

dP = 6300 Pa; 7500 v1² = 6300 gives v1 = 0.917 m/s; Q = 40 x 10⁻4 x 0.917 = 3.67 litre/s. Using 13600 x g x h as the pressure difference (ignoring the water in the limbs) gives 3.81 litre/s, close but wrong by about 4 percent.

Expected time: about 180 seconds. Difficulty: hard.

Topic page: Fluid pressure, Pascal law, viscosity and Bernoulli principle

Test your answers now

Report an error

Think the question, answer or a step is wrong? One tap tells us. We check it and publish the correction.