A screw gauge has a pitch of 0.5 mm and 50 divisions on the circular scale. With the studs touching, the 46th division of the circular scale is in line with the reference line (closed reading 46), so the zero of the circular scale has not yet reached the reference line. A wire is placed between the studs: the main scale shows 1.5 mm and the 28th circular division is in line with the reference line. The diameter of the wire, in mm, is
Answer: (D) 1.82 mm Status: Verified (T1). Checked by code and independent solves on 2026-11-20.
- 1.74 mm
- 1.78 mm
- 2.90 mm
- 1.82 mm
Solution
- Least count = 0.5 mm/50 = 0.01 mm.
- Closed reading 46 means the zero is 4 divisions short of the line: zero error = -0.04 mm.
- Observed = 1.5 + 28 x 0.01 = 1.78 mm; corrected = 1.78 - (-0.04) = 1.82 mm.
Fast method
Least count 0.01 mm. Negative zero error of 0.04 mm means add 0.04 mm to the observed 1.78 mm: 1.82 mm. Using 0.05 mm as the least count gives the tempting 2.90 mm.
Expected time: about 80 seconds. Difficulty: easy.
Topic page: Measuring instruments: vernier calipers, screw gauge, metre scale and pendulum