EngineeringRise

A Zener diode of breakdown voltage 6.0 V is used as a regulator. A 12 V supply feeds it through a series resistor of 200 ohm, and a load of 600 ohm is connected across the Zener diode. The current through the Zener diode, in mA, is

Answer: (C) 20 mA Status: Verified (T1). Checked by code and independent solves on 2026-11-20.

  1. 10 mA
  2. 30 mA
  3. 20 mA
  4. 40 mA

Solution

  1. The Zener diode holds the output at 6.0 V, so the series resistor carries (12 - 6.0)/200 = 30 mA.
  2. The load takes 6.0/600 = 10 mA.
  3. Zener current = 30 - 10 = 20 mA.

Fast method

Series-resistor current 30 mA minus load current 10 mA = 20 mA. If the load is removed, all 30 mA goes through the Zener diode.

Expected time: about 75 seconds. Difficulty: medium.

Topic page: LED, photodiode, solar cell and Zener diode

Test your answers now

Report an error

Think the question, answer or a step is wrong? One tap tells us. We check it and publish the correction.