EngineeringRise

The 220 V rms mains is stepped down by an ideal 10 : 1 transformer. The secondary feeds a half-wave rectifier made of one ideal diode and a load resistor. A moving-coil dc voltmeter across the load reads the average value. Its reading, in volt, is nearly

Answer: (B) 9.9 V Status: Verified (T1). Checked by code and independent solves on 2026-11-20.

  1. 19.8 V
  2. 9.9 V
  3. 15.6 V
  4. 31.1 V

Solution

  1. Secondary rms voltage = 220/10 = 22 V, so the peak is 22 x 1.414 = 31.1 V.
  2. For a half-wave rectifier the average output over a full cycle is V_peak/pi.
  3. V_dc = 31.1/3.142 = 9.9 V.

Fast method

V_dc = 0.318 x V_peak = 0.318 x 31.1 = 9.9 V. The other values are 2 V_peak/pi (full wave, 19.8 V), V_peak/2 (the half-wave rms, 15.6 V) and V_peak (31.1 V).

Expected time: about 90 seconds. Difficulty: medium.

Topic page: Semiconductors, p-n junction diode and rectifier

Test your answers now

Report an error

Think the question, answer or a step is wrong? One tap tells us. We check it and publish the correction.