EngineeringRise

Electromagnetic Spectrum and Uses: JEE Main Notes

Reviewed Last updated 2026-11-21. Syllabus topic: Electromagnetic spectrum and applications.

In short. The electromagnetic spectrum runs from radio waves to gamma rays in order of increasing frequency. All of them travel at c = 3.0 x 10⁸ m/s in vacuum, so c = f lambda, and each region has its own typical source and application.

  • Order of increasing frequency: radio, microwave, infrared, visible, ultraviolet, X-ray, gamma; wavelength falls in the same order.
  • All regions travel at c in vacuum; only frequency and wavelength differ, with c = f lambda.
  • Radio: communication; microwave: radar, ovens and satellite links; infrared: heating, remote controls, thermal imaging.
  • Visible light: vision; ultraviolet: sterilising and fluorescence, absorbed by ozone; X-rays: imaging and crystal studies; gamma rays: radiotherapy and sterilising.
  • Band edges are approximate and neighbouring regions overlap; compare by order, not by a memorised boundary.

Syllabus line: Electromagnetic Waves Displacement current, electromagnetic waves and their characteristics, transverse nature of electromagnetic waves, electromagnetic spectrum (radio waves, microwaves, infrared, visible, ultraviolet, X-rays, Gamma rays), applications of electromagnetic waves. (NTA JEE (Main) 2026 syllabus, Physics, Unit 15 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Displacement current and electromagnetic waves: The spectrum is one family of waves with the same structure. Read this first if c = f lambda or the transverse nature is unclear.
  • Oscillations and waves: wave speed, frequency, wavelength (lesson planned): Standing waves and v = f lambda are used in the examples.
  • Units and dimensions (lesson planned): Prefixes (kilo, mega, giga, nano) cause most of the lost marks here.

Related topics

The concept step by step

  1. One family of waves

    Radio waves, light and X-rays are all electromagnetic waves. They are the same kind of disturbance, a changing electric and magnetic field, and differ only in frequency and therefore wavelength. In vacuum every one of them travels at c = 3.0 x 10⁸ m/s. So c = f lambda: the higher the frequency, the shorter the wavelength. The spectrum is the arrangement of the waves by frequency or wavelength.

  2. The seven regions in order

    In order of increasing frequency (decreasing wavelength) the regions are: radio waves, microwaves, infrared, visible light, ultraviolet, X-rays and gamma rays. Radio waves have wavelengths from kilometres to fractions of a metre, microwaves from decimetres to millimetres, infrared from about a millimetre to visible red, visible light is roughly 400 nm to 700 nm, and the ultraviolet, X-ray and gamma ray regions lie at ever shorter wavelengths. The boundaries are approximate and neighbouring regions overlap, so questions compare regions by order.

  3. Sources and detection

    Radio waves come from charges accelerating in conductors, as in aerials and oscillating circuits. Microwaves are produced by special electronic devices and used with waveguides. Infrared is emitted by hot bodies and by molecules vibrating. Visible and ultraviolet light come from transitions of atomic electrons and from very hot bodies. X-rays are produced when fast electrons are stopped by a metal target or by inner-shell transitions. Gamma rays come from nuclear transitions and decay. Detection follows the same pattern: aerials for radio, thermopiles and special photographic films for infrared, the eye and photocells for visible light.

  4. Applications by region

    Radio waves carry broadcasts and mobile signals. Microwaves are used in radar, in satellite links and in ovens, where water molecules absorb the waves. Infrared is used for heating, thermal imaging, remote controls and in the greenhouse effect. Visible light gives vision and is used in optical communication. Ultraviolet is used for sterilising and for detecting fluorescence, and ozone in the atmosphere absorbs the harmful part. X-rays are used in medical imaging and in studying crystals. Gamma rays are used in radiotherapy and for sterilising equipment.

  5. Working with wavelength and frequency

    Convert prefixes first: 1 MHz = 10⁶ Hz, 1 GHz = 10⁹ Hz, 1 nm = 10⁻9 m, 1 cm = 10⁻2 m. Then use lambda = c/f. A quick rule is lambda (metre) = 300/f (MHz). For radar the echo time covers a round trip, so the distance is c t/2. For a standing wave adjacent nodes are lambda/2 apart. Keep the speed as c in air and vacuum to the accuracy of the examination.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

A source emits light of frequency 5.0 x 10¹4 Hz. Find its wavelength in nanometre. Take c = 3.0 x 10⁸ m/s.

Marks-style solution of example 1
StepMarks
lambda = c/f.1
lambda = 3.0 x 10⁸ / 5.0 x 10¹4 = 6.0 x 10⁻7 m.1
lambda = 600 nm.1
Total: 3 marks3

Answer: 600 nm

Fast method: 3/5 = 0.6, and 10⁸/10¹4 = 10⁻6 m, so 0.6 micrometre.

Sanity check: Units: (m/s)/(1/s) = m. 600 nm lies in the visible range (about 400 nm to 700 nm), so the answer is consistent with the frequency.

Example 2 (easy)

An X-ray has wavelength 0.10 nm. Find its frequency in units of 10¹8 Hz. Take c = 3.0 x 10⁸ m/s.

Marks-style solution of example 2
StepMarks
f = c/lambda.1
lambda = 0.10 nm = 1.0 x 10⁻10 m.1
f = 3.0 x 10⁸ / 1.0 x 10⁻10 = 3.0 x 10¹8 Hz.1
Total: 3 marks3

Answer: 3.0 x 10¹8 Hz

Fast method: Divide 3 x 10⁸ by 10⁻10: the exponent becomes 18.

Sanity check: Units: (m/s)/m = 1/s. The frequency is far above the visible value of about 5 x 10¹4 Hz, as expected for X-rays.

Example 3 (medium)

A radar pulse takes 80 microsecond to return from a target. Find the distance of the target in kilometre. Take c = 3.0 x 10⁸ m/s.

Marks-style solution of example 3
StepMarks
The pulse travels to the target and back, so 2 d = c t.1
d = 3.0 x 10⁸ x 80 x 10⁻6 / 2 = 1.2 x 10⁴ m.1
d = 12 km.1
Total: 3 marks3

Answer: 12 km

Fast method: c t = 3 x 10⁸ x 8 x 10⁻5 = 24000 m; half of it is 12000 m.

Sanity check: Units: (m/s) x s = m. Each microsecond of echo delay corresponds to 150 m of one-way distance, so 80 microsecond gives 80 x 150 m = 12 km.

Example 4 (medium)

An amplitude-modulated radio station broadcasts at 600 kHz. Find the wavelength in metre. Take c = 3.0 x 10⁸ m/s.

Marks-style solution of example 4
StepMarks
lambda = c/f.1
f = 600 kHz = 6.0 x 10⁵ Hz.1
lambda = 3.0 x 10⁸ / 6.0 x 10⁵ = 500 m.1
Total: 3 marks3

Answer: 500 m

Fast method: 300 divided by the frequency in MHz: 300/0.6 = 500 m.

Sanity check: Units: m. Wavelengths of hundreds of metres are in the radio range (longer than about 0.1 m), so the answer sits in the right region.

Example 5 (hard, multi-step)

A ground station sends a radio signal to a satellite 3.6 x 10⁷ m above it. The satellite takes 5.0 ms to process and reply, and the reply returns straight to the station. Find the total time between sending and receiving in millisecond. Take c = 3.0 x 10⁸ m/s.

Marks-style solution of example 5
StepMarks
Each leg takes d/c = 3.6 x 10⁷ / 3.0 x 10⁸ = 0.12 s = 120 ms.2
There are two legs: up and down. Propagation time = 240 ms.1
Add the processing delay: 240 + 5.0 = 245 ms.1
Total time = 245 ms.1
Total: 5 marks5

Answer: 245 ms

Fast method: d/c = 0.12 s each way, so 0.24 s plus 0.005 s.

Sanity check: Units: m/(m/s) = s. A quarter of a second is a noticeable lag in a conversation, which is what the round trip to a high satellite gives.

Typical trap: Counting one leg only: 120 + 5 = 125 ms. The signal goes up and the reply comes down, so two legs are needed.

Example 6 (hard, multi-step)

An X-ray of wavelength 0.050 nm and a microwave of wavelength 3.0 cm are compared. Find the ratio of the frequency of the X-ray to that of the microwave in units of 10⁸.

Marks-style solution of example 6
StepMarks
Frequency is inversely proportional to wavelength in vacuum, since f = c/lambda.1
Ratio f_X/f_m = lambda_m/lambda_X.1
lambda_m = 3.0 x 10⁻2 m and lambda_X = 5.0 x 10⁻11 m.1
Ratio = 3.0 x 10⁻2 / 5.0 x 10⁻11 = 6.0 x 10⁸, so the answer is 6.0.1
Total: 4 marks4

Answer: 6.0 x 10⁸

Fast method: Convert both to metre first: 3 x 10⁻2 over 5 x 10⁻11 is 0.6 x 10⁹.

Sanity check: The ratio is dimensionless. X-rays are far higher in frequency than microwaves, so a ratio of many orders of magnitude is expected; a ratio below 1 would signal an inverted fraction.

Typical trap: Writing the ratio upside down, 1.7 x 10⁻9, because wavelength is quoted in the problem and frequency is asked.

Example 7 (medium)

Two FM stations transmit at 90 MHz and 100 MHz. Find the difference in their wavelengths in metre. Take c = 3.0 x 10⁸ m/s.

Marks-style solution of example 7
StepMarks
lambda = c/f for each station.1
lambda₉0 = 3.0 x 10⁸ / 9.0 x 10⁷ = 3.333 m and lambda₁00 = 3.000 m.1
Difference = 0.333 m.1
Total: 3 marks3

Answer: 0.33 m

Fast method: 300/90 - 300/100 = 3.333 - 3 = 0.333 m.

Sanity check: Units: m. The stations differ by about 11 percent in frequency, so the wavelengths should differ by about 11 percent of 3 m, which is 0.33 m.

Formulas and units

Formula and unit box for Electromagnetic spectrum and applications
ResultFormulaValid whenUnits or noteWorked example
Wave relationc = f lambda; lambda (m) = 300/f (MHz)vacuum or air; the 300/f shortcut needs f in MHzm/s (m, Hz)Example 1
Order of increasing frequencyradio < microwave < infrared < visible < ultraviolet < X-ray < gammanot applicablenonenone
Visible rangeabout 400 nm to 700 nm (approximate)not applicablenmnone
Radar distanced = c t/2pulse reflects back to the same point, travelling at cmExample 3
Standing-wave node spacingadjacent nodes lambda/2 apartstanding wave from two equal waves travelling oppositelymnone
Prefixesk = 10³, M = 10⁶, G = 10⁹, nm = 10⁻9 mnot applicablenonenone
Speed in vacuumsame value c = 3.0 x 10⁸ m/s for every regionvacuum (free space)m/snone
Ratio of frequenciesf1/f2 = lambda2/lambda1 (same medium)same medium (or vacuum), so the speed is the samenoneExample 6

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Using the echo time as the one-way time in radar problems. Why it tempts: The time is quoted as 'the time taken', and c t looks complete; but the pulse goes out and returns, so the distance is c t/2.
  • Confusing the order of ultraviolet and infrared. Why it tempts: Both end in '-violet' or '-red' and the names suggest the neighbours of visible light; infrared is below red (lower frequency) and ultraviolet is above violet.
  • Thinking X-rays travel faster than radio waves because they are more energetic. Why it tempts: Higher energy sounds like higher speed, but in vacuum all electromagnetic waves travel at c.
  • Not converting MHz, GHz or nm before using c = f lambda. Why it tempts: The numbers look small and the formula looks simple, so a factor 10³ or 10⁶ slips in, and options are often spaced by such factors.
  • Using a memorised boundary as if it were exact. Why it tempts: Tables give clean band edges, but the regions overlap and the edges vary slightly between books; use order, not a boundary.

Time per question and fast method

Target: about 60 seconds per question.

Write the seven regions in order first, then answer comparison questions from the list. For wavelength use lambda (m) = 300/f (MHz); convert prefixes before dividing. For radar divide c t by 2.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. Which of these electromagnetic waves has the greatest frequency?
Show the answer

Answer: C: X-rays. Among these, X-rays have the shortest wavelength and therefore the highest frequency. The order of increasing frequency is microwave, infrared, visible, ultraviolet, X-ray, gamma.

Question 2. A wave of frequency 1.5 x 10¹5 Hz in vacuum has wavelength, in nanometre,
Show the answer

Answer: C: 200. lambda = c/f = 3.0 x 10⁸ / 1.5 x 10¹5 = 2.0 x 10⁻7 m = 200 nm.

Question 3. A radio signal travels to a satellite and back in 0.24 s. The satellite distance, in 10⁷ m, is
Show the answer

Answer: B: 3.6. d = c t/2 = 3.0 x 10⁸ x 0.24/2 = 3.6 x 10⁷ m.

Question 4. Which radiation is used to see inside the human body to locate a bone fracture?
Show the answer

Answer: C: X-rays. X-rays penetrate soft tissue but are absorbed more by bone, so they form a shadow image.

Question 5. The speed of X-rays in vacuum compared with that of radio waves is
Show the answer

Answer: C: The same. All electromagnetic waves travel with the same speed c in vacuum, whatever the frequency.

Question 6. The wavelength of a microwave is 12 cm. Its frequency, in GHz, is
Show the answer

Answer: B: 2.5. f = c/lambda = 3.0 x 10⁸ / 0.12 = 2.5 x 10⁹ Hz = 2.5 GHz.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Order, properties and what stays constant

Frequency increases from radio to gamma and wavelength decreases. Photon energy also increases with frequency, so gamma rays and X-rays are the most penetrating and the most hazardous to tissue; ultraviolet can damage skin, while radio waves and microwaves carry little energy per photon. The speed in vacuum is c for all regions. All of them are transverse, are not deflected by electric or magnetic fields, and obey reflection, refraction and interference, though the effects are noticeable only when the size of the object is comparable with the wavelength. In a medium the speed is less than c and depends on frequency.

Radio and microwaves

Radio waves are used for broadcasting, with long wavelengths in the AM range (hundreds of metres) and shorter ones of a few metres for FM and television. Microwaves have wavelengths of millimetres to decimetres and are used for radar, satellite links and mobile networks because they pass through the atmosphere and can be focused by small dishes. In a microwave oven the frequency is about 2.45 GHz; standing waves form in the cavity, with nodes lambda/2 apart, and the turntable moves the food through the hot and cold spots. Radar measures distance from the round-trip time of a pulse: d = c t/2.

Infrared, visible and ultraviolet

Infrared radiation is emitted by all warm bodies and is absorbed by many materials as heat, so it is called heat radiation. It is used for remote controls, night vision and thermal imaging, and carbon dioxide and water vapour in the atmosphere absorb it, which is the greenhouse effect. Visible light lies between about 400 nm (violet) and 700 nm (red). Ultraviolet has shorter wavelengths, causes fluorescence and tanning, kills germs and is used for sterilising water; the ozone layer absorbs the harmful part of the solar ultraviolet. Ordinary glass absorbs much of the ultraviolet.

X-rays, gamma rays and what examiners test

X-rays have wavelengths of a fraction of a nanometre. They pass through soft tissue and are absorbed by bone, which is the basis of radiography, and they are used for studying crystal structure and in baggage scanners. Gamma rays are emitted by nuclei and are even more energetic; they are used for treating cancer and sterilising food and equipment. Examiners test: the order of the regions, matching a region with its use or source, finding wavelength from frequency with prefixes, radar timing, and statements such as 'X-rays have the same speed as light in vacuum'. Learn the order cold and always convert units before dividing.

Memory hook

Suppose a family listens to an AM radio station, heats a plate in a microwave oven, switches the television on with a remote, and later goes to a clinic for an X-ray of a sprained wrist.

  1. The radio, oven, remote and X-ray machine all work through waves of the same kind: electric and magnetic fields travelling at the same speed in air.
  2. What changes from one to the next is the frequency: a few hundred kilohertz for the radio, about 2.45 GHz for the oven, a much higher infrared frequency for the remote, and a far higher one for the X-ray.
  3. Since the speed is fixed, the higher the frequency, the shorter the wavelength: hundreds of metres for the radio, about 12 cm for the oven, a fraction of a nanometre for the X-ray.

The spectrum is one wave family sorted by frequency, with c = f lambda linking each region to its wavelength.

Same speed, different frequency: radio, oven, remote, X-ray are one family on one ladder.

Revision card

Try to answer each without looking above.

  1. List the seven regions in order of increasing frequency.
  2. State the relation between wavelength, frequency and speed, and the shortcut for wavelength in metre.
  3. Give one source and one use for each of radio, microwave and infrared waves.
  4. Give one use each for ultraviolet, X-rays and gamma rays.
  5. How is the distance of a target found from a radar echo?
  6. What is the speed of every region of the spectrum in vacuum?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 0; fixed: 0
  • Report: content/reviews/learn8-emw-2026-11-21.md

Textbook references

  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 8: Electromagnetic Waves, 8.4.4 Visible rays (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 8: Electromagnetic Waves, Points to Ponder POINTS TO PONDER (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 8: Electromagnetic Waves, 8.4 ELECTROMAGNETIC SPECTRUM (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 8: Electromagnetic Waves, 8.4.1 Radio waves (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 8: Electromagnetic Waves, 8.4.6 X-rays (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 8: Electromagnetic Waves, 8.4.7 Gamma rays (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 8: Electromagnetic Waves, 8.4.2 Microwaves (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 8: Electromagnetic Waves, 8.4.5 Ultraviolet rays (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 8: Electromagnetic Waves, 8.4.3 Infrared waves (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 8: Electromagnetic Waves, Summary SUMMARY (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 15 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
  • NTA JEE (Main) 2026 syllabus, Physics, Unit 15 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
  • Standard results on the electromagnetic spectrum and its uses; band edges are approximate; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.