Displacement Current and EM Waves: JEE Main Notes
Reviewed Last updated 2026-11-21. Syllabus topic: Displacement current and electromagnetic waves.
In short. Displacement current I_d = epsilon₀ dPhi_E/dt completes Ampere's law, making a changing electric field a source of magnetic field. The result is a transverse wave of speed c = 1/sqrt(mu₀ epsilon₀), in which E0/B0 = c.
- Displacement current I_d = epsilon₀ dPhi_E/dt; between capacitor plates it equals the wire current I = C dV/dt.
- Ampere-Maxwell law: line integral of B.dl = mu₀ (I_conduction + I_d).
- E, B and the direction of travel are mutually perpendicular; E and B are in phase, and E x B points along the travel.
- In vacuum c = 1/sqrt(mu₀ epsilon₀) and E0/B0 = c; in a medium v = 1/sqrt(mu epsilon) and E0/B0 = v.
- Average energy density u = (1/2) epsilon₀ E0², shared equally by E and B; intensity I = u c = (1/2) epsilon₀ c E0².
Syllabus line: Electromagnetic Waves Displacement current, electromagnetic waves and their characteristics, transverse nature of electromagnetic waves, electromagnetic spectrum (radio waves, microwaves, infrared, visible, ultraviolet, X-rays, Gamma rays), applications of electromagnetic waves. (NTA JEE (Main) 2026 syllabus, Physics, Unit 15 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Electrostatics: capacitors and electric flux (lesson planned): Displacement current is built from electric flux and C = epsilon₀ A/d. Read this first if flux or capacitance is unclear.
- Magnetic effects of current: Ampere's law (lesson planned): The Maxwell correction modifies Ampere's law, so the field of a long wire must be familiar.
- Electromagnetic induction: Faraday's law (lesson planned): A changing magnetic field producing an electric field is the other half of the wave mechanism.
Related topics
- Electrostatics (lesson planned)
- Magnetic Effects of Current and Magnetism (lesson planned)
- Electromagnetic Induction and Alternating Currents (lesson planned)
- Electromagnetic spectrum and applications
- Optics (lesson planned)
The concept step by step
The gap in Ampere's law
Ampere's law says the line integral of B around a loop equals mu₀ times the current through any surface bounded by the loop. Take a loop around the wire feeding a charging capacitor. A flat surface cutting the wire has current I through it. A bulging surface passing between the plates has no conduction current through it, yet the loop and B are the same. The law as stated gives two different answers for one loop, so something is missing between the plates.
Displacement current as the missing term
Between the plates the electric flux Phi_E = E A = q/epsilon₀ grows as the plates charge. Its rate of change is dPhi_E/dt = I/epsilon₀, so epsilon₀ dPhi_E/dt equals the wire current I. Maxwell called this the displacement current, I_d = epsilon₀ dPhi_E/dt. The corrected law is: line integral of B.dl = mu₀ (I_c + I_d). Now every surface gives the same answer, and a changing electric field acts as a source of magnetic field, just as a conduction current does.
Fields feeding each other
Faraday's law says a changing B produces an electric field. The Maxwell term says a changing E produces a magnetic field. In empty space a changing E makes a B, which changes and makes an E, and the disturbance moves on without charges or wires. This self-sustaining disturbance is the electromagnetic wave. Solving the equations gives a wave speed 1/sqrt(mu₀ epsilon₀), which evaluates to about 3.0 x 10⁸ m/s, the measured speed of light.
Structure of a plane wave
For a plane wave travelling along x, with E = E0 sin(kx - omega t) along y, the magnetic field B = B0 sin(kx - omega t) is along z. The three directions E, B and travel are mutually perpendicular, so the wave is transverse, and E x B points along the direction of travel. E and B are in phase, rise and vanish together, and E0/B0 = c in vacuum. The wave speed is omega/k = f lambda. The wave carries energy but needs no medium.
Energy and intensity
The energy density of the electric part is (1/2) epsilon₀ E² and of the magnetic part B²/(2 mu₀), and these are equal at every instant because E = cB. Averaging sin² gives 1/2, so the average total energy density is u = (1/2) epsilon₀ E0² and the intensity (power per unit area) is I = u c = (1/2) epsilon₀ c E0² = c B0²/(2 mu₀). A point source of power P has intensity P/(4 pi r²) at distance r, so E0 falls as 1/r.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
The plates of a parallel-plate capacitor each have area 0.030 m². The electric field between them rises at 2.0 x 10¹1 V/m per second. Take epsilon₀ = 8.85 x 10⁻12 F/m. Find the displacement current between the plates in milliampere.
| Step | Marks |
|---|---|
| Displacement current I_d = epsilon₀ dPhi_E/dt, and Phi_E = E A for a uniform field. | 1 |
| I_d = 8.85 x 10⁻12 x 0.030 x 2.0 x 10¹1 = 0.0531 A. | 1 |
| I_d = 53.1 mA. | 1 |
| Total: 3 marks | 3 |
Answer: 53.1 mA
Fast method: epsilon₀ x A x (dE/dt) = 8.85 x 10⁻12 x 0.03 x 2 x 10¹1; 8.85 x 0.03 x 2 x 10⁻1 = 0.0531 A.
Sanity check: Units: F/m x m² x V/(m s) = F V/s = C/s = A.
Example 2 (easy)
Using epsilon₀ = 8.85 x 10⁻12 F/m and mu₀ = 4 pi x 10⁻7 T m/A, find the speed 1/sqrt(mu₀ epsilon₀) in units of 10⁸ m/s.
| Step | Marks |
|---|---|
| Maxwell's equations give the wave speed v = 1/sqrt(mu₀ epsilon₀). | 1 |
| mu₀ epsilon₀ = 1.2566 x 10⁻6 x 8.85 x 10⁻12 = 1.112 x 10⁻17 s²/m². | 1 |
| v = 1/(3.335 x 10⁻9) = 2.999 x 10⁸ m/s, so about 3.0 in units of 10⁸ m/s. | 1 |
| Total: 3 marks | 3 |
Answer: about 3.0 x 10⁸ m/s
Fast method: Remember mu₀ epsilon₀ = 1/c², so the root of 1.11 x 10⁻17 is 3.33 x 10⁻9 and its reciprocal is 3 x 10⁸.
Sanity check: Units: (T m/A x F/m) = s²/m², so the reciprocal square root is m/s. The value equals the measured speed of light, which is the point of the result.
Example 3 (medium)
A plane wave in vacuum has peak electric field 90 V/m. Find its peak magnetic field in microtesla. Take c = 3.0 x 10⁸ m/s.
| Step | Marks |
|---|---|
| E0/B0 = c in vacuum. | 1 |
| B0 = 90/(3.0 x 10⁸) = 3.0 x 10⁻7 T. | 1 |
| B0 = 0.30 microtesla. | 1 |
| Total: 3 marks | 3 |
Answer: 0.30 microtesla
Fast method: Divide by 3 x 10⁸: 90/3 = 30, giving 30 x 10⁻8 T = 0.3 microtesla.
Sanity check: Units: (V/m)/(m/s) = V s/m² = T. Magnetic fields of electromagnetic waves are tiny compared with the field of a bar magnet, which is the usual order of magnitude.
Example 4 (medium)
The peak electric field of a plane wave in vacuum is 30 V/m. Find its average intensity in W/m². Take epsilon₀ = 8.85 x 10⁻12 F/m and c = 3.0 x 10⁸ m/s.
| Step | Marks |
|---|---|
| Average intensity I = (1/2) epsilon₀ c E0². | 1 |
| I = 0.5 x 8.85 x 10⁻12 x 3.0 x 10⁸ x 900. | 1 |
| I = 1.19 W/m². | 1 |
| Total: 3 marks | 3 |
Answer: 1.19 W/m²
Fast method: epsilon₀ c is about 2.66 x 10⁻3 S; half of it is 1.33 x 10⁻3; times 900 gives 1.19.
Sanity check: Units: F/m x m/s x V²/m² = (C/V)(V²) /(m² s) = J/(s m²) = W/m². Sunlight is of order 10³ W/m², so 1 W/m² for 30 V/m is plausible.
Example 5 (hard, multi-step)
Circular plates of radius 0.20 m are being charged by a 2.0 A wire current. Find the magnetic field, in microtesla, at 0.05 m from the axis between the plates. Take mu₀ = 4 pi x 10⁻7 T m/A.
| Step | Marks |
|---|---|
| The displacement current density is uniform over the plate, so the current through radius r is I (r/R)². | 2 |
| (0.05/0.20)² = 0.0625, so I_enclosed = 2.0 x 0.0625 = 0.125 A. | 1 |
| Ampere-Maxwell law: B (2 pi r) = mu₀ I_enclosed, so B = 2 x 10⁻7 x 0.125 / 0.05 = 5.0 x 10⁻7 T. | 1 |
| B = 0.50 microtesla. | 1 |
| Total: 5 marks | 5 |
Answer: 0.50 microtesla
Fast method: Inside the plates B = mu₀ I r/(2 pi R²) = 2 x 10⁻7 x 2 x 0.05 / 0.04 = 5 x 10⁻7 T.
Sanity check: Limiting case: at r = R the formula gives mu₀ I/(2 pi R) = 2 x 10⁻6 T, the same as the field of a long wire just outside, so the two regions join smoothly.
Example 6 (hard, multi-step)
A plane wave travels in a medium of relative permittivity 4 and relative permeability 1. The peak electric field is 30 V/m. Find the peak magnetic field in units of 10⁻7 T. Take c = 3.0 x 10⁸ m/s. (The speed in the medium is the first step.)
| Step | Marks |
|---|---|
| In a medium v = 1/sqrt(mu epsilon) = c/sqrt(mu_r epsilon_r). | 1 |
| v = 3.0 x 10⁸ / sqrt(4) = 1.5 x 10⁸ m/s. | 1 |
| The fields still obey E0/B0 = v. | 2 |
| B0 = 30/(1.5 x 10⁸) = 2.0 x 10⁻7 T. | 1 |
| Total: 5 marks | 5 |
Answer: speed 1.5 x 10⁸ m/s; B0 = 2.0 x 10⁻7 T
Fast method: v = c/2 = 1.5 x 10⁸, then 30/1.5 x 10⁸ = 20 x 10⁻8 = 2 x 10⁻7 T.
Sanity check: Limiting case: with relative permittivity 1 the formula returns c and B0 = 1.0 x 10⁻7 T, the vacuum value. A larger permittivity slows the wave and increases B0 for the same E0.
Example 7 (medium)
The electric field of a wave in vacuum is E = 36 sin(2.0 x 10⁷ x - omega t) V/m, with x in metre. Find the frequency in units of 10¹4 Hz. Take c = 3.0 x 10⁸ m/s.
| Step | Marks |
|---|---|
| Wave speed c = omega/k, so omega = c k. | 1 |
| omega = 3.0 x 10⁸ x 2.0 x 10⁷ = 6.0 x 10¹5 rad/s. | 1 |
| f = omega/(2 pi) = 9.55 x 10¹4 Hz, so the answer is 9.55. | 1 |
| Total: 3 marks | 3 |
Answer: 9.55 x 10¹4 Hz
Fast method: f = c k/(2 pi) = c/lambda; with k = 2 x 10⁷, lambda = 3.14 x 10⁻7 m and c/lambda = 9.55 x 10¹4.
Sanity check: Units: (m/s)(rad/m) = rad/s, then divide by 2 pi rad per cycle for Hz. The wavelength 314 nm is shorter than visible light, so a frequency near 10¹5 Hz is consistent.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Displacement current | I_d = epsilon₀ dPhi_E/dt = C dV/dt (capacitor) | changing electric flux, e.g. between charging capacitor plates | A | Example 1 |
| Ampere-Maxwell law | closed integral of B.dl = mu₀ (I_c + I_d) | any closed loop; I_c is conduction current, I_d displacement current | T m | Example 5 |
| Wave speed in vacuum | c = 1/sqrt(mu₀ epsilon₀) = f lambda = omega/k | vacuum (free space); f lambda = omega/k holds for any wave | m/s (c = 3.0 x 10⁸ m/s) | Example 2 |
| Fields ratio | E0/B0 = c (vacuum); E0/B0 = v (medium) | plane EM wave: E0/B0 = c in vacuum, v in a medium | V/m per T = m/s | Example 3 |
| Medium speed | v = 1/sqrt(mu epsilon) = c/sqrt(mu_r epsilon_r) | non-conducting medium with constant mu and epsilon | m/s | Example 6 |
| Average energy density | u = (1/2) epsilon₀ E0² = B0²/(2 mu₀); u_E = u_B | plane EM wave in vacuum, E0 and B0 are peak values | J/m³ | none |
| Intensity | I = u c = (1/2) epsilon₀ c E0² = c B0²/(2 mu₀) | plane EM wave in vacuum, E0 peak, time-averaged | W/m² | Example 4 |
| Point source | I = P/(4 pi r²) | isotropic point source, no absorption, r from source | W/m² | none |
| Field between circular plates | B = mu₀ I r/(2 pi R²) (r R) | circular plates, uniform charging current I, plate radius R | T | Example 5 |
Common mistakes and speed
- Using the whole wire current in B = mu₀ I/(2 pi r) for a point between the plates. Why it tempts: The same formula works outside the plates, so it feels general; inside the plates only the fraction (r/R)² of the displacement current is enclosed.
- Taking the average energy density as epsilon₀ E0² or as (1/4) epsilon₀ E0². Why it tempts: The peak total is epsilon₀ E0² and the electric part alone averages (1/4) epsilon₀ E0²; both look like standard expressions, and one option usually carries each.
- Using the root mean square field in place of the peak field in the intensity formula, or the reverse. Why it tempts: Problems quote 'the field' without saying which; the formula (1/2) epsilon₀ c E0² needs the peak, while epsilon₀ c E_rms² needs the root mean square value.
- Saying E and B are 90 degrees out of phase in the wave. Why it tempts: In an LC oscillator or in induction the electric and magnetic quantities are quarter-cycle apart, so the pattern is carried over; in a travelling plane wave they are in phase.
- Writing the direction of B so that E x B points opposite to the travel. Why it tempts: Taking B x E by habit reverses the sign; the order must be E then B.
Time per question and fast method
Target: about 90 seconds per question.
For E to B use B0 = E0/c at once. For intensity use I = (1/2) epsilon₀ c E0² or c B0²/(2 mu₀) with one line of arithmetic. For displacement current do not integrate: I_d = C dV/dt, and between circular plates scale by (r/R)² for points inside.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- The electric field of a plane electromagnetic wave in vacuum has a peak value of 60 V/m. Take the speed of… Verified (T1)
- A capacitor of capacitance 50 pF is being charged so that the potential difference across its plates rises at… Verified (T1)
- In a plane electromagnetic wave in vacuum the peak magnetic field is 4.0 x 10⁻8 T. Take the speed of light as… Verified (T3)
- A plane electromagnetic wave in vacuum has a peak electric field of 120 V/m. Take epsilon₀ = 8.85 x 10⁻12… Verified (T1)
- A plane electromagnetic wave travels in vacuum along the negative z direction. Its electric field points… Verified (T1)
- A parallel-plate capacitor with circular plates of radius 0.10 m is being charged by a steady current of 3.0… Verified (T1)
- The plates of a parallel-plate capacitor each have area 2.0 x 10⁻2 m² and are 1.0 mm apart in vacuum. Take… Verified (T3)
- A capacitor of 2.0 microfarad with circular plates is connected in series with a 5.0 kilohm resistor and a 10… Verified (T1)
- A small lamp radiates 100 W of electromagnetic energy uniformly in all directions. Treat it as a point source… Verified (T1)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Displacement current: definition, direction and size
I_d = epsilon₀ dPhi_E/dt, in ampere. It is not a flow of charge; it is a changing electric flux that produces a magnetic field exactly like a current. In a charging parallel-plate capacitor with plate area A, I_d = epsilon₀ A dE/dt for a vacuum gap, and this equals C dV/dt = I, the wire current, so the current is continuous around the circuit. For a sinusoidal supply V = V0 sin(omega t), I_d = C omega V0 cos(omega t), and its peak is C omega V0. With a dielectric, epsilon replaces epsilon₀, and I_d still equals C dV/dt = I.
Magnetic field from displacement current
For circular plates of radius R and current I, the displacement current density is uniform over the plate area, so through a coaxial circle of radius r R, the same as the field around the straight wire. The field is continuous at r = R. A common error is to use the full current for a point inside the plates, which overstates B by the factor (R/r)².
Wave characteristics and the E to B relation
The wave is transverse: E and B lie in the plane perpendicular to travel and are perpendicular to each other. E and B are in phase and E0/B0 = c in vacuum, or v in a medium with v = 1/sqrt(mu epsilon) = c/sqrt(mu_r epsilon_r). The frequency is fixed by the source and does not change on entering a medium, while the wavelength changes with the speed. Electromagnetic waves are not deflected by electric or magnetic fields because they carry no charge, and they can travel through vacuum. A wave function of the form f(kx - omega t) travels along +x, while f(kx + omega t) travels along -x.
Energy, intensity and what examiners test
Equal sharing of energy between E and B means u_E = u_B = (1/4) epsilon₀ E0² averaged, with total u = (1/2) epsilon₀ E0². Intensity I = (1/2) epsilon₀ c E0² = c B0²/(2 mu₀) is proportional to the square of the amplitude. Typical questions give E0 or B0 and ask for the other field, the intensity or the energy density; give a capacitor and a rate of charging and ask for I_d or for B between the plates; or give the form of the wave and ask for its direction, wavelength or frequency. Watch the peak versus root mean square values, the factor one half in the average, and the sign of the direction from the cross product.
Memory hook
Suppose a village hand pump sends water through a pipe into a sealed tank, and a glass gauge on the side shows the water level rising. No water crosses the sealed top of the tank.
- Water arrives through the pipe, so the level rises; the sealed top is never crossed by any water.
- A person who only watches the gauge can still tell how fast water is arriving, because the rise rate times the tank's cross-section equals the flow through the pipe.
- So the changing level accounts for the inflow even though nothing crosses the top.
Between capacitor plates no charge crosses the gap, yet the changing electric flux accounts for the wire current, so epsilon₀ dPhi_E/dt equals the current I in the wire.
A changing electric flux counts as current: the rising level accounts for the inflow although nothing crosses the gap.
Revision card
Try to answer each without looking above.
- Write the displacement current in terms of electric flux and in terms of C and V.
- State the Ampere-Maxwell law and say what each current term is.
- Give the relation between E0 and B0 in vacuum and in a medium.
- State the directions of E, B and travel in a plane wave and their phase relation.
- Write the average energy density and the intensity of a plane wave in terms of E0.
- For circular plates, how does B between the plates depend on r, and what happens at r = R?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 3; fixed: 3
- Report: content/reviews/learn8-emw-2026-11-21.md
Textbook references
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 8: Electromagnetic Waves, 8.2 DISPLACEMENT CURRENT (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 8: Electromagnetic Waves, 8.3.2 Nature of electromagnetic waves (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 8: Electromagnetic Waves, 8.1 INTRODUCTION (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 8: Electromagnetic Waves, Example 8.1 Nature of electromagnetic waves (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 8: Electromagnetic Waves, 8.3.1 Sources of electromagnetic waves (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 15 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
- NTA JEE (Main) 2026 syllabus, Physics, Unit 15 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
- Standard results (Maxwell's displacement current and plane electromagnetic waves); no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.