EngineeringRise

Nucleus, Mass Defect, Binding Energy, Fission, Fusion

Reviewed Last updated 2026-11-20. Syllabus topic: Nucleus, mass defect, binding energy, fission and fusion.

In short. Nuclear radius goes as A^(1/3), so density is the same for all nuclei. Binding energy is the mass defect times c², at 931.5 MeV per u. Binding energy per nucleon peaks near mass number 56, so fission of heavy nuclei and fusion of light nuclei both release energy.

  • Composition: Z protons, N = A - Z neutrons; radius R = R0 A^(1/3), R0 about 1.2 fm, so the nuclear density, about 2.3 x 10¹7 kg/m³, does not depend on A.
  • Mass defect: delta m = Z m_p + N m_n - m_nucleus; binding energy = delta m c², with 1 u = 931.5 MeV/c².
  • Binding energy per nucleon rises rapidly for light nuclei, peaks at about 8.7 MeV near A = 56 and falls slowly to about 7.6 MeV for the heaviest nuclei.
  • Fission: a heavy nucleus splits into two medium ones, about 200 MeV per event for uranium-235. Fusion: light nuclei combine, as deuterium with tritium for about 17.6 MeV.
  • Energy released = total binding energy after minus total binding energy before, or equally (mass before - mass after) c².

Syllabus line: Atoms and Nuclei Alpha-particle scattering experiment, Rutherford's model of atom, Bohr model, energy levels, hydrogen spectrum. Composition and size of nucleus, atomic masses, mass-energy relation, mass defect, binding energy per nucleon and its variation with mass number, nuclear fission and fusion. (NTA JEE (Main) 2026 syllabus, Physics, Unit 18 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Rutherford and Bohr models, hydrogen spectrum: The nuclear atom and the electron volt as an energy unit come from this topic. Read it first if they are unfamiliar.
  • Electrostatics: potential energy (lesson planned): The Coulomb barrier that fusion must overcome is an electrostatic potential energy. Read this first if k q1 q2/r is unclear.
  • Photoelectric effect and Einstein equation: Energy-mass equivalence and the electron volt are used together. Read this first if unit conversion is slow.

Related topics

The concept step by step

  1. Composition and size of the nucleus

    A nucleus has Z protons and N neutrons, with mass number A = Z + N. Nuclei with the same Z are isotopes, with the same A are isobars and with the same N are isotones. Scattering experiments show the radius follows R = R0 A^(1/3) with R0 about 1.2 fm (1 fm = 10⁻15 m). The volume is therefore proportional to A, and so is the mass, which makes the density the same for every nucleus.

  2. Atomic mass unit and mass-energy relation

    The atomic mass unit u is one twelfth of the mass of a carbon-12 atom, 1.66 x 10⁻27 kg. By Einstein, mass m is equivalent to energy m c², and one u corresponds to 931.5 MeV. In nuclear work tables give atomic masses, which include the electrons, and for most reactions the electron masses cancel, so atomic masses can be used directly if the hydrogen atom mass is used for the proton.

  3. Mass defect and binding energy

    The mass of a nucleus is smaller than the sum of the masses of its separate protons and neutrons. This difference is the mass defect delta m = Z m_p + N m_n - m_nucleus. The binding energy is B = delta m c², the work needed to pull the nucleus apart into free nucleons. A larger binding energy means a more stable nucleus. Binding energy divided by A is the binding energy per nucleon, the measure of stability.

  4. Binding energy per nucleon against mass number

    On the curve of binding energy per nucleon against A it climbs steeply for light nuclei, reaches a broad maximum of about 8.7 MeV near A = 56 (iron region) and then falls slowly to about 7.6 MeV at the heaviest nuclei. Helium-4 stands above its neighbours with about 7.07 MeV. Nuclei near the peak are the most tightly bound. Any change that moves the nucleons towards the peak releases energy.

  5. Fission and fusion

    Fission: a heavy nucleus such as uranium-235 absorbs a neutron and splits into two medium nuclei plus neutrons, because the fragments sit higher on the curve (about 8.5 MeV per nucleon against 7.6 MeV), a gain of about 0.9 MeV on 236 nucleons, near 200 MeV. Fusion: light nuclei combine to a heavier one nearer the peak, as deuterium with tritium gives helium-4 and a neutron with 17.6 MeV. Fusion needs high temperature to overcome the Coulomb repulsion between the nuclei.

  6. Computing the energy of a reaction

    Method one: total binding energy after minus total binding energy before. Method two: (sum of masses before - sum of masses after) x 931.5 MeV, using atomic masses consistently on both sides. The two methods agree. A positive value means energy is released. Beyond the iron peak fusion absorbs energy, and below it fission absorbs energy. When the products fly apart from rest, momentum conservation fixes how the energy is shared, with the lighter product taking the larger share.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

Find the radius of a nucleus of mass number 64, in fm, using R = 1.2 A^(1/3) fm.

Marks-style solution of example 1
StepMarks
R = 1.2 x 64^(1/3).1
64^(1/3) = 4.1
R = 1.2 x 4 = 4.8 fm.1
Total: 3 marks3

Answer: 4.8 fm

Fast method: The cube root of 64 is 4, so the radius is 4 times R0 = 4.8 fm.

Sanity check: Units: fm. The size is of the order of 10⁻15 m, about 10⁵ times smaller than an atom, as expected.

Example 2 (easy)

Find the binding energy of the deuteron, in MeV, given atomic masses: hydrogen-1 1.007825 u, neutron 1.008665 u, deuterium 2.014102 u, with 1 u = 931.5 MeV.

Marks-style solution of example 2
StepMarks
Mass of separate parts = 1.007825 + 1.008665 = 2.016490 u.1
Mass defect = 2.016490 - 2.014102 = 0.002388 u.1
B = 0.002388 x 931.5 = 2.22 MeV.1
Total: 3 marks3

Answer: about 2.22 MeV

Fast method: Mass defect is 0.002388 u; multiply by 931.5 to get 2.22 MeV.

Sanity check: Units: MeV. Per nucleon this is 1.11 MeV, small compared with the typical 8 MeV, as expected for the lightest nucleus after the proton.

Example 3 (medium)

Find the binding energy per nucleon of oxygen-16, in MeV, given atomic masses: hydrogen-1 1.007825 u, neutron 1.008665 u, oxygen-16 15.994915 u, with 1 u = 931.5 MeV.

Marks-style solution of example 3
StepMarks
Constituents: 8 hydrogen atoms and 8 neutrons = 8 x 1.007825 + 8 x 1.008665 = 16.131920 u.1
Mass defect = 16.131920 - 15.994915 = 0.137005 u.1
B = 0.137005 x 931.5 = 127.6 MeV.1
Per nucleon = 127.6/16 = 7.98 MeV.1
Total: 4 marks4

Answer: about 7.98 MeV

Fast method: Mass defect is about 0.137 u, so B is about 127.6 MeV, and 127.6/16 is about 8 MeV.

Sanity check: Units: MeV. About 8 MeV per nucleon is the usual value for middle-weight nuclei, so the result is of the right size.

Example 4 (medium)

Find the density of nuclear matter, in kg per cubic metre, taking the mass of a nucleon as 1.66 x 10⁻27 kg and R = 1.2 x 10⁻15 A^(1/3) m. Does it depend on the mass number?

Marks-style solution of example 4
StepMarks
Mass = A x 1.66 x 10⁻27 kg, volume = (4/3) pi R0³ A with R0 = 1.2 x 10⁻15 m.1
A cancels, so the density does not depend on A.1
rho = 1.66 x 10⁻27/((4/3) pi (1.2 x 10⁻15)³) = 2.29 x 10¹7 kg/m³.2
Total: 4 marks4

Answer: about 2.3 x 10¹7 kg/m³, independent of A

Fast method: The density is u/((4/3) pi R0³): no A appears.

Sanity check: Units: kg/m³. The value is about 10¹4 times the density of water, consistent with an atom whose mass is almost all in a nucleus 10⁵ times smaller in size.

Typical trap: Believing that a heavier nucleus is denser; the volume grows in proportion to the mass, so the density stays the same.

Example 5 (medium)

A nucleus of mass number 236 with binding energy per nucleon 7.6 MeV splits into fragments of mass numbers 140 and 94 with binding energies per nucleon 8.4 MeV and 8.6 MeV, and two free neutrons. Find the energy released, in MeV.

Marks-style solution of example 5
StepMarks
Before: 236 x 7.6 = 1793.6 MeV.1
After: 140 x 8.4 + 94 x 8.6 = 1176 + 808.4 = 1984.4 MeV; the free neutrons have no binding energy.1
Energy released = 1984.4 - 1793.6 = 190.8 MeV.1
Total: 3 marks3

Answer: about 190.8 MeV

Fast method: Gains over 7.6 MeV per nucleon: 140 x 0.8 + 94 x 1.0 = 206 MeV; the two freed neutrons lose 2 x 7.6 = 15.2 MeV; 206 - 15.2 = 190.8 MeV.

Sanity check: Units: MeV. About 200 MeV per fission is the usual size for a heavy nucleus, and the result is close.

Example 6 (hard, multi-step)

In deuterium + tritium giving helium-4 + neutron, find the energy released and the kinetic energy of the neutron if the reactants are at rest and the helium-to-neutron mass ratio is 4 : 1. Atomic masses: deuterium 2.014102 u, tritium 3.016049 u, helium-4 4.002603 u, neutron 1.008665 u; 1 u = 931.5 MeV.

Marks-style solution of example 6
StepMarks
Mass lost = 2.014102 + 3.016049 - 4.002603 - 1.008665 = 0.018883 u.1
Q = 0.018883 x 931.5 = 17.59 MeV.1
Equal and opposite momenta make the kinetic energy inversely proportional to mass, so K_n : K_He = 4 : 1.2
K_n = 4/5 x 17.59 = 14.07 MeV.1
Total: 5 marks5

Answer: Q about 17.6 MeV; neutron kinetic energy about 14.1 MeV

Fast method: Q = 0.018883 x 931.5 = 17.59 MeV and the neutron takes 4/5 of it.

Sanity check: Units: MeV. The two shares 14.07 MeV and 3.52 MeV add to Q, and the lighter particle takes the larger share, as momentum balance requires.

Example 7 (hard, multi-step)

A reactor produces 100 MW of heat entirely from fission, at 200 MeV per fission (1 MeV = 1.6 x 10⁻13 J). Find the number of fissions per second and the mass of uranium-235 fissioned in one day, in g. Use molar mass 235 g/mol and Avogadro number 6.022 x 10²3 per mole.

Marks-style solution of example 7
StepMarks
Energy per fission = 200 x 1.6 x 10⁻13 = 3.2 x 10⁻11 J.1
Fissions per second = 10⁸/(3.2 x 10⁻11) = 3.125 x 10¹8.1
Fissions per day = 3.125 x 10¹8 x 86400 = 2.7 x 10²3.1
Moles = 2.7 x 10²3/6.022 x 10²3 = 0.4484; mass = 0.4484 x 235 = 105 g.2
Total: 5 marks5

Answer: 3.1 x 10¹8 fissions per second; about 105 g per day

Fast method: About 3 x 10¹8 fissions per second; a day has 86400 s; 2.7 x 10²3 nuclei weigh about 105 g.

Sanity check: Units: g. About a tenth of a kilogram of fuel for a day at 100 MW is a plausible size, since each gram of uranium-235 releases of the order of 10¹1 J.

Formulas and units

Formula and unit box for Nucleus, mass defect, binding energy, fission and fusion
ResultFormulaValid whenUnits or noteWorked example
Nuclear radiusR = R0 A^(1/3), R0 = 1.2 fmempirical nuclear size law for nuclei of mass number A; R0 about 1.2 fmfmExample 1
Nuclear densityrho = u/((4/3) pi R0³) = 2.3 x 10¹7uniform nuclear matter with mass about A u; result independent of Akg/m³Example 4
Neutron numberN = A - Znot applicablenumbernone
Mass defectdelta m = Z m_p + N m_n - Mnuclear masses, or atomic masses with electron masses balanced on both sidesuExample 2
Binding energyB = delta m x 931.5delta m in u gives B in MeVMeV (delta m in u)Example 2
Energy-mass unit1 u = 931.5 MeV/c² = 1.66 x 10⁻27 kgnot applicableMeV (kg)none
Binding energy per nucleonB/A, about 8.7 MeV at A near 56not applicableMeVnone
Energy releasedQ = B(products) - B(reactants) = (m_before - m_after) x 931.5nuclear reaction or decay; use nuclear masses or atomic masses with electrons balancedMeVExample 5
Fissions for a given powerN per second = P/(E x 1.6 x 10⁻13), E in MeVall released energy comes from fission; P in watt, E in MeV per fissionper secondExample 7
Two-body split from restK1 : K2 = m2 : m1two products from rest, momentum conserved, non-relativistic speedsratioExample 6

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Subtracting binding energy per nucleon values without multiplying by the number of nucleons. Why it tempts: The curve is plotted per nucleon, and the difference 0.9 MeV looks like an answer; the total is 0.9 times the nucleon count.
  • Using the average binding energy per nucleon as the energy to remove one nucleon. Why it tempts: The average is the number everyone remembers (about 7 to 8 MeV), but the separation energy is a mass difference of one removal and can be quite different.
  • Believing the density of a heavy nucleus is larger. Why it tempts: Mass is larger; the volume is larger in the same proportion, so the density is unchanged.
  • Mixing nuclear masses and atomic masses in one subtraction. Why it tempts: Tables list atomic masses, and the number of electrons is then not balanced on both sides.
  • Saying fusion always releases energy. Why it tempts: Fusion of light nuclei does, but fusing medium or heavy nuclei beyond the peak near A = 56 absorbs energy.
  • Giving the larger share of the kinetic energy to the heavier fragment. Why it tempts: The heavier piece feels more important; with equal momenta K = p²/2m is larger for the lighter piece.

Time per question and fast method

Target: about 90 seconds per question.

Use 1 u = 931.5 MeV and start from the mass defect in u. For fission and fusion use total binding energy after minus before, multiplying every B/A by its number of nucleons. For radii and mass numbers use the cube-root law. For a two-body split from rest give the larger share of energy to the lighter product.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. A nucleus has a mass defect of 0.1 u. What is its binding energy, in MeV?
Show the answer

Answer: C: 93.15 MeV. B = 0.1 x 931.5 = 93.15 MeV.

Question 2. What is the radius, in fm, of a nucleus of mass number 8, using R = 1.2 A^(1/3) fm?
Show the answer

Answer: D: 2.4 fm. R = 1.2 x 2 = 2.4 fm.

Question 3. How many neutrons are in a nucleus of mass number 235 and atomic number 92?
Show the answer

Answer: B: 143. N = A - Z = 235 - 92 = 143.

Question 4. One fission releases 200 MeV, and 1 MeV = 1.6 x 10⁻13 J. What is the energy of one fission in joule, in units of 10⁻11 J?
Show the answer

Answer: A: 3.2. 200 x 1.6 x 10⁻13 = 3.2 x 10⁻11 J.

Question 5. Near which mass number does the binding energy per nucleon peak?
Show the answer

Answer: C: About 56. The peak of about 8.7 MeV per nucleon is near mass number 56 (the iron region); fission and fusion both move nuclei towards it.

Question 6. Why does fusion of two very heavy nuclei not release energy?
Show the answer

Answer: B: They would end further from the peak, with lower total binding energy. Past the peak binding energy per nucleon falls with A, so the product is less bound and energy must be supplied.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Nuclear size, density and composition

R = R0 A^(1/3) with R0 = 1.2 fm gives, for example, R = 3.6 fm for A = 27. The volume (4/3) pi R³ is proportional to A, so the density rho = A u/((4/3) pi R0³ A) = u/((4/3) pi R0³) is independent of A, about 2.3 x 10¹7 kg/m³ with u = 1.66 x 10⁻27 kg and R0 = 1.2 fm. This is vastly higher than the density of ordinary matter, because nearly all the mass of an atom sits in the nucleus. Notation: a nucleus is written with symbol X, mass number A and atomic number Z. Number of neutrons N = A - Z. Edge case: the ratio of radii of two nuclei is the cube root of the ratio of mass numbers, so nuclei with A in the ratio 8 : 1 have radii in the ratio 2 : 1.

Mass defect, binding energy and the unit conversions

delta m = Z m_p + N m_n - M, binding energy B = delta m x 931.5 MeV when delta m is in u. Using atomic masses: delta m = Z m(H-1) + N m_n - m(atom X), because the Z electrons of the atom are balanced by Z electrons in the hydrogen atoms. Do not mix nuclear and atomic masses in one subtraction. Convert carefully: 1 u = 1.66 x 10⁻27 kg = 931.5 MeV/c², and 1 MeV = 1.6 x 10⁻13 J. Binding energy per nucleon B/A is about 8 MeV for most nuclei, which gives a quick estimate of B. The separation energy of a single neutron or proton is a different quantity: it is the mass difference of one specific removal, (m(daughter) + m(nucleon) - m(parent)) c², not the average B/A.

Binding energy curve: reading it correctly

The curve rises quickly to about 8 MeV per nucleon by A = 16 to 20 (with local peaks at helium-4, carbon-12 and oxygen-16), reaches about 8.7 MeV at A near 56, and slowly declines to about 7.6 MeV near A = 240. Consequences: a heavy nucleus splitting into two medium ones increases the total binding energy, so energy is released; two light nuclei fusing give a more tightly bound nucleus, so energy is released; fusing two medium or heavy nuclei would move away from the peak, so it absorbs energy. The energy released in a reaction equals the sum over products of A x (B/A) minus the same sum over reactants. Questions give B/A values and ask for the energy, and the usual error is to subtract per-nucleon values without multiplying by the number of nucleons.

Fission and fusion: energy values and conditions

Fission of uranium-235 by a slow neutron gives two fragments of unequal mass, two or three neutrons and about 200 MeV, most of it as kinetic energy of the fragments. The neutrons released can trigger further fissions, which is the idea of a chain reaction. Energy per fission 200 MeV = 3.2 x 10⁻11 J, so a power of P watt needs P/(3.2 x 10⁻11) fissions per second. Fusion: deuterium + tritium gives helium-4 + neutron + 17.6 MeV; deuterium + deuterium gives about 3.3 MeV with helium-3 and a neutron or about 4 MeV with tritium and a proton. Fusion requires temperatures of millions of kelvin so that the nuclei approach within the range of the nuclear force against the Coulomb repulsion; this is the energy source of stars. Per unit mass fusion releases more energy than fission. In a two-body breakup from rest, the momenta are equal and opposite, so the kinetic energies are in inverse ratio of the masses.

Memory hook

Suppose you pack a school bag with books of the same size, and a bag stitched tightly holds them better than one with loose seams.

  1. To pull every book out of a tight bag, you must do work; a loose bag needs little work. That work is the binding energy.
  2. If the books can be repacked into a tighter arrangement, the extra tightness is given out as the work released, as when nucleons move to a more tightly bound nucleus.
  3. Repacking works only towards the tightest arrangement; past it, you must put work in instead.

Binding energy is the work to separate the nucleons, and reactions that move nucleons towards the peak of the binding energy per nucleon curve release the difference.

Tighter binding means less mass: the lost mass leaves as energy.

Revision card

Try to answer each without looking above.

  1. State the nuclear radius law and show that the nuclear density does not depend on mass number.
  2. Define the mass defect and write the binding energy with the 931.5 MeV per u conversion.
  3. Describe the shape of the binding energy per nucleon curve with the peak position and values.
  4. Give the energy released in fission of uranium-235 and in deuterium plus tritium fusion.
  5. Write the two methods to find the energy released in a nuclear reaction.
  6. Explain why the lighter product of a two-body split from rest takes the larger share of kinetic energy.

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 5; fixed: 5
  • Report: content/reviews/learn7-anu-2026-11-20.md

Textbook references

  • NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 13: Nuclei, Summary Nuclei summary (radius, Eq. 13.5 in 13.3 Size of the nucleus) (read 2026-11-22)
  • NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 13: Nuclei, 13.2 ATOMIC MASSES AND COMPOSITION OF NUCLEUS (read 2026-11-22)
  • NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 13: Nuclei, 13.4.2 Nuclear binding energy (read 2026-11-22)
  • NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 13: Nuclei, Example 13.3 Energy equivalent of one atomic mass unit (read 2026-11-22)
  • NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 13: Nuclei, 13.7.2 Nuclear fusion - energy generation in stars (read 2026-11-22)
  • NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 13: Nuclei, 13.3 SIZE OF THE NUCLEUS (read 2026-11-22)
  • NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 13: Nuclei, 13.7.1 Fission (read 2026-11-22)
  • NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 13: Nuclei, Points to Ponder Points to ponder (read 2026-11-22)

Sources used

  • NTA JEE (Main) 2026 syllabus, Physics, Unit 18 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
  • Deliberate extension beyond the syllabus line: nuclear separation energy (notes, common mistakes, question jm-phy-anu-013) is kept as a short application of the mass-energy relation and mass defect, to separate it from the average binding energy per nucleon.
  • Standard results of school-level nuclear physics (R0 = 1.2 fm, 1 u = 931.5 MeV, binding energy per nucleon curve values, 200 MeV per fission, 17.6 MeV for D-T fusion); no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.