Photoelectric Effect and Einstein Equation: JEE Main Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Photoelectric effect and Einstein equation.
In short. Light of frequency above the threshold f₀ = phi/h ejects electrons instantly, whatever the intensity. Einstein equation: h f = phi + K_max. The stopping potential gives K_max = e V_s, and intensity only sets the saturation current.
- Photon energy E = h f = h c/lambda = 1240/lambda(nm) eV; the photon momentum is p = h/lambda = E/c.
- Einstein equation h f = phi + K_max; below the threshold frequency f₀ = phi/h there is no emission at all.
- Stopping potential V_s = K_max/e depends on frequency and metal, never on intensity; the V_s against f graph is a straight line of slope h/e.
- Saturation current is proportional to intensity (number of photons per second) at a fixed frequency.
Syllabus line: Dual Nature of Matter and Radiation Dual nature of radiation, Photoelectric effect, Hertz and Lenard's observations, Einstein's photoelectric equation, particle nature of light. Matter waves: wave nature of particle, de- Broglie relation. (NTA JEE (Main) 2026 syllabus, Physics, Unit 17 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Electrostatics: potential and the electron volt (lesson planned): Stopping potential and the unit eV rest on potential difference. Read this first if e V = kinetic energy is not clear.
- Electromagnetic waves: frequency, wavelength and c (lesson planned): The relation c = f lambda and the ranges of the spectrum are used throughout.
- Work, energy and power (lesson planned): Work-energy reasoning for stopping an electron and for power as energy per second.
Related topics
- Matter waves and the de Broglie relation
- Dual Nature of Matter and Radiation (lesson planned)
- Electromagnetic Waves (lesson planned)
- Electromagnetic radiation, photoelectric effect and the Bohr model
- Atoms and Nuclei (lesson planned)
The concept step by step
What the experiment shows
When light falls on a clean metal plate in a vacuum tube, electrons can be emitted and collected by a second electrode, giving a photocurrent. Hertz noticed the effect and Lenard measured it. Four observations matter: a threshold frequency below which nothing is emitted however bright the light, emission with no measurable delay, a maximum kinetic energy that grows with frequency but not with intensity, and a saturation current proportional to intensity.
Why the wave picture fails
In the wave picture the energy arrives spread over the surface and grows with intensity. Then a dim red light should eventually free electrons after enough time, and a brighter light should give faster electrons. The experiment shows neither: below the threshold frequency no brightness works, and above it electrons appear at once, with a maximum speed that does not depend on brightness. A new picture is needed in which energy comes in packets.
Photons and the Einstein equation
Einstein proposed that light of frequency f consists of photons, each of energy E = h f = h c/lambda with h = 6.63 x 10⁻34 J s, and each also carrying momentum p = h/lambda. One photon gives all its energy to one electron. The electron needs at least the work function phi to escape; the surplus becomes kinetic energy: h f = phi + K_max. Electrons from deeper levels lose extra energy, so K_max belongs to the most loosely bound electrons.
Threshold, stopping potential and graphs
Setting K_max = 0 gives the threshold frequency f₀ = phi/h and threshold wavelength lambda₀ = h c/phi. To stop the fastest electrons a retarding potential V_s is needed, with e V_s = K_max, so V_s = (h/e) f - phi/e. A graph of V_s against f is a straight line with slope h/e, intercept on the f-axis at f₀ and the same slope for every metal; only the intercept changes with the metal.
Intensity, current and the photon count
Intensity is the number of photons per second per unit area times the photon energy. At fixed frequency, more intensity means more photons, so more electrons per second and a larger saturation current, while K_max and V_s stay the same. A larger frequency at the same power gives fewer photons and each electron has more energy. For a source of power P and photon energy E, the photon rate is P/E.
Particle nature of light: momentum and force
A photon has no rest mass but carries momentum p = E/c = h/lambda. A beam of power P that is completely absorbed delivers momentum at the rate P/c, a force F = P/c; if it is completely reflected the force doubles to 2P/c. These forces are tiny, but the relation p = h/lambda is the same one that links to matter waves in the next topic.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
Find the energy, in eV, of a photon of wavelength 500 nm. Take hc = 1240 eV nm.
| Step | Marks |
|---|---|
| E = hc/lambda with hc = 1240 eV nm. | 1 |
| E = 1240/500. | 1 |
| E = 2.48 eV. | 1 |
| Total: 3 marks | 3 |
Answer: 2.48 eV
Fast method: E in eV is 1240 divided by the wavelength in nm.
Sanity check: Units: eV nm divided by nm gives eV. Visible photons carry about 1.6 to 3.1 eV, and green light at 500 nm giving 2.48 eV sits inside that range. Shorter wavelength gives a larger energy.
Example 2 (easy)
A metal has work function 3.31 eV. Find its threshold frequency in units of 10¹4 Hz. Take h = 6.63 x 10⁻34 J s and e = 1.6 x 10⁻19 C.
| Step | Marks |
|---|---|
| Threshold: h f₀ = phi. | 1 |
| phi = 3.31 x 1.6 x 10⁻19 J = 5.296 x 10⁻19 J. | 1 |
| f₀ = 5.296 x 10⁻19/(6.63 x 10⁻34) = 7.99 x 10¹4 Hz. | 1 |
| The threshold frequency is about 8.0 in units of 10¹4 Hz. | 1 |
| Total: 4 marks | 4 |
Answer: about 8.0 (x 10¹4 Hz)
Fast method: f₀ = phi/h; with phi in eV, f₀ = phi x 2.416 x 10¹4 Hz per eV, so 3.31 x 2.416 = 8.0.
Sanity check: Units: J/(J s) = Hz. The threshold of 8 x 10¹4 Hz corresponds to a wavelength near 375 nm, in the near ultraviolet, which fits a metal with phi above 3 eV.
Example 3 (medium)
Light of wavelength 248 nm falls on a metal of work function 4.2 eV. Find the stopping potential in volt. Take hc = 1240 eV nm.
| Step | Marks |
|---|---|
| Photon energy = 1240/248 = 5.0 eV. | 1 |
| K_max = 5.0 - 4.2 = 0.80 eV. | 1 |
| e V_s = K_max, so V_s = 0.80 V. | 1 |
| Total: 3 marks | 3 |
Answer: 0.80 V
Fast method: The stopping potential in volt equals K_max in eV: 5.0 - 4.2 = 0.8.
Sanity check: Units: an electron volt is the energy gained across one volt, so K in eV equals V_s in volt. Limit check: at wavelength 295 nm (1240/4.2) the photon energy equals phi and V_s would be zero.
Example 4 (medium)
A point source gives a saturation photocurrent of 2.0 microampere at a distance of 1.0 m from a photocell, with stopping potential 1.2 V. The source is moved to 0.50 m. Find the new saturation current in microampere; also state the new stopping potential.
| Step | Marks |
|---|---|
| Intensity at the cell is proportional to 1/d², so it rises by (1.0/0.50)² = 4. | 1 |
| The saturation current is proportional to the photon rate, so it becomes 4 x 2.0 = 8.0 microampere. | 2 |
| The frequency is unchanged, so K_max and the stopping potential stay at 1.2 V. | 1 |
| Saturation current is 8.0 microampere; stopping potential is 1.2 V. | 1 |
| Total: 5 marks | 5 |
Answer: 8.0 microampere; stopping potential 1.2 V
Fast method: Current scales as 1/d² (4 times); stopping potential does not change with intensity.
Sanity check: Units: microampere scaled by a pure number. Limiting case: as the source goes very far the current tends to zero while V_s stays 1.2 V until the current is too small to measure.
Example 5 (medium)
A stopping potential against frequency graph is a straight line through the points (6.0 x 10¹4 Hz, 0.50 V) and (9.0 x 10¹4 Hz, 1.74 V). Find the work function of the metal in eV. Take e = 1.6 x 10⁻19 C.
| Step | Marks |
|---|---|
| Slope = h/e = (1.74 - 0.50)/(9.0 x 10¹4 - 6.0 x 10¹4) = 4.13 x 10⁻15 V s. | 2 |
| So h = 4.13 x 10⁻15 x 1.6 x 10⁻19 = 6.6 x 10⁻34 J s. | 1 |
| The line meets V_s = 0 at f₀ = 6.0 x 10¹4 - 0.50/(4.13 x 10⁻15) = 4.79 x 10¹4 Hz. | 2 |
| phi = h f₀ = (h/e) f₀ in eV = 4.13 x 10⁻15 x 4.79 x 10¹4 = 1.98 eV, about 2.0 eV. | 1 |
| Total: 6 marks | 6 |
Answer: about 1.98 eV (h about 6.6 x 10⁻34 J s)
Fast method: phi in eV = slope x f₀ = intercept of the line on the voltage axis in magnitude: V_s at f = 0 is 0.50 - 4.13 x 10⁻15 x 6.0 x 10¹4 = -1.98 V.
Sanity check: Units: V s x Hz = V, so phi/e in volt equals phi in eV. The slope matches h/e = 4.14 x 10⁻15 V s, so the data are consistent. A work function of 2 eV is typical of an alkali metal.
Example 6 (hard, multi-step)
A beam has two components: 3.1 mW at 400 nm and 5.0 mW at 600 nm. It falls on a photocathode of work function 2.2 eV. Only one photon in 200 of those that can eject electrons does so, and all electrons are collected. Find the saturation current in microampere and the stopping potential in volt. Take hc = 1240 eV nm.
| Step | Marks |
|---|---|
| Photon energies: 1240/400 = 3.1 eV and 1240/600 = 2.07 eV. The 600 nm photons are below phi = 2.2 eV and eject nothing. | 2 |
| Only the 400 nm component counts. Photon rate = 3.1 x 10⁻3/(3.1 x 1.6 x 10⁻19) = 6.25 x 10¹5 per second. | 2 |
| Electron rate = 6.25 x 10¹5/200 = 3.125 x 10¹3 per second, so I = 3.125 x 10¹3 x 1.6 x 10⁻19 = 5.0 x 10⁻6 A. | 2 |
| Stopping potential: K_max = 3.1 - 2.2 = 0.90 eV, so V_s = 0.90 V; current 5.0 microampere. | 1 |
| Total: 7 marks | 7 |
Answer: saturation current 5.0 microampere; stopping potential 0.90 V
Fast method: Discard the component below threshold first. Then the electron charge cancels: I = (P in W/photon energy in eV) x efficiency = (3.1 x 10⁻3/3.1)/200 = 5.0 x 10⁻6 A.
Sanity check: Order of magnitude: 3.1 mW of 3.1 eV photons would give 1.0 mA if every photon released an electron; one in 200 gives 5 microampere. The stopping potential is set by the 400 nm light alone, since the 600 nm photons carry only 2.07 eV, below phi.
Example 7 (medium)
A beam of power 3.0 W of wavelength 600 nm is completely absorbed by a screen. Find the momentum of one photon and the force on the screen. Take h = 6.63 x 10⁻34 J s and c = 3.0 x 10⁸ m/s. Give the force in units of 10⁻8 N.
| Step | Marks |
|---|---|
| Photon momentum p = h/lambda = 6.63 x 10⁻34/(600 x 10⁻9) = 1.1 x 10⁻27 kg m/s. | 1 |
| Photon rate N = P/(h c/lambda) = 3.0/(3.3 x 10⁻19) = 9.1 x 10¹8 per second. | 1 |
| Force = N p = 9.1 x 10¹8 x 1.1 x 10⁻27 = 1.0 x 10⁻8 N. | 1 |
| Check: F = P/c = 3.0/(3.0 x 10⁸) = 1.0 x 10⁻8 N, which is 1.0 in units of 10⁻8 N. | 1 |
| Total: 4 marks | 4 |
Answer: p = 1.1 x 10⁻27 kg m/s; force = 1.0 x 10⁻8 N
Fast method: F = P/c for complete absorption: 3/(3 x 10⁸) = 10⁻8 N.
Sanity check: Units: W/(m/s) = N. A force of 10⁻8 N from a 3 W beam is about the weight of one microgram, which shows why radiation force is hard to notice. For perfect reflection the force doubles.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Photon energy | E = h f = h c/lambda = 1240/lambda(nm) eV | any photon; the 1240/lambda form needs lambda in nm and E in eV | J or eV (h = 6.63 x 10⁻34 J s) | Example 1 |
| Photon momentum | p = E/c = h/lambda | any photon, in vacuum | kg m/s | Example 7 |
| Einstein equation | h f = phi + K_max | one photon absorbed by one electron; K_max for the fastest emitted electron | J or eV | Example 3 |
| Threshold | f₀ = phi/h; lambda₀(nm) = 1240/phi(eV) | photon frequency at or above f₀; lambda₀ form needs nm and eV | Hz (nm) | Example 2 |
| Stopping potential | e V_s = K_max; V_s = (h/e) f - phi/e | retarding potential that just stops the fastest photoelectrons | V | Example 3 |
| Graph slope (V_s against f) | h/e = 4.14 x 10⁻15 V s | graph of V_s against f for any metal; slope is independent of the metal | V s | Example 5 |
| Photocurrent | I_sat = eta (P/E) e | every ejected electron is collected (saturation); eta electrons per photon | A (eta = electrons per photon) | Example 6 |
| Radiation force (normal incidence) | F = P/c absorbed; 2P/c reflected | beam at normal incidence on a perfect absorber (P/c) or reflector (2P/c) | N | Example 7 |
| Intensity from a point source | I proportional to 1/d² | point source in free space with no absorption | W/m² | Example 4 |
Common mistakes and speed
- Reporting the photon energy as the maximum kinetic energy. Why it tempts: The photon energy is the first number computed, and one option is always equal to it.
- Saying doubling the intensity doubles the stopping potential. Why it tempts: More light feels like more energy, but each electron takes energy from a single photon, so only the number of electrons doubles.
- Taking K_max to be proportional to frequency, so doubling f doubles K. Why it tempts: The relation looks like E = h f; but h f = phi + K, so K becomes 2 h f - phi, which is more than double.
- Subtracting wavelengths directly, lambda - lambda₀. Why it tempts: Wavelength and threshold wavelength are given in the same units, and subtraction mimics K = E - phi; energy depends on the reciprocal of wavelength.
- Using nm with hc = 1240 and getting J instead of eV, or mixing eV and J in one line. Why it tempts: The same numeric constant appears in two unit systems; options at a factor of 1.6 x 10⁻19 reward the slip.
Time per question and fast method
Target: about 90 seconds per question.
Convert at once: E(eV) = 1240/lambda(nm). Then K_max = E - phi and V_s = K_max in volt. For ratios use K proportional to (1/lambda - 1/lambda₀), working in a common unit. For graphs, read the slope as h/e and the intercept as -phi/e. For current questions decide first whether the photon is above the threshold.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- Light of wavelength 400 nm falls on a metal surface of work function 2.0 eV. Take hc = 1240 eV nm. The… Verified (T1)
- For a metal, the stopping potential is 2.00 V for light of wavelength 200 nm and 0.76 V for light of… Verified (T1)
- A metal has a threshold wavelength of 360 nm. It is illuminated first with light of wavelength 240 nm and… Verified (T1)
- Monochromatic light of wavelength 400 nm and power 2.48 mW falls on a photocathode. Only one photon in every… Verified (T3)
- Light of wavelength 400 nm falls on a metal of work function 1.6 eV (take hc = 1240 eV nm). A photoelectron… Verified (T1)
- An isolated, initially uncharged metal sphere of radius 10 cm and work function 2.5 eV is illuminated with… Verified (T1)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Observations of Hertz and Lenard and what they imply
Hertz found that ultraviolet light on a spark gap eased the spark, and Lenard showed that the emitted carriers were electrons. The results: (1) for a given metal there is a threshold frequency f₀; below it no emission occurs, however intense the light. (2) Above f₀ the emission is practically instantaneous, with a delay of the order of 10⁻9 s or less, far shorter than a wave theory predicts. (3) The maximum kinetic energy increases linearly with frequency and is independent of intensity. (4) For a given frequency above f₀ the photocurrent is proportional to the intensity. Observations 1 to 3 contradict the wave theory and are explained at once by photons.
Einstein equation, work function and units
h f = phi + K_max, where phi is the minimum energy to remove an electron from the metal surface, typically a few eV (about 2 to 5 eV for common metals). Use the electron volt for atomic energies: 1 eV = 1.6 x 10⁻19 J. Handy form: E(eV) = 1240/lambda(nm), because h c = 1240 eV nm = 1.24 x 10⁻6 eV m. The same relation gives the threshold: lambda₀(nm) = 1240/phi(eV). Never subtract a wavelength from a wavelength; subtract energies, or use K_max = h c (1/lambda - 1/lambda₀). K_max is a maximum; electrons from lower levels leave with less.
Stopping potential, retarding and accelerating fields
With the collector at a negative potential -V relative to the emitter, an electron of energy K reaches it only if K is greater than e V. The current falls to zero at V = V_s, where e V_s = K_max. A positive potential collects more electrons until all emitted electrons are collected: the saturation current, I_sat = (electron emission rate) x e. Beyond saturation, a bigger accelerating voltage does not raise the current. The photocurrent against voltage curves for two intensities at the same frequency share the same stopping potential but have different saturation currents; for two frequencies at equal intensity the stopping potentials differ.
Graphs examiners use
K_max against f: straight line, slope h (in J s or eV s), intercepts: f₀ on the axis and -phi on the energy axis (by extension). V_s against f: slope h/e = 4.14 x 10⁻15 V s, intercept on the V axis is -phi/e. Lines for different metals are parallel. I against V: both curves start at the stopping potential on the negative side and saturate on the positive side. I_sat against intensity: straight line through the origin; I_sat against frequency at constant intensity is not a straight line, because the photon rate falls as f increases. From two data points on a V_s against f line one gets h and phi without any other data.
Particle nature of light, photon rate and radiation force
Photon energy E = h f, momentum p = E/c = h/lambda, zero rest mass, speed c. A source of power P emits P/E photons per second. If a fraction eta of photons release an electron (quantum efficiency), the current is I = eta (P/E) e. For a perfectly absorbing surface of a beam of power P the force is F = P/c, and for perfect reflection 2P/c at normal incidence. Light of high intensity but frequency below f₀ liberates nothing in this model because a single photon cannot add to another photon: ordinary intensities do not give multi-photon absorption.
What examiners test and edge cases
Typical items: K_max or V_s from wavelength and work function (use 1240 eV nm); comparing two wavelengths with the same metal; threshold wavelength from two stopping potentials; effect of doubling intensity (current doubles, V_s unchanged) or doubling frequency (K_max does not double: K_max becomes 2 h f - phi); photon count from power; graph slope and intercept; electron in a magnetic field after emission, r = sqrt(2 m K)/(e B); charging of an isolated sphere to V_s. Edge cases: if h f is less than phi there is no emission and V_s is not defined; surface contamination and temperature change phi; a collector of a different material introduces a contact potential, which these items ignore.
Memory hook
Suppose a fruit seller at a roadside stall sells mangoes only when the buyer pays at least Rs 40 for a single kilo, and she does not accept many small coins added together over the day.
- A buyer offering one Rs 30 note is refused, even if thirty buyers queue with Rs 30 each; one payment must reach Rs 40 by itself (threshold frequency).
- A buyer with a Rs 50 note buys one kilo at once and keeps Rs 10 as change (K_max = h f - phi).
- More buyers in the queue means more kilos sold per hour, but the change each buyer carries away stays Rs 10 (intensity raises current, not K_max).
One photon pays for one electron: the price is the work function phi, the change is the kinetic energy, and the number of customers is the intensity.
One photon, one electron: pay the work function, keep the change.
Revision card
Try to answer each without looking above.
- State the Einstein photoelectric equation and say which electron K_max refers to.
- Write E in eV in terms of wavelength in nm, and the threshold wavelength of a metal of work function phi.
- What happens to saturation current and stopping potential when intensity doubles, and when frequency rises?
- What is the slope of the V_s against f graph and what does the intercept give?
- Name the observations of Hertz and Lenard that the wave theory cannot explain.
- Give the photon momentum and the radiation force on a perfectly absorbing screen of power P.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 1; fixed: 1
- Report: content/reviews/learn7-dnr-2026-11-20.md
Textbook references
- NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 11: Dual Nature of Radiation and Matter, Summary Dual nature summary, point 7 (Eq. 11.2 in 11.6) (read 2026-11-22)
- NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 11: Dual Nature of Radiation and Matter, 11.6 EINSTEIN'S PHOTOELECTRIC EQUATION: ENERGY QUANTUM OF RADIATION (read 2026-11-22)
- NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 11: Dual Nature of Radiation and Matter, 11.5 PHOTOELECTRIC EFFECT AND WAVE THEORY OF LIGHT (read 2026-11-22)
- NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 11: Dual Nature of Radiation and Matter, Example 11.2 Work function of caesium (read 2026-11-22)
- NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 11: Dual Nature of Radiation and Matter, 11.4.3 Effect of frequency of incident radiation on stopping potential (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 17 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
- Standard results of school-level dual nature of radiation and matter; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.