IUPAC Nomenclature and Isomerism of Coordination Compounds
Reviewed Last updated 2026-11-20. Syllabus topic: IUPAC nomenclature and isomerism of coordination compounds.
In short. Names list ligands alphabetically before the metal, with multiplying prefixes ignored for order; an anionic complex ends in -ate, and the oxidation state is a Roman numeral. Isomerism is structural (ionisation, hydrate, linkage) or stereo (cis/trans, fac/mer, optical).
- Ligands are cited in alphabetical order, ignoring multiplying prefixes such as di and tri; the metal follows with its oxidation state in Roman numerals.
- Use di, tri, tetra for simple ligand names and bis, tris, tetrakis with brackets for names that already contain a prefix or locants.
- A complex anion ends in -ate and uses the Latin stem for some metals: ferrate, cuprate, argentate, aurate, plumbate, stannate.
- Structural isomers differ in connectivity (ionisation, hydrate, linkage, coordination); stereoisomers differ in arrangement (geometrical, optical).
- Octahedral cis-[M(AA)2B2] and [M(AA)3] are optically active; MA3B3 gives fac and mer; square planar Mabcd gives three isomers.
Syllabus line: COORDINATION COMPOUNDS Introduction to coordination compounds. Werner's theory, ligands, coordination number, denticity, chelation, IUPAC nomenclature of mononuclear co-ordination compounds, isomerism, Bonding: Valence bond approach and basic ideas of Crystal field theory, colour and magnetic properties, importance of coordination compounds (in qualitative analysis, extraction of metals and in biological systems). (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 12 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Werner theory, ligands, coordination number and chelation: Ligand charges, denticity and the bracket notation are needed to name a complex and to count isomers. Read this first if you cannot find the oxidation state from the charge.
- Covalent bonding, VSEPR, hybridisation and resonance: Hybrid orbitals and the shapes they give (sp3, dsp2, sp3d2, d2sp3) are the language of valence bond theory. Read this first if hybridisation is shaky.
Related topics
The concept step by step
Step 1: Find the charge and the oxidation state
Before naming, write the complex ion with its charge. Add up the charges of all ligands and subtract from the overall charge of the ion to get the oxidation state of the metal. In [Co(en)2Cl2]Cl the complex cation is +1 (one chloride outside); the two Cl- contribute -2 and en is neutral, so cobalt is +3. The oxidation state goes in Roman numerals in brackets with no space after the metal name.
Step 2: Assemble the name in the fixed order
Name the cation first and the anion second. Inside the complex, list ligands in alphabetical order regardless of charge, then the metal. The alphabetical order ignores multiplying prefixes: dichlorido is placed under c and tetraammine under a. Use di, tri, tetra, penta, hexa for simple ligands. For ligands whose names are complex (ethane-1,2-diamine) or already contain a prefix, put the ligand name in brackets and use bis, tris, tetrakis, and alphabetise from the first letter of the complete name, so ethane-1,2-diamine falls under e.
Step 3: Ligand names and the -ate rule
In the current convention anionic ligand names ending -ide, -ate and -ite change to -ido, -ato and -ito (chloride to chlorido, cyanide to cyanido, hydroxide to hydroxido, sulfate to sulfato, oxalate to oxalato); older papers use -o (chloro, cyano, hydroxo). Neutral ligands keep their names except aqua (H2O), ammine (NH3, with two m), carbonyl (CO) and nitrosyl (NO). If the whole complex is an anion, the metal name ends in -ate, with Latin stems for ferrate (Fe), cuprate (Cu), argentate (Ag), aurate (Au), plumbate (Pb) and stannate (Sn). The number of cations or anions outside is not written: K4[Fe(CN)6] is potassium hexacyanidoferrate(II).
Step 4: Structural isomers
Structural isomers have the same formula but different bonds. Ionisation isomers exchange an ion between the inner sphere and the outside: [Co(NH3)5Br]SO4 and [Co(NH3)5(SO4)]Br. Hydrate isomers exchange water between inner and outer positions: [Cr(H2O)6]Cl3 and [Cr(H2O)5Cl]Cl2.H2O. Linkage isomers use an ambidentate ligand bonded through a different atom: nitro-N and nitrito-O. Coordination isomers swap ligands between a cationic and an anionic complex, as in [Co(NH3)6][Cr(CN)6] and [Cr(NH3)6][Co(CN)6].
Step 5: Stereoisomers
Geometrical isomers differ in the spatial arrangement of the same bonds: cis and trans in square planar MA2B2 and octahedral MA4B2, and facial (fac) and meridional (mer) in octahedral MA3B3. Optical isomers are non-superimposable mirror images, so the ion must lack a mirror plane and a centre of inversion. Tris-chelates [M(AA)3] and cis-[M(AA)2B2] are chiral; the trans form is not. Counts to remember: square planar MA2B2 has 2, square planar Mabcd has 3, octahedral MA4B2 has 2, MA3B3 has 2, [M(AA)2B2] has 3 stereoisomers (cis pair plus trans), and [M(AA)3] has 2.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
Find the oxidation state of iron in K3[Fe(CN)6].
| Step | Marks |
|---|---|
| The complex ion balances three K+, so its charge is 3-. | 1 |
| Six CN- contribute 6 x (-1) = -6. | 1 |
| x - 6 = -3, so iron is +3. | 1 |
| Total: 3 marks | 3 |
Answer: +3
Fast method: x = charge on ion + 6 = -3 + 6 = +3.
Sanity check: Fe(III) with six cyanide is a familiar ion, and 3+ is within the usual range for iron.
Example 2 (easy)
Name the compound [Co(NH3)5Cl]Cl2 using chlorido and ammine.
| Step | Marks |
|---|---|
| Complex cation charge +2 (two chloride outside); five NH3 neutral, one Cl- gives -1, so cobalt is +3. | 1 |
| Alphabetical order: ammine (a) before chlorido (c); prefixes penta and none. | 1 |
| Oxidation state +3 (cobalt(III)): pentaamminechloridocobalt(III) chloride. | 1 |
| Total: 3 marks | 3 |
Answer: pentaamminechloridocobalt(III) chloride
Fast method: Alphabetical: ammine, chlorido; oxidation 2 + 1 = 3.
Sanity check: A cationic complex has no -ate, and two chloride outside balance the 2+ charge.
Example 3 (medium)
Name [Cr(H2O)4Cl2]Cl using aqua and chlorido.
| Step | Marks |
|---|---|
| Complex cation charge +1; two Cl- give -2, water neutral, so chromium is +3. | 1 |
| Alphabetical: aqua (a) before chlorido (c); the prefixes tetra and di do not affect order. | 1 |
| Oxidation state +3 (chromium(III)): tetraaquadichloridochromium(III) chloride. | 1 |
| Total: 3 marks | 3 |
Answer: tetraaquadichloridochromium(III) chloride
Fast method: Order a before c; chromium +3.
Sanity check: Oxidation state 3 matches chromium(III) with a coordination number of 6 (4 + 2).
Example 4 (medium)
For CrCl3.6H2O (coordination number 6; only water and chloride bonded), how many different formulas of the type [Cr(H2O)(6-k)Clk]Cl(3-k).kH2O, with k chloride inside the sphere, are possible on paper, ignoring geometrical isomers?
| Step | Marks |
|---|---|
| Let k chloride be inside the sphere; k = 0 to 3. | 1 |
| Water inside = 6 - k, never more than the 6 present, so each k works. | 1 |
| Forms: k = 0, 1, 2, 3: 4 forms. | 1 |
| Total: 3 marks | 3 |
Answer: 4
Fast method: Chloride inside can be 0, 1, 2 or 3: four formulas on paper (three are reported experimentally).
Sanity check: There cannot be more than 4 because only 3 chloride are present; k = 0 gives [Cr(H2O)6]Cl3.
Example 5 (hard, multi-step)
How many stereoisomers, counting each enantiomer, does the octahedral ion [Co(en)2Cl2]+ have? Explain which of them are optically active.
| Step | Marks |
|---|---|
| Trans-dichlorido: en rings in one plane, Cl above and below: has a mirror plane, achiral: 1 isomer. | 2 |
| Cis-dichlorido: the two en rings wrap in a propeller-like arrangement with a non-superimposable mirror image: 2 enantiomers. | 2 |
| Total stereoisomers = 1 + 2 = 3; the two cis forms are optically active. | 1 |
| Total: 5 marks | 5 |
Answer: 3 (the cis pair is optically active)
Fast method: Cis and trans give 2 geometrical forms; cis is chiral, so add 1: 3.
Sanity check: More than the two geometrical forms because chirality adds one, and fewer than the 4 or 5 a wrong count of ligand permutations might suggest.
Example 6 (hard)
The square planar complex [Pt(NH3)(py)ClBr] (py is pyridine) has four different ligands. How many geometrical isomers exist? A student argues that there are 6 and another that a tetrahedral shape would give none.
| Step | Marks |
|---|---|
| Place four different ligands at the corners of a square: 4! = 24 labelled arrangements. | 1 |
| Operations that turn the square into itself include 4 rotations and 4 flips (flipping is allowed in 3D): 8 operations. | 2 |
| Number of distinct isomers = 24 / 8 = 3; a tetrahedral Mabcd has no geometrical isomers (it is chiral instead), but this ion is square planar. | 1 |
| Total: 4 marks | 4 |
Answer: 3
Fast method: For Mabcd in a plane: 3 (cis-trans pairings of the four ligands).
Sanity check: Fewer than the 6 a student might guess by counting only rotations; 3 is the textbook result for Mabcd.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Name order | cation, then anion; inside: ligands alphabetical, metal, oxidation state (Roman) | not applicable | n/a (text) | Example 2 |
| Prefixes | di tri tetra penta hexa; bis tris tetrakis for composite names | not applicable | n/a (text) | Example 2 |
| Anionic complex | metal name ends in -ate; ferrate, cuprate, argentate, aurate, plumbate, stannate | when the complex ion is negatively charged | n/a (text) | none |
| Square planar MA2B2, Mabcd | 2 and 3 geometrical isomers | square planar complexes with monodentate ligands only | dimensionless integer | Example 6 |
| Octahedral MA4B2, MA3B3 | 2 each (cis/trans; fac/mer) | octahedral complexes with monodentate ligands only | dimensionless integer | none |
| [M(AA)2B2], [M(AA)3] | 3 and 2 stereoisomers (cis pair + trans; enantiomer pair) | octahedral complexes with a symmetrical bidentate ligand AA | dimensionless integer | Example 5 |
| Structural isomer types | ionisation, hydrate, linkage, coordination | not applicable | n/a (text) | none |
Common mistakes and speed
- Alphabetising with the multiplying prefix (putting tetraammine under t). Why it tempts: The written name begins with the prefix, so the eye places it at that letter.
- Writing di where bis is required, as in di(ethane-1,2-diamine). Why it tempts: Di is the familiar prefix, but composite names need bis and brackets.
- Forgetting -ate for an anionic complex or using the English metal name (ironate). Why it tempts: The cation naming habit (iron(II)) is carried over to anions where the Latin stem ferrate is needed.
- Calling a trans complex optically active, or missing that cis-[M(AA)2B2] is chiral. Why it tempts: Cis and trans are the first pair that comes to mind for geometrical isomers, so the optical pair hidden inside cis is missed.
- Confusing ionisation and hydrate isomerism. Why it tempts: Both move something between the inside and outside of the bracket; the difference is that hydrate isomerism moves water.
Time per question and fast method
Target: about 90 seconds per question.
For naming: find the oxidation state from the charge, alphabetise ignoring di/tri, add -ate for anions. For isomers: apply the known counts (MA2B2 planar 2, Mabcd planar 3, MA4B2 2, MA3B3 2, [M(AA)2B2] 3, [M(AA)3] 2) and check chirality by looking for a mirror plane.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- Using the current IUPAC convention for ligand names (chlorido, cyanido), the correct name of K4[Fe(CN)6] is Verified (T1)
- Using the current IUPAC convention (chlorido), and taking en as ethane-1,2-diamine, the correct name of the… Verified (T1)
- The octahedral complex ion [Co(en)2Cl2]+ contains two didentate en ligands, each spanning two adjacent (cis)… Verified (T1)
- Hydrate isomers differ in how many water molecules are bonded to chromium and how many sit outside the… Verified (T1)
- The octahedral complex ion [Co(en)(NH3)(H2O)Cl2]+ contains one didentate en ligand spanning two adjacent… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Naming rules in full
Rule list: (1) cation before anion; (2) ligands before metal; (3) ligands in alphabetical order, ignoring prefixes di, tri and so on but not ignoring parts of the name itself (dimethylamine is under d); (4) multiplicity: di, tri, tetra for simple names, bis, tris, tetrakis with brackets for composite names; (5) oxidation state in Roman numerals in brackets after the metal; (6) anionic complexes end in -ate; (7) bridging and ambidentate ligands carry a prefix or symbol saying how they bond, such as nitrito-N or nitrito-O. Examiners often give both the formula and four candidate names and test alphabetical order, the oxidation state or the -ate ending.
Writing the formula from a name and the ion count
In formulas the metal comes first, then the ligands in alphabetical order, whatever their charge. NCERT orders them by ligand name, so ammine comes before chlorido and the formula is written [Co(NH3)4Cl2]+; strict IUPAC formula order goes by the first symbol of the formula, which would write [CoCl2(NH3)4]+, so follow the order a question uses; the coordination entity is enclosed in square brackets. Writing the formula from a name is the reverse process: the oxidation state and ligand charges give the charge on the bracket, and the counter ions balance it. For example, potassium tris(oxalato)ferrate(III) contains Fe3+ and three oxalate ions of charge 2-, giving a 3- ion and three K+ outside.
Structural isomerism details
Ionisation isomers show different ions in water (one gives sulfate with barium chloride, the other gives bromide with silver nitrate). Hydrate isomers differ in the number of water molecules inside the sphere; for CrCl3.6H2O the possible forms have 0, 1, 2 or 3 chloride inside, so four formulas are possible on paper; three are reported (violet, pale green and dark green). Linkage isomerism needs an ambidentate ligand; coordination isomerism needs two metal centres, one in a cation and one in an anion. Keep these four distinct in assertion-reason items.
Stereoisomerism: counting and chirality
Counting stereoisomers is a matter of symmetry. Take the octahedron and count arrangements that cannot be turned into each other by a rotation; mirror images count separately because a mirror reflection is not a rotation. For [Co(en)2Cl2]+: trans (achiral) and cis (two enantiomers): 3. For [M(AA)3]: 2 enantiomers. For octahedral MA3B3: fac and mer, both achiral, giving 2. For square planar complexes the plane is itself a mirror plane, so optical isomerism does not occur there unless the ligands are unsymmetrical in a special way; tetrahedral MA2B2 has no geometrical isomers, and a tetrahedral MABCD is chiral. Edge case: a tetrahedral complex is rarely resolved because it racemises quickly.
Memory hook
Suppose you pack a school tiffin for four family members and the pattern of containers on the bag strap matters: the same four dishes in a different order are not the same pack.
- If two dishes are identical (two chapati boxes) the number of different-looking packs falls, just as two identical ligands reduce the number of distinct arrangements around the metal.
- A pack and its mirror image on the other strap side look alike but cannot be exactly overlapped: that is chirality, and left and right hands are the standard picture.
- Writing the order on the lid follows a fixed rule (alphabetical by the dish name, ignoring how many of each): the same idea as naming ligands alphabetically and ignoring di and tri.
A name follows a fixed alphabetical rule that ignores multiplying prefixes, and the count of isomers depends on which arrangements can be turned into each other by rotation.
Alphabetical ignoring di and tri; isomers are arrangements no rotation can merge.
Revision card
Try to answer each without looking above.
- State the order in which ligands, metal and counter ions are written in a name.
- When is bis used instead of di, and where is the ligand alphabetised?
- Give the Latin-stem names for the -ate form of Fe, Cu, Ag and Au.
- List the four kinds of structural isomerism with one example each.
- How many stereoisomers do [M(AA)3] and [M(AA)2B2] have, and which are chiral?
- How many geometrical isomers do square planar MA2B2 and Mabcd have?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 4; fixed: 4
- Report: content/reviews/learn7-crd-2026-11-20.md
Textbook references
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 5: Coordination Compounds, 5.3 Nomenclature of Coordination Compounds (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 5: Coordination Compounds, 5.4.5 Ionisation Isomerism (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 5: Coordination Compounds, 5.4.4 Coordination Isomerism (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 5: Coordination Compounds, 5.4.2 Optical Isomerism (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 5: Coordination Compounds, 5.3.1 Formulas of Mononuclear Coordination Entities (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 5: Coordination Compounds, 5.4.6 Solvate Isomerism (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 5: Coordination Compounds, 5.4.3 Linkage Isomerism (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 5: Coordination Compounds, 5.4.1 Geometric Isomerism (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 12, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
- NCERT Class 12 Chemistry, Coordination Compounds chapter: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.