Hybridisation, Classification and IUPAC Naming: JEE Main
Reviewed Last updated 2026-11-21. Syllabus topic: Tetravalency, hybridisation, classification and nomenclature.
In short. A carbon atom is tetravalent and takes sp3, sp2 or sp hybridisation according to whether it has four, three or two sigma bonds. Compounds are grouped by skeleton, functional group and homologous series, and named by the longest chain, principal group and lowest locants.
- Hybridisation = number of sigma bonds plus lone pairs on the atom: 4 gives sp3 (109.5 degrees, 25 percent s), 3 gives sp2 (120 degrees, 33.3 percent s), 2 gives sp (180 degrees, 50 percent s).
- Each double bond is one sigma plus one pi bond; each triple bond is one sigma plus two pi bonds; pi bonds never change the hybridisation count.
- A homologous series has one general formula, one functional group and members that differ by CH2 (14 atomic mass units).
- IUPAC order of decisions: principal functional group, longest chain containing it, lowest locant to the principal group, then to multiple bonds, then to prefixes, then alphabetical order of prefixes.
- Greater s-character means a shorter, stronger and more acidic C-H bond: sp beats sp2 beats sp3.
Syllabus line: SOME BASIC PRINCIPLES OF ORGANIC CHEMISTRY Tetravalency of carbon, shapes of simple molecules - hybridization (s and p): classification of organic compounds based on functional groups and those containing halogens, oxygen, nitrogen and sulphur, homologous series: Isomerism - structural and stereoisomerism. Nomenclature (Trivial and IUPAC) Covalent bond fission - Homolytic and heterolytic, free radicals, carbocations and carbanions, stability of carbocations and free radicals, electrophiles and nucleophiles. Electronic displacement in a covalent bond - Inductive effect, electromeric effect, resonance and hyperconjugation. Common types of organic reactions- Substitution, addition, elimination and rearrangement. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 14 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Covalent bonding, VSEPR, hybridisation and resonance: Steric number, lone pairs and bond angles are used in every hybridisation question here. Read this first if the idea of a hybrid orbital is new.
- Quantum numbers, orbital shapes and electronic configuration: The 2s and 2p orbitals of carbon and the idea of promotion need this. Read this first if orbital shapes are shaky.
Related topics
The concept step by step
Step 1: Carbon makes four bonds, always
Carbon has the ground-state configuration 1s2 2s2 2p2, which suggests two bonds, yet it forms four in almost every organic compound. One 2s electron is promoted to the empty 2p orbital, giving four unpaired electrons, and the energy spent is repaid by forming two extra bonds. This is tetravalency. The four bonds are equivalent in methane, which is explained by mixing the orbitals, called hybridisation.
Step 2: Count sigma bonds and lone pairs to get hybridisation
To find the hybridisation of any atom, count the sigma bonds (single bonds, and the sigma part of each double or triple bond, including bonds to hydrogen) and add the lone pairs. Total 4 means sp3, total 3 means sp2 and total 2 means sp. Pi bonds are not counted because they use leftover unhybridised p orbitals. This one rule decides carbon, nitrogen and oxygen alike.
Step 3: Shape, angle and s-character follow
sp3 gives a tetrahedron with 109.5 degrees (25 percent s-character), sp2 a trigonal planar arrangement with 120 degrees (33.3 percent s) and sp a linear arrangement with 180 degrees (50 percent s). More s-character means the electrons are held closer to the nucleus, so the C-H bond is shorter, stronger and the C-H hydrogen is more acidic: ethyne is more acidic than ethene, which is more acidic than ethane.
Step 4: Classify by skeleton and by functional group
Open-chain (acyclic) compounds have no ring; closed-chain compounds are homocyclic (alicyclic or aromatic) or heterocyclic when a ring atom is not carbon. Compounds are saturated or unsaturated. A functional group is the atom or group that decides the chemistry: halogen (-X), hydroxyl (-OH), ether (-O-), aldehyde (-CHO), ketone (>C=O), carboxylic acid (-COOH), ester, amine (-NH2), nitro (-NO2), nitrile (-CN), thiol (-SH) and thioether (-S-).
Step 5: Homologous series
A homologous series is a family with the same functional group and general formula in which consecutive members differ by one CH2 unit (14 u in mass). Alkanes CnH2n+2, alkenes CnH2n and alkynes CnH2n-2 are examples. Chemical properties are alike and physical properties change gradually. Members of different families are not homologues even if they differ by CH2, so methanol and methoxymethane are not a homologous pair.
Step 6: Name an alkane in four moves
First pick the longest continuous chain, which fixes the parent name (meth, eth, prop, but, pent, hex, hept, oct). Second, number from the end that gives the lowest locants to the substituents taken together. Third, name the branches (methyl, ethyl, propyl). Fourth, list the prefixes in alphabetical order, ignoring di, tri, tetra, and join with hyphens and commas. If two chains are equally long, take the one with more branches.
Step 7: Add a functional group and a double bond
The principal functional group decides the suffix and the chain: acids rank above aldehydes, then ketones, then alcohols, then amines, then multiple bonds. Number the chain to give the principal group the lowest locant first, then the double or triple bond, then the prefixes. Lower-ranking groups become prefixes such as hydroxy, oxo, amino or halo. Trivial names such as acetone, formic acid and toluene are accepted by the syllabus alongside IUPAC names.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
How many sp2 hybridised carbon atoms are present in propene, CH3-CH=CH2?
| Step | Marks |
|---|---|
| Count sigma bonds on each carbon: CH3 has 4 (three H and one C); the middle CH has 3 (one H, two C); the terminal CH2 has 3 (two H, one C). | 2 |
| Three sigma bonds means sp2, four means sp3. | 1 |
| Number of sp2 carbons = 2 (the two doubly bonded carbons). | 1 |
| Total: 4 marks | 4 |
Answer: 2
Fast method: Each carbon of a C=C is sp2 and the CH3 is sp3: 2.
Sanity check: Three carbons in total, 2 + 1 = 3, and a C=C always uses exactly two sp2 carbons, so 2 is consistent.
Example 2 (easy)
Find the percentage s-character of the carbon-hydrogen bond in ethene.
| Step | Marks |
|---|---|
| Each carbon of ethene has 2 C-H bonds and 1 C-C sigma bond, 3 sigma bonds in all, so it is sp2. | 1 |
| sp2 uses one s and two p orbitals: s-character is 1/3. | 1 |
| Percentage s-character = 100 / 3 = 33.3 percent. | 1 |
| Total: 3 marks | 3 |
Answer: 33.3 percent
Fast method: sp3, sp2, sp give 25, 33.3, 50 percent; ethene carbons are sp2.
Sanity check: The value lies between sp3 (25) and sp (50), as it should for sp2.
Example 3 (medium)
How many sigma bonds are present in but-2-enenitrile, CH3-CH=CH-C≡N?
| Step | Marks |
|---|---|
| Hydrogen bonds: CH3 has 3, each CH has 1, so 3 + 1 + 1 = 5 C-H sigma bonds. | 1 |
| Heavy-atom connections: C1-C2, C2=C3, C3-C4, C4≡N is 4 connections, and each has exactly one sigma bond (the extra bonds are pi). | 2 |
| Sigma bonds = 5 + 4 = 9 (and there are 1 + 2 = 3 pi bonds). | 1 |
| Total: 4 marks | 4 |
Answer: 9
Fast method: Sigma bonds = number of atoms - 1 for an acyclic molecule: 5 C/N atoms and 5 H atoms give 10 atoms, so 9.
Sanity check: An acyclic molecule with n atoms has n - 1 sigma bonds; n = 10 gives 9, which agrees.
Example 4 (medium)
Name the alkane (CH3)3C-CH2-CH(CH3)2.
| Step | Marks |
|---|---|
| Longest chain: 5 carbons (a methyl of the tert-butyl end, the quaternary carbon, CH2, CH and a methyl): pentane. | 1 |
| Substituents: two methyls on the quaternary carbon and one on the CH. | 1 |
| Numbering from the tert-butyl end gives locants 2, 2, 4; from the other end 2, 4, 4. The first point of difference favours 2, 2, 4. | 2 |
| Name: 2,2,4-trimethylpentane (three identical branches take the prefix tri). | 1 |
| Total: 5 marks | 5 |
Answer: 2,2,4-trimethylpentane
Fast method: Spot the chain of 5, number from the crowded end, three methyls: 2,2,4-trimethylpentane.
Sanity check: Carbon count: 5 chain + 3 methyl = 8 carbons, which matches the 8 carbons of (CH3)3C-CH2-CH(CH3)2.
Example 5 (hard, multi-step)
Name the compound (CH3)2CH-CH(CH2CH3)-CH2-CH3 and state how many carbon atoms are in its principal chain.
| Step | Marks |
|---|---|
| Search every chain: the longest has 5 carbons (isopropyl CH3, CH, CH, CH2, CH3) and there are several ties of length 5. | 2 |
| Among the 5-carbon chains choose the one with more substituents: a methyl and an ethyl (2 branches), not a single isopropyl. | 2 |
| Lowest locants: methyl at 2, ethyl at 3 (set 2, 3) beats 3, 4. | 1 |
| Name: 3-ethyl-2-methylpentane; principal chain 5 carbons. | 1 |
| Total: 6 marks | 6 |
Answer: 3-ethyl-2-methylpentane, 5 carbons in the principal chain
Fast method: Do not trust the drawing: count every chain, pick more branches, then lowest locants: 2-methyl, 3-ethyl.
Sanity check: Carbons: 5 (chain) + 1 (methyl) + 2 (ethyl) = 8, equal to the 8 carbons of the structure.
Example 6 (medium)
The compound CH3-CH=CH-CH2-CH2OH is named by IUPAC rules. At what position does the double bond start in the name, and what is the locant of the OH group?
| Step | Marks |
|---|---|
| The alcohol is the principal group, so it gets the lowest locant and the chain is numbered from the CH2OH end. | 1 |
| C1 is CH2OH, C2 is CH2, C3 and C4 are the =CH carbons, C5 is CH3. | 1 |
| The double bond begins at C3 and the OH is on C1: pent-3-en-1-ol. | 1 |
| Total: 3 marks | 3 |
Answer: pent-3-en-1-ol: double bond at 3, OH at 1
Fast method: The alcohol carbon is always number 1 here; count from it to the double bond: 3.
Sanity check: Numbering the other way would give the OH locant 5 and the double bond 1, which is higher for the principal group, so it is rejected.
Example 7 (medium)
A compound has the molecular formula C5H9Cl. How many rings plus pi bonds does it contain?
| Step | Marks |
|---|---|
| Treat halogen like hydrogen: equivalent hydrogen count = 9 + 1 = 10. | 1 |
| Saturated C5 needs 2 x 5 + 2 = 12 hydrogens. | 1 |
| Rings plus pi bonds = (12 - 10) / 2 = 1. | 1 |
| Total: 3 marks | 3 |
Answer: 1
Fast method: Degrees of unsaturation = (2C + 2 + N - H - X) / 2 = (12 - 10) / 2 = 1.
Sanity check: One ring or one double bond reduces the hydrogen count by 2 from 12, which matches 10.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Hybridisation rule | steric number = sigma bonds + lone pairs; 4 sp3, 3 sp2, 2 sp | carbon in organic molecules; localised sigma bonds and lone pairs | dimensionless count | Example 1 |
| Bond angles | sp3 109.5, sp2 120, sp 180 | ideal geometry; ring strain or lone pairs change the angles | degrees | none |
| s-character | sp3 25, sp2 33.3, sp 50 | hybrid orbital s-character, equal mixing | percent | Example 2 |
| Sigma and pi in bonds | single 1 sigma; double 1 sigma + 1 pi; triple 1 sigma + 2 pi | not applicable | count | Example 3 |
| Alkane, alkene, alkyne | CnH2n+2, CnH2n, CnH2n-2 | open-chain hydrocarbons with one double bond or triple bond | dimensionless | none |
| Degrees of unsaturation | (2C + 2 + N - H - X) / 2 = rings + pi bonds | neutral compound of C, H, N, halogens; O ignored | count | Example 7 |
| Sigma bonds, acyclic molecule | number of atoms - 1 | acyclic molecule with only single sigma links counted per connection | count | none |
| Homologue gap | successive members differ by CH2 = 14 | members of one homologous series, same functional group | u (g per mol) | none |
| Principal group priority | acid > ester > acid halide > amide > nitrile > aldehyde > ketone > alcohol > amine; then lowest locant to C=C, then C≡C | not applicable | n/a (order) | Example 6 |
Common mistakes and speed
- Counting pi bonds when finding hybridisation, so a carbon with a double bond is called sp3. Why it tempts: A double bond shows two lines, which feels like two bonds; the second line is a pi bond that does not enter the sigma count.
- Listing prefixes in the order of the locant numbers instead of alphabetical order (2-methyl-4-ethylhexane). Why it tempts: Numbers are read left to right, and the lowest-locant rule is fresh in the mind, so the alphabet rule is forgotten.
- Taking the straight-drawn chain as the longest chain. Why it tempts: Condensed formulas are drawn horizontally, and the eye follows the picture, not the connectivity.
- Giving the lowest number to the double bond when a higher-priority group is present. Why it tempts: Alkene names such as but-1-ene are learnt first, so the double bond seems to come first; the functional-group suffix outranks it.
- Calling two compounds homologues because they differ by CH2 although the functional groups differ. Why it tempts: The CH2 difference is the memorised test; the same-functional-group condition is skipped.
Time per question and fast method
Target: about 90 seconds per question.
For hybridisation, count sigma bonds plus lone pairs on each atom. For a name, find the longest chain, rank the principal group, number for the lowest locants, then sort prefixes alphabetically. For a formula, use degrees of unsaturation.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
- In the molecule CH2=CH-C≡C-CH3 the carbon atoms, numbered C1 to C5 from the CH2 end, are hybridised… Verified (T1)
- The IUPAC name of the alkane (CH3)2CH-CH2-CH(CH2CH3)-CH2-CH3 is Verified (T1)
- The IUPAC name of CH2=CH-CO-CH2-CH(OH)-CH3 is Verified (T1)
- In NC-CH2-CHO (3-oxopropanenitrile) the hybridisation states of the nitrogen atom, the CH2 carbon and the… Verified (T1)
- In the molecule CH2=C=CH-CH2-C≡C-CH3, the number of carbon-carbon sigma bonds that join two carbon atoms of… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Tetravalency, promotion and the three hybrid states
In the excited configuration 2s1 2p3 carbon has four unpaired electrons. Mixing one s and three p orbitals gives four equivalent sp3 hybrids pointing to the corners of a tetrahedron (CH4, C2H6 and every carbon with four single bonds). Mixing one s with two p orbitals gives three sp2 hybrids in a plane at 120 degrees, with one unhybridised p orbital perpendicular to the plane that forms the pi bond (C=C, C=O, benzene). Mixing one s with one p gives two sp hybrids at 180 degrees, with two unhybridised p orbitals forming two pi bonds (C≡C, C≡N). Hybridisation is a model for the shape: the count of sigma bonds plus lone pairs is the working rule. In allene, CH2=C=CH2, the central carbon is sp and the two CH2 planes are at right angles because its two p orbitals are perpendicular.
Heteroatoms, s-character and bond properties
Nitrogen and oxygen use the same counting rule with lone pairs included: the nitrogen of a nitrile has one sigma bond and one lone pair, so it is sp; the oxygen of C=O has one sigma bond and two lone pairs, so it is sp2; the nitrogen of an amine has three sigma bonds and one lone pair, so it is sp3. Percentage s-character is 100 divided by the number of hybrid orbitals: 25, 33.3, 50. As s-character rises the C-H and C-C bonds shorten (ethane C-C longest, ethyne C≡C shortest), the carbon becomes more electronegative and the attached hydrogen more acidic. Examiners often hide this inside questions on acidity or dipole moments, so keep the order sp > sp2 > sp3 for electronegativity of carbon.
Classification and homologous series
A carbon is primary (1 degree), secondary (2 degrees) or tertiary (3 degrees) if it is bonded to 1, 2 or 3 other carbon atoms. An alcohol or alkyl halide takes the degree of the carbon bearing the OH or the halogen. Functional groups containing halogens (R-X), oxygen (alcohol, phenol, ether, aldehyde, ketone, acid, ester), nitrogen (amine, amide, nitro, nitrile) and sulphur (thiol, thioether, sulphonic acid) are the ones named in the syllabus. A homologous series is defined by a general formula, one functional group and a CH2 gap; successive members differ by 14 u in molar mass. A degree of unsaturation (rings plus pi bonds) is found from the formula as (2C + 2 + N - H - X) divided by 2 and tells you quickly whether a formula can be an alkane (0), alkene or ring (1) or benzene-like (4).
IUPAC nomenclature: priorities and tie-breakers
Rule order: (1) choose the principal chain as the longest chain that contains the principal group and as many multiple bonds as possible; for alkanes with equal-length candidates choose the one with more substituents; (2) give the lowest locant to the principal group, then to multiple bonds (double before triple on a tie), then to all substituents taken together as a set, then to the substituent cited first in alphabetical order; (3) cite prefixes alphabetically, with multiplying prefixes (di, tri) ignored; (4) isopropyl-type names count the first letter of the full name. Seniority of principal groups for the syllabus: carboxylic acid, ester, acid halide, amide, nitrile, aldehyde, ketone, alcohol, amine, then C=C and C≡C. A senior group beats a double bond for the lowest locant, so HO-CH2-CH=CH-CH3 is but-2-en-1-ol, never but-2-en-4-ol or 4-hydroxybut-2-ene.
What examiners test and the edge cases
Typical items: hybridisation sequence along a conjugated chain; count of sp2 or sp carbons, sigma bonds or pi bonds in a given molecule; shape and bond angle; which pair are homologues; the IUPAC name of a branched or functionalised compound, usually with a numbering trap (lowest locant against alphabetical order) or a chain trap (the longest chain is not drawn straight). Edge cases: a carbon between two double bonds (allene) is sp; the sp3 carbon between two sp2 carbons still counts as sp3; in benzene every carbon is sp2 with a delocalised sextet; when the lowest-locant set ties, alphabetical order decides the direction of numbering. Always count hydrogens on each carbon when counting sigma bonds.
Memory hook
Suppose you are fixing seats in a shared auto-rickshaw: the driver, the people and the bags around one central seat decide how it can be arranged.
- Four people (sigma bonds) around one seat can only be spread to the four corners, as far apart as possible: a tetrahedron, sp3.
- With three people the best spacing is three equal directions in one plane, 120 degrees, and the fourth place is left as a vertical pole to hold: that pole is the pi bond, sp2.
- With two people the only fair spacing is front and back, 180 degrees, and two poles (pi bonds) stand at right angles: sp.
The number of directions (sigma bonds plus lone pairs) fixes the hybridisation, the angle and the s-character; extra pi bonds are poles and never change the count.
Count the directions, not the lines: sigma bonds plus lone pairs give the hybridisation.
Revision card
Try to answer each without looking above.
- State the rule that converts sigma bonds plus lone pairs into sp3, sp2 or sp.
- Give the bond angle and percentage s-character for each of sp3, sp2 and sp.
- Define a homologous series and give the CH2 mass difference.
- List the four moves for naming a branched alkane.
- Write the priority order of principal groups from acid down to alcohol and amine.
- Give the formula for degrees of unsaturation with a halogen present.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 2; fixed: 2
- Report: content/reviews/learn8-bpo-2026-11-21.md
Textbook section references are not attached to this lesson yet.
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 14, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
- NCERT Class 11 Chemistry, Organic Chemistry: Some Basic Principles and Techniques: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.