A screw gauge has a pitch of 0.5 mm and 50 divisions on its circular scale. With the studs touching, the 46th division of the circular scale is against the reference line, the zero of the circular scale not having yet reached it. A wire is clamped: the linear scale shows 2.5 mm and the 32nd circular division is against the reference line. The diameter of the wire, in mm, is
Answer: (B) 2.86 mm Status: Verified (T1). Checked by code and independent solves on 2026-11-20.
- 2.78 mm
- 2.86 mm
- 2.82 mm
- 2.90 mm
Solution
- Least count = pitch/number of divisions = 0.5/50 = 0.01 mm.
- Observed reading = 2.5 + 32 x 0.01 = 2.82 mm.
- Zero reading 46 means the gauge reads 4 divisions short (50 - 46), so the zero error is -0.04 mm. Corrected diameter = 2.82 - (-0.04) = 2.86 mm.
Fast method
Reading 46 near the top of the scale means a negative zero error of 50 - 46 = 4 divisions = -0.04 mm. Subtracting a negative error adds 0.04 mm: 2.82 + 0.04 = 2.86 mm.
Expected time: about 100 seconds. Difficulty: medium.
Topic page: Units, SI system, significant figures and errors