Two rods of the same cross-section are joined end to end. Rod 1 has length 0.20 m and thermal conductivity 300 W/(m K); rod 2 has length 0.15 m and conductivity 50 W/(m K). The free end of rod 1 is held at 100 degrees C and the free end of rod 2 at 0 degrees C. Heat loss from the sides is negligible. In the steady state the temperature of the junction, in degrees C, is
Answer: (D) 81.8 Status: Verified (T1). Checked by code and independent solves on 2026-11-20.
- 18.2
- 50.0
- 66.7
- 81.8
Solution
- In steady state the same heat current flows through both rods. Thermal resistance per unit area is L/k: R1 = 0.20/300 = 6.67 x 10⁻4 and R2 = 0.15/50 = 3.0 x 10⁻3 (m² K/W).
- The temperature drop is proportional to the resistance: drop across rod 1 = 100 x R1/(R1 + R2) = 18.2 degrees C.
- Junction temperature = 100 - 18.2 = 81.8 degrees C.
Fast method
The poor conductor (rod 2) takes most of the drop, so the junction stays near the hot end: only 18 percent of the 100 degrees C falls across rod 1. Answer 81.8.
Expected time: about 100 seconds. Difficulty: medium.
Topic page: Heat, calorimetry and heat transfer