EngineeringRise

Dimensional Analysis and Its Applications: JEE Main

Reviewed Last updated 2026-11-21. Syllabus topic: Dimensional analysis and its applications.

In short. The dimension of a quantity is its expression in powers of base quantities, such as force = M L T⁻2. Terms added or equated must match, which lets you check formulas, convert units and derive relations up to a dimensionless constant.

  • Principle of homogeneity: every term of a valid physical equation has the same dimensions.
  • Dimensions check, convert and derive; they cannot give dimensionless constants such as 1/2 or 2 pi, and cannot handle sums of functions.
  • Angles, strain, refractive index and ratios are dimensionless; arguments of sin, log and exponential must be dimensionless.
  • Unit conversion: n1 u1 = n2 u2, so n2 = n1 (M1/M2)ᵃ (L1/L2)ᵇ (T1/T2)ᶜ for dimensions Mᵃ Lᵇ Tᶜ.

Syllabus line: Units and Measurements Units of measurements, System of units, SI Units, fundamental and derived units, least count, significant figures, Errors in measurements. Dimensions of Physics quantities, dimensional analysis and its applications. (NTA JEE (Main) 2026 syllabus, Physics, Unit 1 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Units, SI system, significant figures and errors: Dimensions are built on the base quantities and derived units. Read this first if the SI base units are not firm.
  • Newton laws and force (lesson planned): Most dimensional formulas start from F = m a. Read this first if the unit of force is not clear.
  • Work, energy and power (lesson planned): Energy, work and power are the common targets of dimensional questions.

Related topics

The concept step by step

  1. Dimensions and dimensional formulas

    The dimensions of a physical quantity are the powers to which the base quantities are raised to represent it. In mechanics the base quantities are mass [M], length [L] and time [T]. Velocity has dimensions [L T⁻1], acceleration [L T⁻2], force [M L T⁻2], work and energy [M L² T⁻2], and pressure [M L⁻1 T⁻2]. Writing a quantity as Mᵃ Lᵇ Tᶜ is its dimensional formula. Numbers, angles, strain and ratios of like quantities are dimensionless.

  2. Principle of homogeneity

    In a correct physical equation every term has the same dimensions: you cannot add a distance to a time, and both sides of an equation must match. The argument of a trigonometric, logarithmic or exponential function must be dimensionless, so in y = A sin(k x - w t) the product k x is dimensionless and k has dimensions L⁻1. Plus and minus signs do not change dimensions: v² = u² + 2 a s has three terms of dimensions L² T⁻2.

  3. Checking a formula

    To check a relation, write the dimensions of each side and compare. If they differ the formula is wrong. If they agree, the formula may still be wrong, because a numerical factor such as 1/2 or 2 pi cannot be detected, and because two different physical quantities can share dimensions (work and torque, or frequency and angular frequency). So dimensional agreement is a necessary test, not a proof.

  4. Deriving a relation by dimensions

    If a quantity depends on a few others as a product of powers, equate the dimensions of both sides. For the speed v of a wave on a string depending on tension F and mass per length mu, put v = k Fᵃ muᵇ: matching M gives a + b = 0, matching T gives -2a = -1, and matching L gives a - b = 1, so a = 1/2, b = -1/2 and v = k sqrt(F/mu). The constant k must come from theory or experiment. The method needs as many equations (usually three) as unknown powers.

  5. Converting units using dimensions

    A physical quantity is the same whatever the unit, so n1 u1 = n2 u2. If the dimensions are Mᵃ Lᵇ Tᶜ, then n2 = n1 (M1/M2)ᵃ (L1/L2)ᵇ (T1/T2)ᶜ where M1, L1, T1 are the old units and M2, L2, T2 the new ones. A larger unit gives a smaller number. For example, 1 J = 10⁷ erg, because 1 kg = 10³ g and 1 m² = 10⁴ cm² give 10³ x 10⁴ = 10⁷ for [M L² T⁻2].

  6. Limits and choosing different base quantities

    Dimensional analysis cannot give dimensionless constants, cannot handle a relation with a sum or difference of different functions such as s = u t + 1/2 a t² as a derivation, and fails if the quantity depends on more variables than there are base quantities, or on a dimensionless variable such as an angle. It can also be done with other sets of base quantities, for example velocity, density and area: the same equations are then solved for new powers.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

Find the dimensions of pressure and state the exponent of time in them.

Marks-style solution of example 1
StepMarks
Pressure = force/area.1
[F] = M L T⁻2 and [A] = L².1
[P] = M L T⁻2/L² = M L⁻1 T⁻2; the exponent of time is -2.1
Total: 3 marks3

Answer: M L⁻1 T⁻2; time exponent -2

Fast method: Pressure has the same dimensions as energy per unit volume: (M L² T⁻2)/L³.

Sanity check: Units: pascal = N/m² = kg m⁻1 s⁻2, which matches. The same dimensions are shared by stress and modulus of elasticity.

Example 2 (easy)

Check whether v² = u² + 2 a s is dimensionally consistent, by finding the dimensions of the term 2 a s. Give the exponent of length in it.

Marks-style solution of example 2
StepMarks
[v²] = (L T⁻1)² = L² T⁻2, and [u²] is the same.1
[a s] = (L T⁻2)(L) = L² T⁻2; the number 2 is dimensionless.1
All three terms have dimensions L² T⁻2, so the equation is consistent; the exponent of length is 2.1
Total: 3 marks3

Answer: consistent; length exponent 2

Fast method: Compare each term: L² T⁻2 for v², u² and a s.

Sanity check: Units: m²/s² on every term. Consistency does not prove the factor 2 is right; that needs the derivation.

Example 3 (medium)

Find the dimensions of Planck constant h from E = h f, where E is energy and f is frequency. Give the sum of the exponents of M, L and T.

Marks-style solution of example 3
StepMarks
[E] = M L² T⁻2 and [f] = T⁻1.1
[h] = [E]/[f] = M L² T⁻2 x T = M L² T⁻1.1
The exponents are 1, 2 and -1, so the sum is 2.1
Total: 3 marks3

Answer: M L² T⁻1, sum of exponents 2

Fast method: Energy times time (action) is the dimension of h, and the same as angular momentum.

Sanity check: Units: J s = kg m² s⁻1. The same dimensions as angular momentum is why the Bohr quantisation condition mvr = n h/(2 pi) is consistent.

Example 4 (medium)

A student writes the kinetic energy of a body of mass 2.0 kg and speed 3.0 m/s as m v², arguing it is dimensionally correct. Find the correct value in joule.

Marks-style solution of example 4
StepMarks
Dimensions of m v² are M L² T⁻2, those of energy, so the student passes the dimensional test.1
The correct formula is (1/2) m v²; dimensions cannot show the factor 1/2.1
KE = 0.5 x 2.0 x 3.0² = 9.0 J, not 18 J.1
Total: 3 marks3

Answer: 9.0 J

Fast method: Dimensional agreement does not fix numerical factors: use the derivation, 1/2 m v².

Sanity check: Units: kg m²/s² = J. A moving 2 kg mass at 3 m/s has energy of a few joule, so 9 J is reasonable.

Typical trap: Believing that a dimensionally correct formula is correct. The factor 1/2 is invisible to the method.

Example 5 (medium)

The speed of a transverse wave on a string depends on the tension F and the mass per unit length mu. Derive v = k Fᵃ muᵇ, and find v for F = 100 N and mu = 0.010 kg/m with k = 1.

Marks-style solution of example 5
StepMarks
Dimensions: [v] = L T⁻1, [F] = M L T⁻2, [mu] = M L⁻1.1
Match M: a + b = 0; match T: -2a = -1; so a = 1/2 and b = -1/2. Length check: a - b = 1.2
v = sqrt(F/mu) = sqrt(100/0.010) = 100 m/s.1
Total: 4 marks4

Answer: v = k sqrt(F/mu); 100 m/s

Fast method: Newton per (kg per metre) is metre squared per second squared, so v = sqrt(F/mu).

Sanity check: Units: sqrt(N/(kg/m)) = sqrt(m²/s²) = m/s. A taut string with a tension of 100 N and light mass density carries waves of about 100 m/s, which is the right order. Raising F raises v, as expected.

Example 6 (hard, multi-step)

A pendulum of length 0.64 m has a period of 1.6 s. Using the fact that the period depends only on the length l, the mass m and the gravitational acceleration g, find the period for a bob of double the mass on a pendulum of length 1.44 m at the same place.

Marks-style solution of example 6
StepMarks
Let T = k lᵃ mᵇ gᶜ with dimensions T = Lᵃ Mᵇ Lᶜ T^(-2c).1
Matching M gives b = 0; matching T gives -2c = 1, so c = -1/2; matching L gives a + c = 0, so a = 1/2. T = k sqrt(l/g), independent of the mass.2
Same place means the same g and k, so T is proportional to sqrt(l): T2 = 1.6 x sqrt(1.44/0.64) = 1.6 x 1.5.2
T2 = 2.4 s.1
Total: 6 marks6

Answer: 2.4 s

Fast method: T proportional to sqrt(l): ratio of lengths 1.44/0.64 = 2.25, square root 1.5, so 1.6 x 1.5 = 2.4 s. The mass is irrelevant.

Sanity check: Units: seconds. A longer pendulum has a longer period (2.4 s is greater than 1.6 s). Check with k: T = 2 pi sqrt(l/g) gives 1.6 s for l = 0.64 m if g = 9.87 m/s², which is consistent with the order of g.

Example 7 (hard)

Atmospheric pressure is 1.013 x 10⁵ Pa. Express it in the CGS unit dyne/cm², using dimensions to convert. Give the result in units of 10⁶ dyne/cm².

Marks-style solution of example 7
StepMarks
[P] = M L⁻1 T⁻2, so n2 = n1 (M1/M2)¹ (L1/L2)⁻1 (T1/T2)⁻2.1
Old units kg, m, s; new units g, cm, s: M1/M2 = 1000, L1/L2 = 100, T1/T2 = 1.1
n2 = 1.013 x 10⁵ x 1000 x 100⁻1 = 1.013 x 10⁵ x 10 = 1.013 x 10⁶.2
Total: 4 marks4

Answer: 1.013 x 10⁶ dyne/cm²

Fast method: One pascal equals 10 dyne/cm² (10⁵ dyne/10⁴ cm²): multiply by 10.

Sanity check: Units: dyne/cm² is a smaller unit than pascal, so the number must be larger: 10⁶ against 10⁵, which is the case.

Formulas and units

Formula and unit box for Dimensional analysis and its applications
ResultFormulaValid whenUnits or noteWorked example
Velocity, acceleration[L T⁻1], [L T⁻2]not applicablem/s (m/s²)Example 2
Force, momentum[M L T⁻2], [M L T⁻1]not applicableN (kg m/s)Example 1
Work, energy, torque[M L² T⁻2]not applicableJ (N m)Example 3
Power[M L² T⁻3]not applicableWnone
Pressure, stress, modulus[M L⁻1 T⁻2]not applicablePaExample 1
Surface tension, spring constant[M T⁻2]not applicableN/mnone
Viscosity, Planck constant, G[M L⁻1 T⁻1], [M L² T⁻1], [M⁻1 L³ T⁻2]not applicablePa s (J s, N m²/kg²)Example 3
Homogeneityevery term in an equation has equal dimensionsnot applicablen/a (rule)Example 2
Unit conversionn2 = n1 (M1/M2)ᵃ (L1/L2)ᵇ (T1/T2)ᶜconverting one quantity of dimensions Mᵃ Lᵇ Tᶜ between two unit systemspure numberExample 7

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Treating a dimensionally correct formula as a correct formula. Why it tempts: The check is quick and reassuring, but factors such as 1/2 or 2 pi do not change the dimensions, so a wrong option can pass the test.
  • Inverting the unit ratio in a conversion. Why it tempts: Both n2 = n1 (old/new) and its inverse look plausible; the test is that a larger unit must give a smaller number.
  • Taking the dimensions of the argument of sine or exponential as non-zero. Why it tempts: The symbols look like ordinary quantities; but the argument must be dimensionless, which fixes the dimensions of k or b.
  • Mistaking the dimensions of surface tension for those of force. Why it tempts: Surface tension is force per unit length, so it carries a unit of N/m (M T⁻2), not N.
  • Assuming quantities with the same dimensions are the same physical quantity. Why it tempts: Work and torque both have M L² T⁻2, yet they are different physical quantities, and the formulas using them differ.

Time per question and fast method

Target: about 80 seconds per question.

Memorise the table of dimensional formulas and write each quantity as an exponent triple (M, L, T). To check a formula, add and subtract triples. To derive, set up three linear equations for the exponents and solve by elimination. For unit conversion, use the old over new unit ratio raised to the dimensional exponent and sanity-check whether the number should rise or fall.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. The dimensional formula of momentum has exponents of M, L and T that add up to
Show the answer

Answer: A: 1. Momentum is M L T⁻1; the exponents 1, 1, -1 add to 1.

Question 2. The speed of a wave on a string is v = sqrt(F/mu). For F = 36 N and mu = 0.040 kg/m, in m/s it is
Show the answer

Answer: B: 30 m/s. v = sqrt(36/0.040) = sqrt(900) = 30 m/s.

Question 3. Using dimensions, 1 joule equals how many erg, in units of 10⁷?
Show the answer

Answer: B: 1. 1 J = 1 kg m² s⁻2 = 1000 g x 10⁴ cm² s⁻2 = 10⁷ erg.

Question 4. Which pair has the same dimensions?
Show the answer

Answer: D: Work and torque. Both work and torque are M L² T⁻2, although they are different physical quantities.

Question 5. Which of these can dimensional analysis not give?
Show the answer

Answer: C: The numerical constant 2 pi in a pendulum formula. Dimensionless constants are beyond the method; the other three are what it does.

Question 6. In y = A sin(k x - w t), with x in metres, the dimensions of k are
Show the answer

Answer: A: L⁻1. The argument of sine is dimensionless, so k x has no dimension and k has dimensions L⁻1.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Dimensions of common quantities

Learn these as one table. Velocity L T⁻1; acceleration L T⁻2; momentum and impulse M L T⁻1; force M L T⁻2; work, energy, torque M L² T⁻2; power M L² T⁻3; pressure, stress, modulus of elasticity, energy density M L⁻1 T⁻2; surface tension and spring constant M T⁻2; viscosity coefficient M L⁻1 T⁻1; angular momentum and Planck constant M L² T⁻1; frequency and angular velocity T⁻1; gravitational constant M⁻1 L³ T⁻2; charge A T; potential M L² T⁻3 A⁻1; resistance M L² T⁻3 A⁻2; capacitance M⁻1 L⁻2 T⁴ A²; inductance M L² T⁻2 A⁻2; magnetic field M T⁻2 A⁻1. Quantities that share dimensions: work and torque; stress and pressure; frequency and angular velocity; strain and refractive index (dimensionless).

Homogeneity and dimensionless arguments

Every additive term in an equation has identical dimensions. In van der Waals equation (P + a/V²)(V - b) = R T, a/V² has the dimensions of pressure, so a is P V² = M L⁵ T⁻2, and b has the dimensions of volume, L³. In y = A e^(-b t), the product b t is dimensionless, so b has dimensions T⁻1. A ratio such as a/b can then be recognised: a/b = P V which is energy. A pure ratio (refractive index, strain, a ratio of two lengths) has the same value in every unit system, so it is the same in SI and CGS. The dimensions of an unknown constant in an equation are usually found by applying homogeneity, as done for a, b and the exponent b t above.

Deriving a formula: method and worked pattern

Step 1: list the variables the quantity could depend on. Step 2: write the relation as a product of powers with an unknown constant. Step 3: write the dimensions of every variable in M, L, T. Step 4: equate the exponent of each base quantity on both sides to obtain linear equations, then solve. Step 5: state the result up to the constant. Example: the time period of a liquid drop of density rho, radius r and surface tension S gives T proportional to sqrt(rho r³/S). A good habit is to test the final formula dimensionally and with a limiting case before moving on. If the number of unknown powers exceeds the number of independent base quantities, the powers are not fixed uniquely and extra physical input is needed.

Unit conversions and systems of units

Systems met in problems: SI (m, kg, s), CGS (cm, g, s), and invented systems where base units are unusual. The conversion n2 = n1 (M1/M2)ᵃ (L1/L2)ᵇ (T1/T2)ᶜ has the unit ratio old over new; the number goes up when the unit goes down. Common factors: 1 N = 10⁵ dyne, 1 J = 10⁷ erg, 1 Pa = 10 dyne/cm², 1 g/cm³ = 1000 kg/m³. Using dimensions it is easy to convert even a quantity whose unit you have not memorised, as the power of each base unit comes from its dimensional formula. If the new unit of length is L2 metres, the number for any area is divided by L2 squared and the number for any volume by L2 cubed.

Limitations of dimensional analysis

It cannot determine dimensionless constants (1/2, 2, pi, 2 pi), cannot distinguish quantities with the same dimensions (torque versus energy; frequency versus angular frequency), fails when a variable is a trigonometric, exponential or logarithmic function of a dimensional variable, and cannot decide between correct and incorrect relations that happen to match, such as KE = m v² and KE = (1/2) m v². It also gives no way of deriving relations with more than three independent variables in mechanics, or for sums such as s = u t + (1/2) a t², which can only be checked. A dimensionally wrong formula is certainly wrong, but a dimensionally right one may still be wrong.

What examiners test

Items: dimensions of a derived constant or a combination (a/b in the van der Waals equation, L/R, the ratio E/B); which of four formulas is dimensionally consistent; finding exponents in a derived relation (pendulum, drop, wave on a string, Planck length); conversion between systems with new base units; ratios of quantities with equal dimensions; and statements about what dimensional analysis can and cannot do. Time is saved by memorising dimensional formulas in a table, writing the dimensions as exponent triples (M, L, T), and solving the linear equations on paper. Check the final exponents against the stem: the left side must reduce exactly to the dimensions of the asked quantity.

Memory hook

Suppose an autorickshaw fare is 15 rupees for every kilometre plus 2 rupees for every minute of waiting, and you are asked to find the total fare.

  1. The distance part is 15 rupees per kilometre times a number of kilometres, which gives rupees.
  2. The waiting part is 2 rupees per minute times a number of minutes, which also gives rupees; only because both parts are in rupees can they be added.
  3. If someone wrote the fare as 15 per kilometre times the minutes waited, the unit would be rupees minutes per kilometre, which cannot be added to rupees, so the formula is wrong at once.

Terms that are added must have the same units, which is the principle of homogeneity, and a mismatch in dimensions exposes a wrong formula before any arithmetic.

Only like can be added to like: check the dimensions of every term first.

Revision card

Try to answer each without looking above.

  1. State the principle of homogeneity and one example of its use.
  2. Write the dimensional formulas of force, energy, pressure, surface tension and Planck constant.
  3. Describe the steps for deriving a relation by dimensions and name one limit of the method.
  4. Why must the argument of a sine or an exponential be dimensionless?
  5. Convert 1 J to erg using dimensions, and say whether the number rises or falls when the unit becomes smaller.
  6. Name two pairs of physically different quantities that share the same dimensions.

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 3; fixed: 3
  • Report: content/reviews/learn8-uom-2026-11-21.md

Textbook references

  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 1: Units and Measurement, 1.4 Dimensions of Physical Quantities (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 1: Units and Measurement, 1.5 Dimensional Formulae and Dimensional Equations (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 1: Units and Measurement, 1.6.1 Checking the Dimensional Consistency of Equations (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 1: Units and Measurement, 1.6.2 Deducing Relation among the Physical Quantities (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 1 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
  • Standard results of school-level dimensional analysis; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.