EngineeringRise

Wave Optics: Interference and Diffraction, JEE Main

Reviewed Last updated 2026-11-20. Syllabus topic: Wave optics: interference and diffraction.

In short. Wave optics treats light as a wave. Huygens principle gives the laws of reflection and refraction. In Young experiment bright fringes occur where the path difference is n lambda, with fringe width beta = lambda D/d. A single slit gives a central maximum of width 2 lambda D/a. The key skill is counting path differences.

  • Huygens principle: every point on a wavefront is a source of secondary wavelets; the new wavefront is their envelope. It derives reflection and refraction, with n = c/v and lambda_medium = lambda/n.
  • Young experiment: path difference d y/D. Bright fringes at y = n lambda D/d, dark at (n + 1/2) lambda D/d; fringe width beta = lambda D/d, and beta falls by a factor n in a medium.
  • Coherent sources have a constant phase difference; I = I1 + I2 + 2 square root of (I1 I2) cos(phi), so Imax/Imin = ((a1 + a2)/(a1 - a2))².
  • A sheet of thickness t and index n over one slit shifts the pattern by (n - 1) t D/d, toward the covered slit.
  • Single slit of width a: minima at a sin(theta) = n lambda, central maximum width 2 lambda D/a, twice as wide as the other maxima.

Syllabus line: Optics Reflection of light, spherical mirrors, mirror formula. Refraction of light at plane and spherical surfaces, thin lens formula and lens maker formula, total internal reflection and its applications, magnification, power of a lens, combination of thin lenses in contact, refraction of light through a prism, microscope and astronomical telescope (reflecting and refracting ) and their magnifying powers. Wave optics: wavefront and Huygens `Principle, laws of reflection and refraction using Huygens principle. Interference: Young's double-slit experiment and expression for fringe width, coherent sources and sustained interference of light. Diffraction due to a single slit, width of central maximum. Polarization: plane-polarized light, Brewster's law, uses of plane- polarized light and Polaroid. (NTA JEE (Main) 2026 syllabus, Physics, Unit 16 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Reflection, mirrors and refraction: Huygens derivations reproduce Snell law and the speed c/n. Read this first if refractive index and wavelength in a medium are unclear.
  • Oscillations and waves (lesson planned): Path difference, phase difference and superposition are used throughout. Read this first if superposition of waves is unclear.
  • Trigonometric functions and identities: Intensity formulae use cos(phi) and small angle approximations. Read this first if sin and tan of small angles are unclear.

Related topics

The concept step by step

  1. Wavefronts and Huygens principle

    A wavefront is a surface of constant phase. Huygens principle states that every point on a wavefront acts as a source of secondary spherical wavelets, and the new wavefront after a time t is the surface tangent to all these wavelets. A point source gives spherical wavefronts, a distant source gives plane wavefronts. Rays are perpendicular to wavefronts, so a plane wavefront corresponds to parallel rays.

  2. Reflection and refraction from Huygens principle

    Constructing wavelets when a plane wavefront meets a plane mirror gives angle of incidence equal to angle of reflection. For refraction, wavelets travel with speed v1 in medium 1 and v2 in medium 2 during the same time, so sin i/sin r = v1/v2 = n2/n1, which is Snell law. The frequency does not change, so the wavelength becomes lambda/n, and the light is slower in a denser medium. This also shows that the wave model predicts a speed lower in glass.

  3. Coherence and superposition

    Two sources are coherent if the phase difference between them is constant in time. Only then does a steady, sustained interference pattern form. Independent light sources are not coherent, because atoms emit with random phase, so the two beams in Young experiment are derived from the same source. For two waves of intensities I1 and I2 with phase difference phi, I = I1 + I2 + 2 square root of (I1 I2) cos(phi). Maximum at phi = 2 n pi (path difference n lambda) and minimum at phi = (2n + 1) pi.

  4. Young double-slit experiment and fringe width

    Two slits a distance d apart are lit coherently and the screen is a distance D away, with D much greater than d. The path difference at a point y from the central line is d y/D. Bright fringes need d y/D = n lambda, so y_n = n lambda D/d. Dark fringes are at (n + 1/2) lambda D/d. The fringe width, the spacing between adjacent bright fringes, is beta = lambda D/d. If the whole set-up is immersed in a liquid of index n, lambda becomes lambda/n and beta decreases by the factor n.

  5. Single-slit diffraction

    When a plane wave passes a slit of width a, light bends into the geometrical shadow. The condition for the n-th minimum is a sin(theta) = n lambda, with n = 1, 2, 3. The central maximum lies between the first minima on either side, so its angular width is 2 lambda/a and its linear width on a screen at distance D is 2 lambda D/a. All other maxima are about half as wide and much weaker. A narrower slit gives a wider central maximum; this is the opposite of what a ray picture predicts.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

In a Young double-slit experiment the slits are 0.50 mm apart, the screen is 1.0 m away and the wavelength is 500 nm. Find the fringe width in mm.

Marks-style solution of example 1
StepMarks
beta = lambda D/d.1
beta = (500 x 10⁻9)(1.0)/(0.50 x 10⁻3).1
beta = 1.0 x 10⁻3 m = 1.0 mm.1
Total: 3 marks3

Answer: 1.0 mm

Fast method: D/d = 2000, so beta = 2000 x 500 nm = 1,000,000 nm = 1 mm.

Sanity check: Units: m. A fringe width of about a millimetre is the typical visible scale for such a set-up, with d about a thousand wavelengths.

Example 2 (easy)

Light of wavelength 600 nm in air enters glass of refractive index 1.5. Find its wavelength in the glass, in nm, and its speed in the glass in 10⁸ m/s (take c = 3.0 x 10⁸ m/s).

Marks-style solution of example 2
StepMarks
Frequency is unchanged across the boundary.1
lambda_glass = lambda/n = 600/1.5 = 400 nm.1
Speed v = c/n = 3.0 x 10⁸/1.5 = 2.0 x 10⁸ m/s. Wavelength = 400 nm.1
Total: 3 marks3

Answer: 400 nm and 2.0 x 10⁸ m/s

Fast method: Divide both by 1.5: 600/1.5 = 400 nm and 3/1.5 = 2 (in 10⁸ m/s).

Sanity check: Units: nm and m/s. Both fall by the factor 1.5; the frequency c/lambda = 5.0 x 10¹4 Hz is the same as v/lambda_glass.

Example 3 (medium)

In a Young experiment with lambda = 600 nm, D = 1.2 m and d = 0.36 mm, find the distance of the fifth bright fringe from the central maximum, in mm.

Marks-style solution of example 3
StepMarks
y_n = n lambda D/d with n = 5.1
y₅ = 5 x (600 x 10⁻9)(1.2)/(0.36 x 10⁻3).1
y₅ = 5 x 2.0 x 10⁻3 m = 1.0 x 10⁻2 m = 10 mm.1
Total: 3 marks3

Answer: 10 mm

Fast method: beta = 600e-9 x 1.2/0.36e-3 = 2 mm, so y₅ = 5 x 2 = 10 mm.

Sanity check: Units: m converted to mm. y is much smaller than D = 1200 mm, so the small-angle approximation holds.

Example 4 (medium)

Two coherent sources have intensities in the ratio 9 : 1. Find Imax/Imin for their interference pattern.

Marks-style solution of example 4
StepMarks
Amplitude ratio a1/a2 = square root of 9 = 3.1
Imax is proportional to (a1 + a2)² = (3 + 1)² = 16.1
Imin is proportional to (a1 - a2)² = (3 - 1)² = 4.1
Imax/Imin = 16/4 = 4.1
Total: 4 marks4

Answer: 4

Fast method: Imax/Imin = ((3 + 1)/(3 - 1))² = 2² = 4.

Sanity check: No units. Equal intensities would give Imin = 0 and an infinite ratio, so a finite value for unequal intensities is expected. Check with intensities 9 and 1: Imax = 9 + 1 + 6 = 16 and Imin = 9 + 1 - 6 = 4, ratio 4.

Example 5 (medium)

A Young experiment in air gives a fringe width of 1.2 mm. The whole apparatus is immersed in water (n = 4/3). Find the new fringe width in mm.

Marks-style solution of example 5
StepMarks
In water the wavelength becomes lambda/n.1
beta = lambda D/d scales with lambda, so beta_water = beta_air/n.1
beta_water = 1.2/(4/3) = 0.90 mm.1
Total: 3 marks3

Answer: 0.90 mm

Fast method: Multiply by 3/4: 1.2 x 0.75 = 0.9 mm.

Sanity check: Units: mm. The fringes must become closer in a denser medium (0.9 mm is less than 1.2 mm) because the wavelength is shorter.

Typical trap: Leaving the fringe width unchanged because the slits and the screen are the same. The wavelength in water is shorter, so the fringes shrink by the factor n.

Example 6 (hard, multi-step)

In a Young experiment d = 0.60 mm and D = 1.5 m with light of wavelength 600 nm. A thin transparent sheet of thickness 5.0 micrometre and refractive index 1.6 is placed over one slit. Find the shift of the central maximum in mm.

Marks-style solution of example 6
StepMarks
Extra optical path = (n - 1) t = 0.6 x 5.0 micrometre = 3.0 micrometre.1
Number of fringes shifted = 3.0 micrometre/0.6 micrometre = 5.1
Fringe width = lambda D/d = (600 x 10⁻9)(1.5)/(0.60 x 10⁻3) = 1.5 mm.2
Shift = 5 x 1.5 mm = 7.5 mm, towards the covered slit.1
Total: 5 marks5

Answer: 7.5 mm

Fast method: Shift = (n - 1) t D/d = 0.6 x 5e-6 x 1.5/0.6e-3 = 7.5 mm directly.

Sanity check: Units: mm. Shift is an integer number (5) of fringes, so the pattern looks the same except for the displacement, with 7.5 mm much less than D.

Example 7 (hard, multi-step)

Slits of separation d = 0.50 mm and each of width a = 0.10 mm are lit with light of wavelength 500 nm and the screen is 2.0 m away. How many bright interference fringes lie within the central diffraction maximum?

Marks-style solution of example 7
StepMarks
Width of the central diffraction maximum = 2 lambda D/a = 2 x (500 x 10⁻9)(2.0)/(0.10 x 10⁻3) = 20 mm, so its half width is 10 mm.2
Fringe width beta = lambda D/d = (500 x 10⁻9)(2.0)/(0.50 x 10⁻3) = 2.0 mm.1
Bright fringes at 0, +2, +4, +6, +8 mm and the same on the other side; the fringe at 10 mm falls on the first diffraction minimum and is missing (d/a = 5).2
Number of bright fringes = 2 x 4 + 1 = 9.1
Total: 6 marks6

Answer: 9 bright fringes

Fast method: d/a = 5, so the fifth order is missing; fringes of order 0 to 4 on each side give 2 x 4 + 1 = 9.

Sanity check: No units. The count 9 equals 2 d/a - 1 = 9, which agrees with the missing-order argument, and equals 20 mm / 2 mm - 1 = 9.

Formulas and units

Formula and unit box for Wave optics: interference and diffraction
ResultFormulaValid whenUnits or noteWorked example
Speed and wavelength in a mediumv = c/n; lambda_medium = lambda/nlight entering a medium of index n; frequency stays samem/s (m)Example 2
Snell law from Huygenssin i/sin r = v1/v2 = n2/n1wavefront refraction at plane boundary, Huygens constructiondimensionlessnone
Resultant intensityI = I1 + I2 + 2 square root of (I1 I2) cos(phi)two coherent sources of same frequency; phi is phase differenceW/m²none
Phase and path differencephi = (2 pi/lambda) x path differenceany two waves of wavelength lambda in the same mediumradiannone
Intensity ratioImax/Imin = ((a1 + a2)/(a1 - a2))²two coherent sources with amplitudes a1 and a2dimensionlessExample 4
Young: bright fringesy_n = n lambda D/dYoung double slit, small angles, D much larger than d; n = 0, 1, 2...mExample 3
Young: dark fringesy = (n - 1/2) lambda D/dYoung double slit, small angles, D much larger than d; n = 1, 2, 3...mnone
Fringe widthbeta = lambda D/dYoung double slit, small angles; fringes equally spacedmExample 1
Shift due to a thin sheetDelta y = (n - 1) t D/dthin sheet over one slit; central fringe shifts toward the sheetmExample 6
Single-slit minimaa sin(theta) = n lambdasingle slit width a; minima only, n = 1, 2, 3...; small anglesmnone
Width of the central maximum2 lambda D/asingle slit; distance between first minima on screen, small anglesmExample 7

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Using lambda d/D as the fringe width. Why it tempts: The three symbols are easy to permute; check the limit that a larger screen distance spreads the fringes, so D is in the numerator.
  • Not changing the wavelength when the experiment is immersed in a liquid. Why it tempts: The geometry is unchanged, so students think nothing changes; the wavelength falls to lambda/n, so beta falls.
  • Using n t instead of (n - 1) t for the shift due to a thin sheet. Why it tempts: The optical path in the sheet is n t, but the sheet replaces air of thickness t, so the extra path is (n - 1) t.
  • Taking the width of the central maximum in single-slit diffraction as lambda D/a. Why it tempts: That is the half width, the distance to the first minimum; the central maximum extends on both sides.
  • Adding intensities of two coherent sources directly. Why it tempts: For incoherent sources I = I1 + I2 is right; for coherent sources amplitudes add and the cross term matters.
  • Taking the least common multiple of the two wavelengths for coincident fringes. Why it tempts: The condition is n1 lambda1 = n2 lambda2, so the orders must be the smallest integers in the inverse ratio.

Time per question and fast method

Target: about 100 seconds per question.

Compute beta = lambda D/d first, in mm, using D/d as a single ratio. Express shifts and positions as numbers of beta. Immersion divides beta and the single-slit width by n. For intensity ratios convert to amplitudes by square root.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. In Young experiment lambda = 500 nm, D = 2 m and d = 1 mm. What is the fringe width in mm?
Show the answer

Answer: B: 1 mm. beta = 500e-9 x 2/1e-3 = 1e-3 m = 1 mm.

Question 2. Two waves have a path difference of lambda/4. What is the phase difference in radian?
Show the answer

Answer: A: pi/2. phi = 2 pi/lambda x lambda/4 = pi/2.

Question 3. Light passes through a single slit of width a = 2 lambda. At what angle, in degrees, is the first minimum?
Show the answer

Answer: C: 30 degrees. a sin(theta) = lambda gives sin(theta) = 1/2, so theta = 30 degrees.

Question 4. Two slits give equal intensity I0 each. What is the maximum intensity of the pattern in units of I0?
Show the answer

Answer: D: 4. Imax = 4 I0 when the amplitudes add: (a + a)² = 4 a².

Question 5. Why are two separate sodium lamps unable to give a sustained interference pattern?
Show the answer

Answer: A: They are not coherent: their phase difference changes randomly. Independent atomic emitters have a randomly varying phase, so no steady phase difference exists.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Huygens principle and its results

Huygens construction gives rectilinear propagation, reflection and refraction. Wavelets in the second medium of index n2 have radius v2 t = (c/n2) t. From the geometry, n1 sin i = n2 sin r and the angles of incidence and reflection are equal. After refraction the frequency is unchanged, the speed is c/n and the wavelength lambda/n. A prism or a lens changes the shape of the wavefront: a convex lens converts a plane wavefront into a converging spherical one. Wavefront from a distant source (the Sun) is plane. The method fails to explain the absence of a backward wave, a known limit that the syllabus does not test. Remember that a wavefront is a surface of constant phase and rays are normal to it.

Interference: conditions and intensity

Constant phase difference (coherence), nearly equal amplitudes for good contrast, and the same polarisation are required for sustained interference. The intensity is I = I1 + I2 + 2 square root of (I1 I2) cos(phi). If I1 = I2 = I0 then I = 4 I0 cos²(phi/2), so Imax = 4 I0, Imin = 0 and the average intensity is 2 I0 (energy is redistributed, not created). In general Imax/Imin = ((a1 + a2)/(a1 - a2))² = (square root of I1 + square root of I2)²/(square root of I1 - square root of I2)². If the intensity ratio of the slits is 9, the amplitude ratio is 3 and Imax/Imin = 16/4 = 4. The phase difference is phi = 2 pi/lambda times the path difference.

Young experiment: fringe positions, shift and variations

Path difference at height y is approximately d y/D, valid for y much smaller than D. Bright: y = n lambda D/d. Dark: y = (n - 1/2) lambda D/d for n = 1, 2, 3. Fringe width beta = lambda D/d is the same for all fringes. If one slit is covered by a thin transparent sheet of thickness t and index n, the optical path increases by (n - 1) t, and the central bright fringe moves toward the covered slit by Delta y = (n - 1) t D/d = beta (n - 1) t/lambda. White light gives a central white fringe with coloured fringes on either side because beta depends on lambda. The set-up in a liquid of index n has beta/n. Increasing d or decreasing D narrows the fringes. If the slit separation is such that d is comparable to D, the small-angle approximation fails; at this level it is used.

Coincidence and counting problems

When two wavelengths lambda1 and lambda2 are used, bright fringes coincide where n1 lambda1 = n2 lambda2. With lambda1 = 600 nm and lambda2 = 450 nm, n1/n2 = 3/4, so the first coincidence is at n1 = 3 and n2 = 4. The number of fringes in a given length is the length divided by beta. For a bright fringe where the path difference is n lambda, the maximum possible order on the screen is d/lambda, since sin(theta) cannot exceed 1. These counting problems need only the formula y = n lambda D/d and integers; do all arithmetic in the same units of metre. A common trap is taking the least common multiple of wavelengths instead of the smallest orders that match.

Single-slit diffraction: pattern and width

Minima: a sin(theta) = n lambda. For small angles the n-th minimum is at y = n lambda D/a. The central maximum has width 2 lambda D/a, so if a halves the central maximum doubles. The secondary maxima are about half this width and much dimmer than the central one. In a Young experiment with slits of finite width a, the interference fringes are enclosed by the single-slit envelope: if d = 5 a, the fifth order is missing and the central envelope holds 2 x (5 - 1) + 1 = 9 bright fringes. The whole pattern scales with lambda/n if the experiment is immersed in a liquid. Increasing the slit width makes the diffraction less obvious: at a much greater than lambda the light goes in straight lines.

Memory hook

Suppose you drop two pebbles into a calm village pond at the same moment, a short distance apart, and watch the circular ripples spread and cross each other.

  1. Along some lines the crest of one ripple meets the crest of the other and the water rises high: constructive interference, a bright fringe in light.
  2. Along other lines a crest meets a trough and the water stays nearly flat: destructive interference, a dark fringe.
  3. Suppose you move the pebbles further apart: the bright and flat lines come closer together, just as fringe width beta = lambda D/d falls when the slit separation d grows.

Bright and dark fringes are lines where the path difference from the two sources is a whole or half number of wavelengths, so beta = lambda D/d.

Count path difference in wavelengths: whole number is bright, half number is dark.

Revision card

Try to answer each without looking above.

  1. State Huygens principle and what it gives for reflection and refraction.
  2. Write the Young fringe width and the positions of bright and dark fringes.
  3. State the conditions for coherent sources and sustained interference.
  4. Give the shift of the pattern when a thin sheet covers one slit.
  5. Write the single-slit minima condition and the width of the central maximum.
  6. What happens to the fringe width when the apparatus is immersed in a liquid of index n?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 1; fixed: 1
  • Report: content/reviews/learn4-opt-2026-11-20.md

Textbook references

  • NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 10: Wave Optics, 10.3.1 Refraction of a plane wave (read 2026-11-22)
  • NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 10: Wave Optics, 10.5 Interference of light waves and Young's experiment (read 2026-11-22)
  • NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 10: Wave Optics, 10.2 Huygens principle (read 2026-11-22)
  • NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 10: Wave Optics, Summary Summary (read 2026-11-22)
  • NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 10: Wave Optics, 10.6.2 Seeing the single slit diffraction pattern (read 2026-11-22)
  • NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 10: Wave Optics, 10.6.1 The single slit (read 2026-11-22)
  • NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 10: Wave Optics, 10.3.3 Reflection of a plane wave by a plane surface (read 2026-11-22)
  • NCERT Physics Part 2, Class 12 (reprint 2026-27), Chapter 10: Wave Optics, 10.4 Coherent and incoherent addition of waves (read 2026-11-22)

Sources used

  • NTA JEE (Main) 2026 syllabus, Physics, Unit 16 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
  • Standard results of school-level geometrical and wave optics; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.