EngineeringRise

Limits and Standard Limits: JEE Main Maths Notes

Reviewed Last updated 2026-11-20. Syllabus topic: Functions, limits and standard limits.

In short. A limit describes what f(x) approaches as x approaches a, not what f(a) is. It exists only when the left and right limits are equal and finite. Most JEE Main limits are 0/0 forms solved by factorising, rationalising or the standard limits.

  • The limit exists only if the left limit equals the right limit, and both are finite.
  • Standard limits (x in radians): sin x/x, tan x/x and (eˣ - 1)/x tend to 1; (1 - cos x)/x² tends to 1/2; ln(1 + x)/x tends to 1.
  • Scaling rule: sin(kx)/(mx) tends to k/m, so match the argument to the denominator before using the standard limit.
  • For 1 to the power infinity, the limit is e raised to the limit of (base - 1) x (exponent).
  • Indeterminate forms (0/0, infinity/infinity, 1ⁱnfinity and so on) are not numbers; rewrite until a standard limit appears.

Syllabus line: LIMIT, CONTINUITY AND DIFFERENTIABILITY: Real-valued functions, algebra of functions; polynomial, rational, trigonometric, logarithmic and exponential functions; inverse functions. Graphs of simple functions. Limits, continuity and differentiability. Differentiation of the sum, difference, product and quotient of two functions. Differentiation of trigonometric, inverse trigonometric, logarithmic, exponential, composite and implicit functions; derivatives of order upto two, Applications of derivatives: Rate of change of quantities, monotonic-Increasing and decreasing functions, Maxima and minima of functions of one variable. (NTA JEE (Main) 2026 syllabus, Mathematics, Unit 7 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Sets, relations and functions (lesson planned): Domain, range, composite and inverse functions are used from the first step. Read this first if one-one and onto are unclear.
  • Trigonometry (lesson planned): Limits use double-angle forms such as 1 - cos x = 2 sin²(x/2). Read this first if these identities are slow.

Related topics

The concept step by step

  1. Step 1: What a limit means

    The limit of f(x) as x tends to a is the number L that f(x) gets as close to as we like when x is close enough to a, with x different from a. It is about the neighbourhood, not the point. The value f(a) may be different from L or may not exist at all.

  2. Step 2: Left and right limits

    Approach a from below to get the left limit and from above to get the right limit. The limit exists only when both exist, are finite and are equal. For |x|/x at 0 the left limit is -1 and the right limit is 1, so there is no limit at 0.

  3. Step 3: Direct substitution and indeterminate forms

    If f is built from polynomials, trigonometric, exponential and logarithmic functions and f(a) is a finite number, the limit is f(a). When substitution gives 0/0, infinity/infinity, infinity - infinity, 0 x infinity or 1ⁱnfinity, the form is indeterminate and carries no value, so the expression must be rewritten.

  4. Step 4: Rewrite with algebra

    For 0/0 with polynomials, factorise and cancel the common factor (x - a). For square roots, multiply and divide by the conjugate. For x tending to infinity, divide numerator and denominator by the highest power of x. After the rewrite, substitute again.

  5. Step 5: Standard limits and scaling

    Memorise the standard limits: sin x/x, tan x/x, (eˣ - 1)/x and ln(1 + x)/x tend to 1 as x tends to 0, and (1 - cos x)/x² tends to 1/2. Match the argument: sin(5x)/(3x) = (5/3) x sin(5x)/(5x), which tends to 5/3. The same pattern works for every standard limit.

  6. Step 6: Expansions for hard items

    When numerator and denominator both vanish to a higher order, replace each function by its first terms: sin x = x - x³/6, cos x = 1 - x²/2, tan x = x + x³/3, eˣ = 1 + x + x²/2. Keep terms until the first non-cancelling power, then divide. This is the quickest route for items such as (tan x - sin x)/x³.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

Find the limit of (x² - 4)/(x - 2) as x tends to 2.

Marks-style solution of example 1
StepMarks
Direct substitution gives 0/0, so factorise: x² - 4 = (x - 2)(x + 2).1
For x not equal to 2 the quotient equals x + 2.1
As x tends to 2, x + 2 tends to 4. The limit is 4.1
Total: 3 marks3

Answer: 4

Fast method: Cancel (x - 2) and substitute: 2 + 2 = 4. For (xⁿ - aⁿ)/(x - a) the value is n a^(n-1) = 2 x 2 = 4.

Sanity check: The slope of the chord of y = x² near x = 2 is about 4 (the tangent slope at 2), so 4 is plausible.

Example 2 (easy)

How many integers lie in the domain of f(x) = sqrt(25 - x²) + log(x + 3)?

Marks-style solution of example 2
StepMarks
Square root needs 25 - x² at least 0, so -5 <= x <= 5.1
The logarithm needs x + 3 > 0, so x > -3.1
Domain is (-3, 5]. The integers are -2, -1, 0, 1, 2, 3, 4, 5: 8 integers.1
Total: 3 marks3

Answer: 8

Fast method: Intersect the two conditions: x in (-3, 5], then count the integers -2 to 5, which is 5 - (-2) + 1 = 8.

Sanity check: The interval has length 8 and includes its right end but not its left end, so it holds 8 integers.

Example 3 (medium)

Find the limit of (3ˣ - 2ˣ)/x as x tends to 0.

Marks-style solution of example 3
StepMarks
Split as (3ˣ - 1)/x - (2ˣ - 1)/x, since both pieces are standard.2
The standard limit (aˣ - 1)/x = ln a gives ln 3 - ln 2.1
The limit is ln(3/2) = 0.4055.1
Total: 4 marks4

Answer: ln(3/2), about 0.4055

Fast method: Use (aˣ - 1)/x tends to ln a for each term and subtract: ln 3 - ln 2.

Sanity check: Both 3ˣ and 2ˣ have slope ln 3 = 1.0986 and ln 2 = 0.6931 at 0; the difference 0.4055 is positive and less than ln 3.

Example 4 (medium)

Find the limit of (1 - cos 6x)/x² as x tends to 0.

Marks-style solution of example 4
StepMarks
Use 1 - cos t = 2 sin²(t/2): the numerator is 2 sin²(3x).1
Write the ratio as 2 x [sin(3x)/(3x)]² x 9.2
Since sin(3x)/(3x) tends to 1, the limit is 2 x 9 = 18.1
Total: 4 marks4

Answer: 18

Fast method: Standard limit (1 - cos kx)/x² = k²/2 with k = 6: 36/2 = 18.

Sanity check: For small x, 1 - cos 6x is about (6x)²/2 = 18 x², so dividing by x² gives 18.

Example 5 (medium)

A student writes: the limit of sin x / x as x tends to infinity is 1. Find the correct value.

Marks-style solution of example 5
StepMarks
The standard limit sin x/x = 1 holds only as x tends to 0.1
For large x, |sin x| is at most 1, so |sin x/x| is at most 1/x.1
By squeezing, 1/x tends to 0, so sin x/x tends to 0. The limit is 0.1
Total: 3 marks3

Answer: 0

Fast method: Bounded numerator over unbounded denominator tends to 0.

Sanity check: At x = 10⁷ the value cannot exceed 10⁻7 in size, which is practically 0.

Typical trap: Applying sin x / x = 1 without checking that x tends to 0. At infinity the numerator stays between -1 and 1 and the ratio is squeezed to 0.

Example 6 (hard)

Find the limit of (tan x - sin x)/x³ as x tends to 0.

Marks-style solution of example 6
StepMarks
Write tan x - sin x = sin x (1 - cos x)/cos x.1
Divide by x³: [sin x/x] x [(1 - cos x)/x²] x [1/cos x].2
The three factors tend to 1, 1/2 and 1 respectively.1
The limit is 1 x 1/2 x 1 = 1/2.1
Total: 5 marks5

Answer: 1/2

Fast method: Expansions: tan x - sin x = (x + x³/3) - (x - x³/6) = x³/2, so the ratio is 1/2.

Sanity check: At x = 0.01, tan x - sin x is about 5 x 10⁻7 and x³ = 10⁻6, giving 0.5.

Example 7 (hard, multi-step)

Find the limit of sqrt(x² + 5x) - x as x tends to infinity.

Marks-style solution of example 7
StepMarks
The form is infinity - infinity. Multiply and divide by sqrt(x² + 5x) + x.2
The numerator becomes (x² + 5x) - x² = 5x.1
The expression is 5x/(sqrt(x² + 5x) + x). Divide by x: 5/(sqrt(1 + 5/x) + 1).1
As x tends to infinity this tends to 5/(1 + 1) = 5/2 = 2.5.1
Total: 5 marks5

Answer: 5/2

Fast method: For large x, sqrt(x² + 5x) is about x + 5/2, so the difference is 5/2.

Sanity check: At x = 10⁶ the value is 2.4999994, matching 2.5. The result is positive because the root exceeds x.

Example 8 (hard)

Find the limit of (x cos x - sin x)/x³ as x tends to 0.

Marks-style solution of example 8
StepMarks
Expand: x cos x = x - x³/2 + (terms of order x⁵) and sin x = x - x³/6 + (terms of order x⁵).2
The numerator is (-1/2 + 1/6) x³ = -x³/3, up to order x⁵.1
Divide by x³: the limit is -1/3.1
Total: 4 marks4

Answer: -1/3

Fast method: The x terms cancel, so compare x³ coefficients: -1/2 - (-1/6) = -1/3.

Sanity check: At x = 0.1 the quotient is about -0.3330, close to -1/3. The sign is negative because sin x grows faster than x cos x.

Formulas and units

Formula and unit box for Functions, limits and standard limits
ResultFormulaValid whenUnits or noteWorked example
Sine and tangentsin x/x -> 1 and tan x/x -> 1 as x -> 0 (x in radians)x in radians, x tends to 0dimensionless; x in radiansExample 4
Cosine(1 - cos x)/x² -> 1/2 as x -> 0x in radians, x tends to 0dimensionlessExample 4
Exponential(eˣ - 1)/x -> 1 and (aˣ - 1)/x -> ln a as x -> 0x tends to 0; a > 0dimensionlessExample 3
Logarithmln(1 + x)/x -> 1 as x -> 0x tends to 0dimensionlessnone
The number e(1 + x)^(1/x) -> e as x -> 0; (1 + k/x)ˣ -> eᵏ as x -> infinityx tends to 0 (first form), x tends to infinity (second)dimensionlessnone
Power limit(xⁿ - aⁿ)/(x - a) -> n a^(n-1) as x -> a; ((1 + x)ⁿ - 1)/x -> nn a real number; a not 0 for the first formdimensionlessnone
1 to the power infinitylimit = e^L, with L = limit of (base - 1) x (exponent)base tends to 1 and exponent tends to infinitydimensionlessnone
Expansions near 0sin x = x - x³/6; cos x = 1 - x²/2; tan x = x + x³/3; eˣ = 1 + x + x²/2x near 0 and in radians; keep terms to the order neededx in radians for the trigonometric formsExample 8

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Using sin x / x = 1 when x tends to infinity, or when x is in degrees. Why it tempts: The standard limit is the most memorised result, and the condition x tends to 0 in radians is easy to drop under time pressure.
  • Inverting the ratio in the scaling rule: taking sin(2x)/sin(3x) as 3/2. Why it tempts: Both numbers 2 and 3 appear, and either order looks equally plausible; the correct ratio is coefficient in numerator over coefficient in denominator.
  • Stopping an expansion at the linear term when the numerator and denominator both start at x³. Why it tempts: The first terms cancel to give 0/0 again, and a rounded guess from the linear terms gives a plausible but wrong number.
  • Treating 1ⁱnfinity as 1. Why it tempts: Any power of 1 is 1, but the base here is only close to 1 and the large exponent restores a finite non-unit value such as e⁸.
  • Dropping the half in (1 - cos x)/x² = 1/2. Why it tempts: sin x/x = 1 is fresh in the mind, so the cosine limit is quoted as 1 and the option with 1 or 2 looks natural.
  • Cancelling a factor that is zero at the point without noting the domain, then reading f(a) from the simplified form. Why it tempts: The simplified expression is defined at a, which hides that the original function was not.

Time per question and fast method

Target: about 90 seconds per question.

Substitute first. If 0/0, look for a standard limit and match the argument to the denominator (sin kx over x gives k). For 1 to the power infinity use e raised to the limit of (base - 1) x exponent. If the leading terms cancel, expand sin, cos, tan and exponential to x³ and compare coefficients.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. The limit of sin 7x / sin 3x as x tends to 0 is
Show the answer

Answer: B: 7/3. Scale each sine: sin 7x is about 7x and sin 3x is about 3x, so the ratio tends to 7/3.

Question 2. The limit of (eˣ - 1 - x)/x² as x tends to 0 is
Show the answer

Answer: B: 1/2. eˣ - 1 - x = x²/2 + (terms of order x³), so the ratio tends to 1/2.

Question 3. The limit of (1 + 1/x)^(5x) as x tends to infinity is
Show the answer

Answer: C: e⁵, about 148.4. The form is (1 + 1/x)ˣ raised to the power 5, giving e⁵.

Question 4. The limit of |x|/x as x tends to 0 is
Show the answer

Answer: D: does not exist. The left limit is -1 and the right limit is 1, so the two sides disagree and the limit does not exist.

Question 5. The limit of (1 - cos x)/(x tan x) as x tends to 0 is
Show the answer

Answer: A: 1/2. (1 - cos x) is about x²/2 and x tan x is about x², so the ratio is 1/2.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Functions, domain and inverse

A real function needs a domain where every expression is defined: the radicand of a square root is at least 0, the argument of a logarithm is positive, denominators are non-zero, and the argument of sin^(-1) or cos^(-1) lies in [-1, 1]. The algebra of functions gives f + g, f - g, f g and f/g on the common domain (with g not zero for the quotient), and the composite f(g(x)) needs g(x) inside the domain of f. A function has an inverse only if it is one-one and onto its range; the graph of the inverse is the reflection of the graph in the line y = x.

Graphs of simple functions

Know the shapes that limit questions rely on: a straight line and a parabola y = x² (smooth, no breaks); y = 1/x (two branches, a break at 0 with values going to plus infinity on one side and minus infinity on the other); y = |x| (a corner at 0); y = sin x (bounded between -1 and 1, so sin x/x is squeezed at large x); y = eˣ (positive, rising, tends to 0 as x tends to minus infinity); y = ln x (defined for x > 0 only, tends to minus infinity as x tends to 0 from the right). Reading a graph for a limit means looking at the height as x closes in from each side. Example: for y = |x|/x the graph is the line y = -1 for x 0 with no point at x = 0, so the left limit is -1, the right limit is 1 and the limit at 0 does not exist. For y = (x² - 4)/(x - 2) the graph is the line y = x + 2 with one point missing at x = 2, and the height still closes in on 4.

Limit definition, one-sided limits and algebra of limits

The limit L of f at a exists if the left limit and right limit exist and are equal to L. Limits of a sum, difference, product and quotient (denominator limit not zero) equal the sum, difference, product and quotient of the limits. A limit as x tends to infinity describes behaviour for large x: a rational function tends to the ratio of leading coefficients when degrees are equal, to 0 when the denominator has the higher degree, and does not exist (infinite) when the numerator has the higher degree. Bounded functions such as sin x divided by x tend to 0 as x tends to infinity.

Standard limits, with the condition attached

As x tends to 0, with x in radians: sin x/x = 1, tan x/x = 1, (1 - cos x)/x² = 1/2, (eˣ - 1)/x = 1, (aˣ - 1)/x = ln a, ln(1 + x)/x = 1, (1 + x)^(1/x) = e. Also ((1 + x)ⁿ - 1)/x = n, (xⁿ - aⁿ)/(x - a) = n a^(n - 1) as x tends to a, and (1 + k/x)ˣ = eᵏ as x tends to infinity. The condition "x tends to 0" is essential: sin x/x tends to 0, not 1, as x tends to infinity. If x is in degrees, sin x/x tends to pi/180, a frequent trap.

Indeterminate forms and techniques

Forms 0/0 and infinity/infinity are cleared by factorising, rationalising, dividing by the top power or using standard limits. Infinity - infinity is converted to a quotient, as in sqrt(x² + 5x) - x = 5x/(sqrt(x² + 5x) + x), which tends to 5/2. For 1ⁱnfinity use e^(limit of (base - 1) x exponent). For 0⁰ and infinity⁰ take the logarithm first. The expansion method (sin, cos, tan, exponential to the needed order) is reliable whenever the leading terms cancel.

What examiners test and time per item

Single-correct items pair a standard limit with scaling (sin 3x/ sin 5x type), a 1ⁱnfinity form, a rationalisation, or a higher-order cancellation to x³. Integer items ask for a constant that makes a limit finite or for the value of a limit multiplied by a number. Typical errors are inverting the ratio, applying sin x/x at infinity, and stopping an expansion too early. Aim for 60 to 90 seconds on standard items and up to 150 seconds on higher-order ones. Check the answer by a rough order estimate: replace each function by its first expansion term and see that the result has the right sign and size.

Memory hook

Suppose a road in your town rises towards a flyover and a board shows the height of the road above the ground at each distance from a marker post. The board has no entry at the post itself because a barrier stands there, but you can read the heights on both sides of it.

  1. Read the heights 10 metres before the post and 10 metres after it. Both are close to 4 metres, say.
  2. Read them again 1 metre before and 1 metre after. The readings from the left and from the right both settle towards the same height, 4 metres, even though you never read the post itself.
  3. That common settled height is the limit at the post. It does not depend on the missing entry at the post; if the left readings settled to one height and the right readings to another, the limit would not exist.

A limit is the value that f(x) settles to as x closes in on the point from the left and from the right; f(a) itself plays no part.

Squeeze the gap from both sides and read where the values settle.

Revision card

Try to answer each without looking above.

  1. State the condition under which a limit exists in terms of left and right limits.
  2. Write the five standard limits at x tending to 0 for sin, tan, cosine, exponential and logarithm.
  3. What is the limit of sin(kx)/(mx) as x tends to 0?
  4. How do you evaluate a 1 to the power infinity limit?
  5. What do you do with infinity minus infinity involving a square root?
  6. Why is sin x / x not 1 as x tends to infinity?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 2; fixed: 2
  • Report: content/reviews/learn3-lcd-2026-11-20.md

Textbook references

  • NCERT Mathematics, Class 11 (reprint 2026-27), Chapter 12: Limits and Derivatives, 12.3 Limits (read 2026-11-22)
  • NCERT Mathematics Part 1, Class 12 (reprint 2026-27), Chapter 5: Continuity and Differentiability, 5.2 Continuity (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026, Mathematics Unit 7 (https://jeemain.nta.nic.in/document/syllabus-2026/), text read from syllabus/lines/jee-main/2026.json line jee-main-2026-U07
  • Every number in the worked examples and recall checks is recomputed by code (central differences, small-step limits, grid search); textbook section references are not attached yet, so this page stays Needs review

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.