Applications of Derivatives: JEE Main Maths Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Applications of derivatives: rate of change, monotonicity, maxima and minima.
In short. Related rates use the chain rule on a constraint; monotonicity comes from the sign of f prime; local extrema come from sign changes of f prime or the sign of f double prime; the greatest and least values on a closed interval come from comparing endpoints and stationary points.
- Related rates: write the relation between the quantities, differentiate with respect to time, then substitute the instant values.
- f prime > 0 on an interval means strictly increasing; f prime < 0 means strictly decreasing.
- A stationary point is a local maximum if f prime changes from + to -, a local minimum if from - to +; f double prime test: negative for maximum, positive for minimum.
- On [a, b] the greatest and least values are among f(a), f(b) and the values at stationary points.
- Optimisation: express the quantity in one variable using the constraint, find the stationary point, then confirm maximum or minimum.
Syllabus line: LIMIT, CONTINUITY AND DIFFERENTIABILITY: Real-valued functions, algebra of functions; polynomial, rational, trigonometric, logarithmic and exponential functions; inverse functions. Graphs of simple functions. Limits, continuity and differentiability. Differentiation of the sum, difference, product and quotient of two functions. Differentiation of trigonometric, inverse trigonometric, logarithmic, exponential, composite and implicit functions; derivatives of order upto two, Applications of derivatives: Rate of change of quantities, monotonic-Increasing and decreasing functions, Maxima and minima of functions of one variable. (NTA JEE (Main) 2026 syllabus, Mathematics, Unit 7 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Differentiation rules and derivatives of order two: Every step here uses f prime and f double prime. Read this first if the chain rule or implicit differentiation is slow.
- Continuity and differentiability: Extreme values can occur where the derivative does not exist, such as the corner of |x|. Read this first if one-sided derivatives are unclear.
Related topics
- Differentiation rules and derivatives of order two
- Continuity and differentiability
- Integral Calculus (lesson planned)
- Coordinate Geometry (lesson planned)
The concept step by step
Step 1: Derivative as a rate of change
If y depends on x, then dy/dx is the rate at which y changes per unit of x at that instant. When x itself depends on time, the chain rule gives dy/dt = dy/dx x dx/dt. A rate is positive when the quantity grows and negative when it falls, and its unit is the unit of y divided by the unit of time.
Step 2: Related rates routine
Write the geometric or physical relation between the quantities, such as x² + y² = L² for a ladder. Differentiate both sides with respect to time. Only now substitute the instant values, since substituting before differentiating freezes a quantity that is changing. Solve for the unknown rate and attach its unit and sign.
Step 3: Increasing and decreasing functions
A function is strictly increasing on an interval if f prime is positive there, and strictly decreasing if f prime is negative. Find the roots of f prime, mark them on a number line, and test the sign in each region. The intervals are open at the stationary points, though a function can still be monotonic across a point where f prime = 0.
Step 4: Local maxima and minima
A stationary point c has f prime(c) = 0. It is a local maximum if f prime changes from positive to negative, and a local minimum if it changes from negative to positive. If f double prime(c) is negative it is a maximum and if positive a minimum. When f double prime(c) = 0 the test fails and the sign of f prime decides, as for x³ at 0.
Step 5: Greatest and least values on a closed interval
On [a, b] a continuous function attains its greatest and least values at the endpoints or at stationary points inside. Compute f at a, at b and at every stationary point in the interval, then compare. The local maximum is not necessarily the greatest value, because an endpoint can be larger.
Step 6: Optimisation word problems
Name the quantity to optimise, use the constraint to write it in a single variable, state the domain, and differentiate. Solve f prime = 0, check the nature of the point by f double prime or by sign change, and compute the optimum value. Check against the endpoints of the domain, and give units.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
The radius of a sphere increases at 2 cm/s. Find the rate at which its volume increases when the radius is 5 cm.
| Step | Marks |
|---|---|
| V = 4 pi r³/3, so dV/dt = 4 pi r² dr/dt. | 1 |
| Substitute r = 5 cm and dr/dt = 2 cm/s: 4 pi x 25 x 2. | 1 |
| dV/dt = 200 pi = 628.3 cubic centimetres per second. | 1 |
| Total: 3 marks | 3 |
Answer: 200 pi cm³/s, about 628.3 cm³/s
Fast method: dV/dt = (surface area) x (dr/dt) = 4 pi x 25 x 2 = 200 pi.
Sanity check: Units: cm² x cm/s = cm³/s, as required for a volume rate. The surface area 314 cm² times 2 cm/s is about 628.
Example 2 (easy)
Find the minimum value of f(x) = x² - 4x + 3.
| Step | Marks |
|---|---|
| f prime(x) = 2x - 4 = 0 gives x = 2. | 1 |
| f double prime = 2 > 0, so x = 2 is a minimum. | 1 |
| f(2) = 4 - 8 + 3 = -1. | 1 |
| Total: 3 marks | 3 |
Answer: -1
Fast method: A parabola opening upwards has its minimum at x = -b/(2a) = 2, with value 3 - 4 = -1.
Sanity check: The roots are 1 and 3, so the minimum lies between them, below the x-axis, at the midpoint x = 2.
Example 3 (medium)
How many integers n in [-10, 10] have f(x) = x³ - 3x strictly increasing at x = n (f prime(n) > 0)?
| Step | Marks |
|---|---|
| f prime(x) = 3x² - 3 = 3(x - 1)(x + 1). | 1 |
| f prime > 0 when |x| > 1. | 1 |
| Integers with |n| at least 2: from -10 to -2 (9 values) and 2 to 10 (9 values). | 1 |
| Total 18. (At n = -1, 0, 1 the derivative is 0 or negative.) | 1 |
| Total: 4 marks | 4 |
Answer: 18
Fast method: Count the integers outside [-1, 1]: 21 integers in total minus the 3 integers -1, 0, 1 is 18.
Sanity check: The interval [-10, 10] has 21 integers, and removing the 3 near the origin where f prime is not positive leaves 18.
Example 4 (medium)
An open-top box with a square base of side a and volume 108 cubic metres is to be made. Find the least total surface area of the box.
| Step | Marks |
|---|---|
| Height h = 108/a². Surface area S = a² + 4 a h = a² + 432/a. | 2 |
| S prime = 2a - 432/a² = 0 gives a³ = 216, so a = 6 m. | 1 |
| S double prime = 2 + 864/a³ > 0 so this is a minimum. | 1 |
| S = 36 + 72 = 108 square metres. | 1 |
| Total: 5 marks | 5 |
Answer: 108 square metres
Fast method: Set 2a = 432/a² to get a³ = 216 and a = 6, then S = 36 + 72 = 108.
Sanity check: With a = 6 the height is 3 m, half the side, which is the known shape for an open box of minimum area. Units: m² for S.
Example 5 (medium)
Find the greatest value of f(x) = x³ - 3x on [-2, 3].
| Step | Marks |
|---|---|
| f prime = 3x² - 3 = 0 gives x = -1 and x = 1, both in [-2, 3]. | 1 |
| Values: f(-2) = -2, f(-1) = 2, f(1) = -2, f(3) = 18. | 2 |
| The greatest value is f(3) = 18. | 1 |
| Total: 4 marks | 4 |
Answer: 18
Fast method: Compare four numbers: -2, 2, -2, 18.
Sanity check: The cubic grows rapidly for large x, so the endpoint x = 3 with value 27 - 9 = 18 is clearly the largest.
Example 6 (hard, multi-step)
A hall owner has 200 m of fencing to enclose a rectangular parking area against a long straight wall, with fencing on three sides only. Find the greatest area, in square metres.
| Step | Marks |
|---|---|
| Let the sides perpendicular to the wall be x. The side along the wall is 200 - 2x. Area A = x(200 - 2x) = 200x - 2x². | 2 |
| A prime = 200 - 4x = 0 gives x = 50 m. | 1 |
| A double prime = -4 < 0, so it is a maximum. The parallel side is 100 m. | 1 |
| A = 50 x 100 = 5000 square metres. | 1 |
| Total: 5 marks | 5 |
Answer: 5000 m²
Fast method: The parabola 200x - 2x² has its top at x = 200/4 = 50; the value is 50 x 100.
Sanity check: Check an end of the range: x = 0 gives 0 and x = 100 gives 0, so the interior value 5000 is the maximum. Units: m x m = m².
Example 7 (hard)
How many local extrema does f(x) = x⁴ - 4x³ have?
| Step | Marks |
|---|---|
| f prime(x) = 4x³ - 12x² = 4x² (x - 3). | 1 |
| Stationary points: x = 0 and x = 3. | 1 |
| At x = 0 the factor x² is non-negative, so f prime does not change sign (it is negative on both sides): no extremum. | 2 |
| At x = 3, f prime changes from negative to positive: a local minimum with value -27. So there is 1 local extremum. | 1 |
| Total: 5 marks | 5 |
Answer: 1
Fast method: Count sign changes of f prime = 4x² (x - 3): only the factor (x - 3) changes sign, at x = 3.
Sanity check: A quartic with positive leading coefficient has a global minimum; the single local extremum is that minimum.
Example 8 (hard)
A point moves on the curve y = x² so that x increases at 3 units per second. Find the rate of increase of its distance from the origin at x = 1.
| Step | Marks |
|---|---|
| Distance D = sqrt(x² + y²) = sqrt(x² + x⁴). | 1 |
| dD/dx = (2x + 4x³)/(2 sqrt(x² + x⁴)) = (x + 2x³)/sqrt(x² + x⁴). | 2 |
| At x = 1: (1 + 2)/sqrt 2 = 3/sqrt 2 = 2.121. | 1 |
| dD/dt = (dD/dx)(dx/dt) = 2.121 x 3 = 6.364 units per second. | 1 |
| Total: 5 marks | 5 |
Answer: 9/sqrt 2, about 6.364 units/s
Fast method: dD/dt = (x dx/dt + y dy/dt)/D with dy/dt = 2x dx/dt = 6: (1 x 3 + 1 x 6)/sqrt 2 = 9/sqrt 2.
Sanity check: The point moves along the curve with speed sqrt(3² + 6²) = 6.708 units/s, and the distance from the origin cannot grow faster than that: 6.364 is less than 6.708.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Related rates | dy/dt = (dy/dx)(dx/dt); sphere: dV/dt = 4 pi r² dr/dt | quantities differentiable in time; sphere formula for radius r | units of y per second | Example 1 |
| Ladder constraint | x² + y² = L² => x dx/dt + y dy/dt = 0 | x and y are the legs of a ladder of fixed length L | metres per second | none |
| Monotonic | f prime > 0 increasing; f prime < 0 decreasing | f differentiable on the interval considered | not applicable | Example 3 |
| First derivative test | f prime changes + to - at c: local maximum; - to +: local minimum | f continuous at c, differentiable on both sides near c | not applicable | Example 7 |
| Second derivative test | f prime(c) = 0 and f double prime(c) 0: minimum | f double prime exists at c | not applicable | Example 2 |
| Closed interval | greatest and least values are among f(a), f(b) and f at stationary points | f continuous on [a, b] | units of f | Example 5 |
| Standard optima | x(L - 2x) is greatest at x = L/4; x + c/x has least value 2 sqrt c at x = sqrt c (x > 0) | x(L - 2x): 0 0, c > 0 | square units; units of x | Example 6 |
| Circle and sphere rates | dA/dt = 2 pi r dr/dt; dS/dt = 8 pi r dr/dt | circle area A and sphere surface S with radius r changing in time | area per second | none |
Common mistakes and speed
- Substituting the instant values into the relation before differentiating in time. Why it tempts: The numbers are given, so plugging them in at once seems to simplify the algebra, but it turns a changing quantity into a constant.
- Stating the local maximum as the greatest value on a closed interval without checking the endpoints. Why it tempts: The first derivative test finishes with a clearly labelled maximum, which feels like the answer.
- Treating f prime(c) = 0 as proof of an extremum. Why it tempts: Most textbook examples with f prime = 0 do show a turning point, so x³ and x⁴ - 4x³ at 0 are overlooked.
- Reporting the speed with the wrong sign, or giving a negative rate when the question asks for the speed. Why it tempts: The calculus gives a signed number and the word speed is not read carefully.
- Taking the ratio of the sides inverted in a ladder problem: y/x instead of x/y. Why it tempts: Either ratio is a plausible-looking slope, and the sign is the only difference.
- Forgetting the domain in an optimisation, for example allowing a negative side length. Why it tempts: The derivative equation often has other roots, and one of them may be outside the physical domain.
Time per question and fast method
Target: about 120 seconds per question.
For monotonic intervals factorise f prime and read the sign between roots. For closed intervals list the endpoint values and the stationary values, then pick. For related rates write the constraint, differentiate in time, and substitute only at the end.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
- A ladder 17 m long rests against a vertical wall. Its foot slides away from the wall at 0.30 m/s. When the… Verified (T1)
- The function f(x) = x³ - 6x² + 9x + 2 is strictly decreasing on an interval. The length of that interval is Verified (T1)
- Let M and m be the greatest and least values of f(x) = 2x³ - 15x² + 36x + 5 on the interval [0, 4]. The value… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Rate of change of quantities
If a quantity y is a function of x, the instantaneous rate of change is dy/dx. For quantities changing with time, dy/dt = (dy/dx)(dx/dt). Standard relations: sphere volume V = 4 pi r³/3 gives dV/dt = 4 pi r² dr/dt, and surface area S = 4 pi r² gives dS/dt = 8 pi r dr/dt; circle area A = pi r² gives dA/dt = 2 pi r dr/dt. For a ladder x² + y² = L² gives x dx/dt + y dy/dt = 0. Rates of decrease are negative, and in answers the speed (magnitude) is often requested. Differentiate first and substitute afterwards.
Monotonic functions
If f prime(x) > 0 on an interval then f is strictly increasing on it; if f prime(x) < 0 then strictly decreasing; if f prime is at least 0 and zero only at isolated points, f is still strictly increasing. For a cubic f(x) = x³ - 6x² + 9x + 2, f prime = 3(x - 1)(x - 3) is negative on (1, 3), so f decreases there and increases on (-infinity, 1) and (3, infinity). A function can be monotonic with f prime = 0 at a point, as x³ is at 0. For a polynomial, the number of turning points is at most one less than its degree.
Local and absolute extrema
First derivative test: at a stationary point c, f prime changing sign from + to - gives a local maximum; - to + gives a local minimum; no change gives neither. Second derivative test: f double prime(c) 0 a minimum, = 0 is inconclusive. For f(x) = x⁴ - 4x³, f prime = 4x² (x - 3) has no sign change at 0, so only x = 3 is an extremum (a minimum with value -27) even though f double prime(0) = 0 as well. Also check points where f prime does not exist, such as the vertex of |x|. For f(x) = 2x³ - 15x² + 36x + 5 on [0, 4] the values 5, 33, 32, 37 show that the greatest is at the endpoint.
Optimisation problems
The standard patterns: a rectangle against a wall with fixed fencing (maximise x(L - 2x), at x = L/4); an open box with a square base and fixed volume (minimise a² + 4V/a, at a³ = 2V); and the AM-GM check on sums such as x + c/x with minimum 2 sqrt c at x = sqrt c. Always state the domain, since the optimum may sit at its boundary, and check the nature of the stationary point. Present the answer with units, such as square metres or cubic centimetres per second.
What examiners test and time per item
Single-correct items include a related-rates ladder or balloon problem, the length or number of integers in a decreasing interval, and the maximum or minimum of a cubic or rational function. Integer items ask for M - m on a closed interval, a minimum area, or a rate multiplied to give a whole number. Allow 100 seconds for a related rate, 60 seconds for a sign of f prime item and 150 seconds for closed-interval or optimisation items. The common trap is comparing only stationary points and skipping the endpoints.
Memory hook
Suppose you have 120 metres of rope and want to fence a rectangular vegetable plot behind your house, using the back wall as one side so that rope is needed for only three sides.
- If the two sides perpendicular to the wall each measure x metres, the side parallel to the wall uses the rest of the rope: 120 - 2x metres.
- The area is x (120 - 2x). When x is tiny the plot is a thin strip, and when x is near 60 the parallel side shrinks to nothing; the area is small at both ends.
- The area rises and then falls, so there is a top. At the top the slope of the area graph is 0, which gives x = 30 metres and an area of 1800 square metres.
At a maximum or minimum the graph turns, so the slope is zero; compare these turning points with the ends of the allowed range.
Slope zero is the top of the hill; always compare it with the ends of the road.
Revision card
Try to answer each without looking above.
- What is the chain-rule form of a related-rates equation?
- State the sign tests for increasing and decreasing functions.
- State the first and second derivative tests for a local extremum.
- How do you find the greatest and least values of a function on [a, b]?
- Why is f prime(c) = 0 not enough to conclude a maximum or minimum?
- What are the steps of an optimisation problem with a constraint?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 1; fixed: 1
- Report: content/reviews/learn3-lcd-2026-11-20.md
Textbook references
- NCERT Mathematics Part 1, Class 12 (reprint 2026-27), Chapter 6: Application of Derivatives, 6.3 Increasing and Decreasing Functions (read 2026-11-22)
- NCERT Mathematics Part 1, Class 12 (reprint 2026-27), Chapter 6: Application of Derivatives, 6.4 Maxima and Minima (read 2026-11-22)
- NCERT Mathematics Part 1, Class 12 (reprint 2026-27), Chapter 6: Application of Derivatives, 6.2 Rate of Change of Quantities (read 2026-11-22)
- NCERT Mathematics Part 1, Class 12 (reprint 2026-27), Chapter 6: Application of Derivatives, 6.4.1 Maximum and Minimum Values of a Function in a Closed Interval (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026, Mathematics Unit 7 (https://jeemain.nta.nic.in/document/syllabus-2026/), text read from syllabus/lines/jee-main/2026.json line jee-main-2026-U07
- Every number in the worked examples and recall checks is recomputed by code (central differences, small-step limits, grid search); textbook section references are not attached yet, so this page stays Needs review
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.