EngineeringRise

Area Under Curves: JEE Main Maths Notes and Solutions

Reviewed Last updated 2026-11-20. Syllabus topic: Area under curves.

In short. Area is an integral of a non-negative height: upper curve minus lower curve across the strip. Sketch first, find intersection points, split wherever the curves cross, and choose dx or dy strips so one formula covers the region.

  • Area under y = f(x) from a to b is the integral of |f(x)| dx; the signed integral can cancel, the area cannot.
  • Area between two curves is the integral of (top curve - bottom curve) dx between intersection points.
  • If the region is bounded by x = g(y), integrate (right - left) dy; this often avoids splitting.
  • Use symmetry to compute one part and multiply; know the circle pi r² and ellipse pi a b.
  • Standard: y² = 4ax and x² = 4by enclose an area of 16 a b / 3 square units.

Syllabus line: INTEGRAL CALCULAS: Integral as an anti-derivative, Fundamental integrals involving algebraic, trigonometric, exponential and logarithmic functions. Integration by substitution, by parts and by partial fractions. Integration using trigonometric identities. Evaluation of simple integrals of the type The fundamental theorem of calculus, properties of definite integrals. Evaluation of definite integrals, determining areas of the regions bounded by simple curves by simple curves in standard forms. (NTA JEE (Main) 2026 syllabus, Mathematics, Unit 8 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Definite integrals and properties: Area is a definite integral, and splitting at roots and symmetry rules are used throughout. Read this first if the modulus integral and odd or even rules are not clear.
  • Indefinite integrals and methods: You need the antiderivative of polynomials, roots, trigonometric and sqrt(a² - x²) forms. Read this first if standard forms are slow.
  • Coordinate geometry (lesson planned): You must sketch lines, parabolas, circles and ellipses and find where they meet. Read this first if you cannot recognise a conic from its equation.

Related topics

The concept step by step

  1. Step 1: Area as a sum of thin strips

    Cut the region under y = f(x) from x = a to x = b into thin vertical strips of width dx. Each strip has height f(x), so its area is f(x) dx. Adding all strips gives the integral of f(x) dx from a to b. This holds when f(x) is at least 0 on the interval, so the curve lies on or above the x-axis.

  2. Step 2: Below the axis, area uses the modulus

    Where f(x) is negative the integral is negative, but an area cannot be negative. So the area is the integral of |f(x)| dx. Find the points where f(x) = 0 inside the interval, split the interval there, and take each piece with its correct sign. For y = x² - 4x + 3 from 0 to 4 the signed integral is 4/3 but the area is 4.

  3. Step 3: Area between two curves

    For two curves with y = f(x) above y = g(x), a strip at x has height f(x) - g(x), so the area is the integral of [f(x) - g(x)] dx. First sketch both curves, then solve f(x) = g(x) to get the limits. If the curves swap which one is above, split at the crossing point, because the modulus applies to the difference.

  4. Step 4: Horizontal strips when the region is easier along y

    Sometimes the region is bounded by x = g(y) on both sides, such as a parabola x = y² and a line. Take thin horizontal strips of width dy. The strip length is x_right - x_left, so the area is the integral of (x_right - x_left) dy between the lowest and highest y. This usually needs only one integral where vertical strips would need two.

  5. Step 5: Use symmetry and standard areas

    If the region is symmetric about an axis, compute the part in one quadrant and multiply. The circle x² + y² = r² has area pi r² and the ellipse x²/a² + y²/b² = 1 has area pi a b. The parabolas y² = 4ax and x² = 4by enclose 16 a b / 3. These standard results can be derived with the integral and are good for a quick check.

  6. Step 6: A routine and a sanity check

    Routine: sketch, find intersections, choose dx or dy, mark top and bottom (or right and left), write the integral, evaluate, state square units. Sanity check: the area must be positive and smaller than a bounding rectangle drawn around the region. Also compare with a simple shape, such as a triangle or a rectangle, whose area you can find at once.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

Find the area under y = x² from x = 0 to x = 3.

Marks-style solution of example 1
StepMarks
The curve is above the axis, so area = integral of x² dx from 0 to 3.1
Antiderivative is x³/3.1
Evaluate: 27/3 - 0 = 9 square units.1
Total: 3 marks3

Answer: 9 square units

Fast method: Under y = xⁿ from 0 to a the area is a^(n+1)/(n+1) = 27/3.

Sanity check: The bounding rectangle has area 3 x 9 = 27 square units, and a parabola takes one third of it, giving 9 square units.

Example 2 (easy)

Find the area enclosed between y = x and y = x².

Marks-style solution of example 2
StepMarks
Solve x = x²: x = 0 and x = 1. Between them y = x is above y = x².1
Area = integral of (x - x²) dx from 0 to 1.1
= [x²/2 - x³/3] from 0 to 1 = 1/2 - 1/3 = 1/6 = 0.1667 square units.1
Total: 3 marks3

Answer: 1/6 square units

Fast method: The line is above the parabola between x = 0 and x = 1, so integrate (x - x²) from 0 to 1.

Sanity check: The triangle under y = x has area 0.5 and the area under y = x² is 1/3. The difference 0.5 - 0.3333 = 0.1667 square units.

Example 3 (medium)

Find the area enclosed by the ellipse x²/9 + y²/4 = 1.

Marks-style solution of example 3
StepMarks
By symmetry area = 4 times the area in the first quadrant, where y = 2 sqrt(1 - x²/9), x from 0 to 3.2
Put x = 3 sin t: dx = 3 cos t dt and the integral becomes 4 times integral of 2 cos t times 3 cos t dt from 0 to pi/2 = 24 times integral of cos² t dt.2
Integral of cos² t from 0 to pi/2 is pi/4. Area = 24 x pi/4 = 6 pi = 18.85 square units.1
Total: 5 marks5

Answer: 6 pi square units (18.85)

Fast method: Ellipse area = pi a b = pi x 3 x 2 = 6 pi.

Sanity check: The ellipse sits in a 6 by 4 rectangle of area 24 square units, and the ellipse takes pi/4 of it: 24 x 0.7854 = 18.85.

Example 4 (medium)

Find the area bounded by y = x² - 4x + 3, the x-axis and the lines x = 0 and x = 4.

Marks-style solution of example 4
StepMarks
Roots of x² - 4x + 3 = 0 are x = 1 and x = 3. The curve is positive on [0, 1], negative on [1, 3], positive on [3, 4].2
Integrals over the three pieces are 4/3, -4/3 and 4/3.2
Area is the sum of the absolute values: 4/3 + 4/3 + 4/3 = 4 square units.1
Total: 5 marks5

Answer: 4 square units

Fast method: Find the roots x = 1 and x = 3, split the interval there, and integrate each piece with its sign made positive: 4/3 + 4/3 + 4/3.

Sanity check: The curve peaks at 3 on the left and dips to -1 at x = 2, so |f| averages about 1 over a base of 4, so about 4 square units.

Typical trap: Evaluating the signed integral from 0 to 4 gives 4/3 and looks like a neat answer, but the negative piece should be counted as positive area. The area is 4, three times the signed value.

Example 5 (medium)

Find the area enclosed between the parabola x = y² and the line y = x - 2.

Marks-style solution of example 5
StepMarks
Solve y² = y + 2 (since x = y + 2): y = -1 and y = 2, so the points are (1, -1) and (4, 2).2
Use horizontal strips: right boundary is the line x = y + 2, left boundary is the parabola x = y².1
Area = integral of (y + 2 - y²) dy from -1 to 2 = [y²/2 + 2y - y³/3] = (2 + 4 - 8/3) - (1/2 - 2 + 1/3) = 10/3 + 7/6 = 9/2 = 4.5 square units.2
Total: 5 marks5

Answer: 9/2 square units

Fast method: Integrating along y needs one integral: right curve x = y + 2, left curve x = y², with y from -1 to 2, so the area is the integral of (y + 2 - y²) dy.

Sanity check: The region sits inside a box 4 wide in x (x = 0 to 4) and 3 high in y (y = -1 to 2), area 12 square units; the region fills 4.5 of it, which is plausible for a curved region that does not reach the corners.

Example 6 (hard, multi-step)

Find the area enclosed between the parabolas y² = 4x and x² = 4y.

Marks-style solution of example 6
StepMarks
Solve the pair: y = x²/4 into y² = 4x gives x⁴/16 = 4x, so x = 0 or x = 4. Points (0, 0) and (4, 4).2
Between x = 0 and x = 4 the upper curve is y = 2 sqrt x and the lower is y = x²/4 (test x = 1: 2 against 0.25).1
Area = integral of (2 sqrt x - x²/4) dx from 0 to 4 = [(4/3) x^(3/2) - x³/12] from 0 to 4.2
Evaluate: (4/3)(8) - 64/12 = 32/3 - 16/3 = 16/3 = 5.333 square units.2
Total: 7 marks7

Answer: 16/3 square units

Fast method: Standard result for y² = 4ax and x² = 4by: 16 a b / 3 with a = b = 1.

Sanity check: The region lies in a 4 by 4 square of area 16, and a lens between two parabolas takes about a third of it; 16/3 = 5.33.

Example 7 (hard)

Find the area enclosed by y = sin x, y = cos x, the lines x = 0 and x = pi.

Marks-style solution of example 7
StepMarks
Solve sin x = cos x: tan x = 1, so x = pi/4 inside [0, pi]. Cos is above sin on [0, pi/4]; sin is above cos on [pi/4, pi].2
Area = integral from 0 to pi/4 of (cos x - sin x) dx + integral from pi/4 to pi of (sin x - cos x) dx.1
First piece: [sin x + cos x] from 0 to pi/4 = sqrt 2 - 1. Second piece: [-cos x - sin x] from pi/4 to pi = 1 + sqrt 2.2
Total = (sqrt 2 - 1) + (sqrt 2 + 1) = 2 sqrt 2 = 2.828 square units.1
Total: 6 marks6

Answer: 2 sqrt 2 square units (2.828)

Fast method: Write sin x - cos x = sqrt 2 sin(x - pi/4); the sign changes only at x = pi/4, so split there and integrate the sine hump.

Sanity check: The gap |sin x - cos x| is at most sqrt 2 = 1.414 and averages about 0.9 over a base of 3.14, giving about 2.8, in line with 2.828.

Formulas and units

Formula and unit box for Area under curves
ResultFormulaValid whenUnits or noteWorked example
Area under a curveA = integral from a to b of |f(x)| dxf continuous on [a, b]; |f| splits the area where f changes signsquare units (units of x times units of y)Example 1
Area between curves (dx)A = integral from a to b of [f(x) - g(x)] dx, f above gf and g continuous, f(x) >= g(x) on [a, b]square unitsExample 2
Area between curves (dy)A = integral from c to d of [x_right - x_left] dyx_right(y) >= x_left(y) on [c, d], both continuoussquare unitsExample 5
Circlex² + y² = r² has area pi r²circle centred at origin, radius rsquare units (length squared)none
Ellipsex²/a² + y²/b² = 1 has area pi a bellipse centred at origin with semi-axes a and bsquare units (length squared)none
Two parabolasy² = 4ax and x² = 4by enclose 16 a b / 3a > 0 and b > 0; region between the two curvessquare units (length squared)none
Symmetryregion symmetric about an axis: A = 2 x (half) ; about both axes: 4 x (quadrant)region symmetric about the axis (or both axes) used for the multiplierdimensionless multiplierExample 3

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Using the signed integral when the curve crosses the axis. Why it tempts: The integral is one clean calculation and the cancelled value is often a tidy number that appears as an option.
  • Skipping the sketch and taking the wrong curve as top. Why it tempts: Subtracting in the wrong order only changes the sign, and the modulus then hides the error until the region needs a split.
  • Using vertical strips when the curves cross, without splitting at the crossing point. Why it tempts: A single formula for the difference feels complete; the second region is easy to overlook.
  • Taking x limits for a region described along y or the reverse. Why it tempts: The intersection points have two coordinates, and picking the wrong one gives a plausible integral.
  • Forgetting to multiply by 2 or 4 after using symmetry, or doubling when the region is not symmetric. Why it tempts: Symmetry is introduced to save time and the multiplier is the last step, easy to skip under time pressure.
  • Leaving the answer without square units, or mixing exact and decimal forms. Why it tempts: The numeric part feels like the whole answer and options give only numbers.

Time per question and fast method

Target: about 120 seconds per question.

Know the circle and ellipse areas (pi r², pi a b) and use the check value 16 a b / 3 for y² = 4ax and x² = 4by. Otherwise sketch quickly, mark intersections, choose the strip direction that needs one integral, and check the answer against a bounding rectangle.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. The area under y = x³ from x = 0 to x = 2 is
Show the answer

Answer: B: 4 square units. The integral of x³ from 0 to 2 is 2⁴/4 = 4 square units.

Question 2. The area enclosed by x²/16 + y²/9 = 1 is
Show the answer

Answer: A: 12 pi square units. Ellipse area is pi a b with a = 4 and b = 3, so 12 pi = 37.70 square units.

Question 3. The area enclosed between y = x and y = x³ is
Show the answer

Answer: B: 1/2 square units. They meet at x = -1, 0, 1. By symmetry the area is 2 x integral from 0 to 1 of (x - x³) = 2 x (1/2 - 1/4) = 1/2 square units.

Question 4. The area (not the signed integral) between y = sin x and the x-axis from x = 0 to x = 2 pi is
Show the answer

Answer: C: 4 square units. The signed integral is 0, but each hump has area 2, so the area is 4 square units.

Question 5. The area enclosed between x = y² and the line x = 4 is
Show the answer

Answer: B: 32/3 square units. Use horizontal strips: integral of (4 - y²) dy from -2 to 2 = 2 x (8 - 8/3) = 32/3 square units.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Area under a curve: definition, sign and units

For f continuous on [a, b], the area between the curve y = f(x), the x-axis and the lines x = a and x = b is the integral of |f(x)| dx. If f changes sign at c1, c2, ... inside the interval, split at each root and take the absolute value of each piece. The area between the curve x = g(y), the y-axis and the lines y = c and y = d is the integral of |g(y)| dy. Units: if x is in metres and y in newtons the area is in newton-metres; in plain coordinate geometry the unit is square units. A common requirement is the area between a curve and an axis for a function such as sin x on [0, 2 pi]: the signed integral is 0 but the area is 4. Check for sign changes by finding the roots in the interval before integrating.

Area between two curves and choice of strips

For curves y = f(x) and y = g(x) with f above g on [a, b], area = integral of [f(x) - g(x)] dx. Find a and b by solving f(x) = g(x). If the curves cross inside, split at the crossing. When the region is better described by x = g(y) and x = h(y) with h to the right, area = integral of [h(y) - g(y)] dy. Choose vertical strips when the top and bottom curve are each single formulas over the whole x-range; choose horizontal strips when the left and right boundaries are single formulas in y. For a parabola y² = 4ax with a line or another curve, dy strips are usually simpler because x is a polynomial in y. The sign of the difference decides which curve is on top; test one point between the limits rather than assuming.

Standard areas and symmetry

Circle x² + y² = r² has area pi r². Ellipse x²/a² + y²/b² = 1 has area pi a b, found as 4 times the integral of b sqrt(1 - x²/a²) from 0 to a. Parabolas y² = 4ax and x² = 4by enclose 16 a b / 3 (a standard result, best used as a check; they meet at (0, 0) and (4 a^(1/3) b^(2/3), 4 a^(2/3) b^(1/3)), which fix the limits). A parabola with a line or chord is done by ordinary integration of the difference, along y when the parabola is y² = 4ax. When a region is symmetric about the x-axis, y-axis or origin, find the area in one half or quadrant and multiply by 2 or 4. If the region is split by a circle and a line through the centre, use the geometric area of the sector or segment when possible, since it avoids a trigonometric integral.

Modulus, piecewise and trigonometric regions

For regions with |x| or |y| use symmetry: the area bounded by y = |x| and y = x² is twice the area in the first quadrant. For piecewise functions integrate each piece over its sub-interval. For trigonometric regions, such as the area between y = sin x and y = cos x, find the points where they are equal (tan x = 1), then split the interval at those points: for x from 0 to pi the area is 2 sqrt 2. For a region enclosed by a curve and its tangent or normal, first find the point of contact and the equation of the line. When two curves touch rather than cross, the difference does not change sign. For inequalities such as x² + y² = 2x, draw the region first and identify the boundary curves; the answer often combines a circle sector and a parabola area.

What examiners test, edge cases and checking

Likely forms to practise (no previous-year data is imported yet) are areas between a parabola and a line, between two parabolas, a circle and a parabola, a curve with modulus and the area under a trigonometric curve. Integer-type items ask for a multiple of the area, so keep the exact value. Edge cases: a limit at a point where the curve touches the axis; a region bounded by three or more curves that needs splitting; the shape defined by an inequality. Never skip the sketch. Checks: the area is positive; it is smaller than a bounding rectangle; it matches a standard shape if the region looks like one; and a quick numerical estimate by counting a few strips should be within a few percent. Time guide: 100 seconds for a single parabola and line; 150 to 180 seconds for a region needing a split.

Memory hook

Suppose a farmer has a field beside a road and a canal, and the boundary along the road is a straight line while the canal bank curves. You want the amount of land between them so that you can order seed.

  1. Walk along the road in steps of one metre. At each step measure the width of the field from the road to the canal bank; width times one metre is the land in that strip.
  2. Add all strips. Where the canal crosses to the other side of the road the signed width flips sign; land on that side still counts as land, so you add the absolute amounts piece by piece, not the signed widths.
  3. If the canal is easier to describe across the field than along it, measure strips across instead. That is the same as choosing dy strips.

Area is the sum of thin strips of width times length; use the modulus or split where the boundary crosses, and choose strips along the direction in which the boundaries are simpler.

Sketch, find the meeting points, cut into strips, top minus bottom.

Revision card

Try to answer each without looking above.

  1. Why is area under a curve the integral of |f(x)| and not of f(x)?
  2. Write the area between y = f(x) and y = g(x) and say how to find the limits.
  3. When do you choose dy strips instead of dx strips?
  4. Give the areas of the circle, the ellipse and the region between y² = 4ax and x² = 4by.
  5. How do you handle two curves that cross inside the interval?
  6. What three checks confirm an area answer quickly?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 2; fixed: 2
  • Report: content/reviews/learn2-int-2026-11-20.md

Textbook references

  • NCERT Mathematics Part 2, Class 12 (reprint 2026-27), Chapter 8: Application of Integrals, 8.2 Area under Simple Curves (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026, Mathematics Unit 8, text read from syllabus/lines/jee-main/2026.json ('determining areas of the regions bounded by simple curves in standard forms'). The formulas lost in the source text are listed in the indefinite-integral lesson and are UNVERIFIED against the official PDF
  • NCERT Class 12 Mathematics, Application of Integrals (read as a reference for scope, content written fresh)

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.