EngineeringRise

Circle: Equations, Chords and Tangents for JEE Main

Reviewed Last updated 2026-11-20. Syllabus topic: Circle.

In short. Every circle problem reduces to centre and radius: read them from the equation by completing squares, or build the equation from them. A line meets a circle by comparing the perpendicular distance d of the centre with r: chord length 2 sqrt(r² - d²) if d r.

  • Standard form: (x - h)² + (y - k)² = r². General form: x² + y² + 2gx + 2fy + c = 0, centre (-g, -f), radius sqrt(g² + f² - c), real only if g² + f² - c > 0.
  • Diameter form: (x - x1)(x - x2) + (y - y1)(y - y2) = 0 for the circle with the points (x1, y1) and (x2, y2) as the ends of a diameter.
  • Line y = m x + c and circle x² + y² = r²: touch when c² = r² (1 + m²); chord length 2 sqrt(r² - d²) with d the distance from the centre to the line.
  • Length of the tangent from an external point P is sqrt(S1), where S1 is the circle's left side evaluated at P (x² + y² + 2gx + 2fy + c at P).
  • Subtracting the equations of two intersecting circles gives the line through their common points (the common chord).

Syllabus line: CO-ORDINATE GEOMETRY : Cartesian system of rectangular coordinates in a plane, distance formula, sections formula, locus and its equation, the slope of a line, parallel and perpendicular lines, intercepts of a line on the co-ordinate axis. Straight line: Various forms of equations of a line, intersection of lines, angles between two lines, conditions for concurrence of three lines, the distance of a point form a line, co-ordinate of the centroid, orthocentre and circumcentre of a triangle. Circle, conic sections: A standard form of equations of a circle, the general form of the equation of a circle, its radius and centre, equation of a circle when the endpoints of a diameter are given, points of intersection of a line and a circle with the centre at the origin and sections of conics, equations of conic sections (parabola, ellipse and hyperbola) in standard forms. (NTA JEE (Main) 2026 syllabus, Mathematics, Unit 10 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Coordinates, distance, section formula and locus: A circle is the locus of points at a fixed distance from the centre, so the distance formula is the start. Read this first if the distance formula or a locus is unclear.
  • Straight line: forms, angles, distance and triangle centres: Chords, tangents and the common chord all use the distance of a point from a line and perpendicular slopes. Read this first if either is unfamiliar.
  • Complex numbers and quadratic equations (lesson planned): A line meets a circle where a quadratic has real roots; the discriminant decides tangent, secant or miss. Read this first if the discriminant is not automatic.

Related topics

The concept step by step

  1. The circle as a locus: standard equation

    A circle is the set of points at a fixed distance r (the radius) from a fixed point (h, k) (the centre). Applying the distance formula to a general point (x, y) gives (x - h)² + (y - k)² = r². With the centre at the origin this reduces to x² + y² = r². Radius and centre are the two parameters to find, and every circle question asks for one of them or uses them. The right side is the radius squared, never the radius.

  2. General form: centre and radius by comparison

    Expanding the standard form gives x² + y² + 2gx + 2fy + c = 0 with g = -h, f = -k and c = h² + k² - r². So the centre is (-g, -f) and the radius is sqrt(g² + f² - c). The equation represents a real circle only if g² + f² - c is positive; zero gives a point circle and a negative value gives no real points. Features to recognise: the coefficients of x² and y² are equal and there is no xy term. To read the centre, halve the coefficients of x and y and change their signs.

  3. Circle with a given diameter

    If A(x1, y1) and B(x2, y2) are the ends of a diameter, any point P on the circle subtends a right angle at P, so the vectors PA and PB are perpendicular. In coordinates this is (x - x1)(x - x2) + (y - y1)(y - y2) = 0. The centre is the midpoint of AB and the radius is half of AB. This form saves completing squares: it can be expanded directly, and substituting a point gives the value S1 used for tangent lengths.

  4. Line and circle: secant, tangent, miss

    Let d be the perpendicular distance of the centre from a line. If d r there is no common point. For the line y = m x + c and the circle x² + y² = r², tangency is c² = r² (1 + m²). Substituting the line into the circle gives a quadratic whose discriminant tells the same story.

  5. Tangent length and the common chord

    A tangent at a point is perpendicular to the radius to that point. From an external point P at distance D from the centre, the tangent length is sqrt(D² - r²), which equals sqrt(S1) where S1 is the circle's equation with the point substituted. For two intersecting circles S1 = 0 and S2 = 0, the equation S1 - S2 = 0 is linear and represents the line through both common points. The chord on this line has length 2 sqrt(r² - d²) with d the distance of either centre from it, and the common chord is perpendicular to the line of centres.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

Find the radius of the circle x² + y² - 4x + 6y - 12 = 0.

Marks-style solution of example 1
StepMarks
Compare with x² + y² + 2gx + 2fy + c = 0: g = -2, f = 3, c = -12. The centre is (2, -3).1
Radius = sqrt(g² + f² - c) = sqrt(4 + 9 + 12).1
Radius = sqrt(25) = 5 units.1
Total: 3 marks3

Answer: 5 units

Fast method: Complete the squares: (x - 2)² + (y + 3)² = 12 + 4 + 9 = 25, so r = 5.

Sanity check: Units: length. The centre (2, -3) is at distance sqrt(4 + 9) = 3.6 from the origin and the origin gives left side -12, so it lies inside the circle of radius 5 (3.6 < 5), consistent with a negative value.

Example 2 (easy)

A circle has centre (2, -1) and passes through (5, 3). Write it as x² + y² + Dx + Ey + c = 0 and find c.

Marks-style solution of example 2
StepMarks
Radius squared = (5 - 2)² + (3 + 1)² = 9 + 16 = 25.1
Standard form: (x - 2)² + (y + 1)² = 25, which expands to x² + y² - 4x + 2y + 5 - 25 = 0.1
So c = h² + k² - r² = 4 + 1 - 25 = -20.1
Total: 3 marks3

Answer: c = -20

Fast method: c = h² + k² - r² = 5 - 25 = -20.

Sanity check: Substitute (5, 3): 25 + 9 - 20 + 6 - 20 = 0, so the given point lies on the circle x² + y² - 4x + 2y - 20 = 0.

Example 3 (medium)

Find the length of the chord cut from the circle x² + y² = 25 by the line 3x + 4y = 15.

Marks-style solution of example 3
StepMarks
Centre (0, 0), radius 5. Write the line as 3x + 4y - 15 = 0.1
Distance of the centre from the line: d = 15/sqrt(9 + 16) = 3.1
Half-chord = sqrt(25 - 9) = 4, so the chord = 8 units.1
Total: 3 marks3

Answer: 8 units

Fast method: d = 3, r = 5 is a 3-4-5 triangle, so the half-chord is 4 and the chord is 8.

Sanity check: Units: length. The chord 8 is less than the diameter 10 and more than zero, as it must be for a line at distance 3 < 5 from the centre. Direct check: the line meets the circle at (5, 0) and (-1.4, 4.8), and the distance between them is sqrt(6.4² + 4.8²) = 8.

Example 4 (medium)

The line y = 2x + c touches the circle x² + y² = 5. Find the positive value of c.

Marks-style solution of example 4
StepMarks
The circle has r² = 5. Tangency needs distance of the centre from 2x - y + c = 0 equal to r: |c|/sqrt(5) = sqrt(5).2
So |c| = 5, giving c = 5 or c = -5.1
The positive value is c = 5.1
Total: 4 marks4

Answer: c = 5

Fast method: c² = r² (1 + m²) = 5 x 5 = 25, so c = 5 (or -5).

Sanity check: Check with the discriminant: substituting y = 2x + 5 gives 5x² + 20x + 20 = 0, that is x² + 4x + 4 = 0 with discriminant 0, so there is exactly one point of contact, (-2, 1).

Typical trap: Using c = r sqrt(1 + m²) with r = 5 when the circle is x² + y² = 5. Here r² = 5, so c² = 5(1 + 4) = 25 and c = 5. Taking r = 5 gives 25 sqrt(5)/5, a much larger and wrong value.

Example 5 (medium)

Find the radius of the circle passing through the points (0, 0), (4, 0) and (0, 6).

Marks-style solution of example 5
StepMarks
The circle passes through the origin, so it is x² + y² + Dx + Ey = 0.1
Through (4, 0): 16 + 4D = 0, so D = -4. Through (0, 6): 36 + 6E = 0, so E = -6.1
Centre (2, 3). Radius = sqrt(4 + 9) = sqrt(13).1
Radius = sqrt(13), about 3.61 units.1
Total: 4 marks4

Answer: sqrt(13), about 3.61 units

Fast method: The points form a right angle at the origin, so the hypotenuse from (4, 0) to (0, 6) is a diameter: length sqrt(16 + 36) = sqrt(52), radius sqrt(13).

Sanity check: Units: length. The centre (2, 3) is at distance sqrt(13) from (0, 0), sqrt(4 + 9) from (4, 0) and sqrt(4 + 9) from (0, 6): all three equal, as the centre of a circle through them requires.

Example 6 (hard, multi-step)

A circle has the join of (1, 1) and (5, 5) as a diameter. Find the length of the tangent drawn to it from the point (8, 3).

Marks-style solution of example 6
StepMarks
Diameter form: (x - 1)(x - 5) + (y - 1)(y - 5) = 0. The centre is (3, 3) and the radius is half of sqrt(16 + 16) = 2 sqrt(2).2
Tangent length squared = S1 = value of the left side at (8, 3): (8 - 1)(8 - 5) + (3 - 1)(3 - 5) = 21 - 4 = 17.2
Check by distance: the point is 5 units from the centre, so PT² = 25 - 8 = 17.1
Tangent length = sqrt(17), about 4.12 units.1
Total: 6 marks6

Answer: sqrt(17), about 4.12 units

Fast method: S1 straight from the diameter form: (7)(3) + (2)(-2) = 17, so the tangent length is sqrt(17). No need to find the centre or radius.

Sanity check: Units: length. The tangent length 4.12 is below the distance 5 from the point to the centre and above 0, as the leg of a right triangle with hypotenuse 5 and the other leg 2 sqrt(2) = 2.83 must be.

Formulas and units

Formula and unit box for Circle
ResultFormulaValid whenUnits or noteWorked example
Standard form(x - h)² + (y - k)² = r²circle with centre (h, k) and radius r > 0length squaredExample 2
General formx² + y² + 2gx + 2fy + c = 0x² and y² coefficients both 1, no xy termlength squaredExample 1
Centre and radius (general form)(-g, -f); r = sqrt(g² + f² - c)real circle only if g² + f² - c > 0lengthExample 1
Diameter form(x - x1)(x - x2) + (y - y1)(y - y2) = 0(x1, y1) and (x2, y2) are ends of a diameterlength squaredExample 6
Chord cut by a line2 sqrt(r² - d²)d is the centre-to-line distance, d < rlengthExample 3
Tangency of y = m x + c to x² + y² = r²c² = r² (1 + m²)non-vertical line y = mx + c; circle centred at originlength squaredExample 4
Tangent at (x1, y1) to x² + y² = r²x x1 + y y1 = r²(x1, y1) lies on the circle centred at the originlength squarednone
Length of tangent from Psqrt(S1) = sqrt(PO² - r²)P outside the circle; S1 is the circle's expression at PlengthExample 6
Common chord of S1 = 0 and S2 = 0S1 - S2 = 0both circles have x², y² coefficients equal to 1; they intersectlength squarednone
Intercepts on the axesx-axis: 2 sqrt(g² - c); y-axis: 2 sqrt(f² - c)general-form circle; real intercepts need g² > c, f² > clengthnone

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Reading the right side of (x - h)² + (y - k)² = 36 as the radius 36, or reading sqrt(g² + f² - c) with the wrong sign of c. Why it tempts: The constant sits alone on one side and looks like the answer; c is subtracted, so a negative c adds to the radius squared, and the sign is easy to flip.
  • Taking the centre as (g, f) instead of (-g, -f). Why it tempts: The symbols g and f appear in the equation with plus signs, and an option with the unsigned centre is nearly always present.
  • Using the chord formula 2 sqrt(r² - d²) with d measured to the wrong point, or quoting the half-chord as the chord. Why it tempts: The half-chord sqrt(r² - d²) is what the right triangle gives, and stopping there yields an option that is exactly half the correct one.
  • Putting r instead of r² in the tangency condition c² = r² (1 + m²) for a circle given as x² + y² = k. Why it tempts: The right side k is read as the radius; the condition needs r² = k.
  • Subtracting two circle equations that do not have the same coefficient for x² and y², so that a quadratic term survives. Why it tempts: The subtraction is mechanical; if one circle is written as 2x² + 2y² + ... the result is not a line until it is divided through.

Time per question and fast method

Target: about 100 seconds per question.

Read centre and radius first. For lines and circles, find d and compare with r before writing any quadratic. For tangent length use S1 or sqrt(D² - r²). For circles from a diameter use the product form; for two circles subtract the equations.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. What is the radius of the circle x² + y² = 49, in units?
Show the answer

Answer: C: 7. The right side is r² = 49, so r = 7.

Question 2. What is the x-coordinate of the centre of x² + y² - 8x + 2y + 1 = 0?
Show the answer

Answer: B: 4. Centre = (-g, -f) with 2g = -8, so g = -4 and the x-coordinate is 4.

Question 3. The circle has the points (0, 0) and (6, 8) as the ends of a diameter. What is its radius, in units?
Show the answer

Answer: C: 5. Diameter = sqrt(36 + 64) = 10, so the radius is 5.

Question 4. What is the length of the tangent from (5, 0) to the circle x² + y² = 9, in units?
Show the answer

Answer: B: 4. S1 = 25 + 0 - 9 = 16, so the tangent length is sqrt(16) = 4 units.

Question 5. A line is at distance d from the centre of a circle of radius r. For which relation does the line touch the circle?
Show the answer

Answer: B: d = r. d = r gives exactly one common point, a tangent; d r gives no intersection.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Reading the circle from its equation

Before reading off g, f and c, make sure the coefficients of x² and y² are both 1; if they are both equal to some other number, divide through first. Check the reality condition g² + f² - c > 0: a question may ask for the values of a parameter for which the equation represents a circle, and the answer is an inequality. A circle touches the x-axis when |k| = r, which gives c = g² for the general form, and touches the y-axis when |h| = r, which gives c = f². It passes through the origin when c = 0. Intercepts: the x-axis chord has length 2 sqrt(g² - c) and the y-axis chord has length 2 sqrt(f² - c).

Equation of a circle from conditions

A circle needs three conditions. Through three non-collinear points: substitute them into x² + y² + 2gx + 2fy + c = 0 and solve three linear equations. With a given centre and a point on it: the radius is the distance between them. With a given diameter: use the diameter form. Touching an axis or a line fixes the radius as a distance. A circle through the origin simplifies the general form to x² + y² + 2gx + 2fy = 0 and cuts the axes at (-2g, 0) and (0, -2f). A circle through three points is the circumcircle of the triangle they form, which links this topic with triangle centres.

Line and circle with centre at the origin

For x² + y² = r², solving with y = m x + c gives (1 + m²) x² + 2 m c x + c² - r² = 0. The discriminant is 4 r² (1 + m²) - 4 c² (up to a factor), so the line is a secant when c² < r² (1 + m²), a tangent when c² = r² (1 + m²) and misses the circle when c² is larger. The tangent at the point (x1, y1) on the circle is x x1 + y y1 = r² and the two tangents of a given slope m are y = m x + r sqrt(1 + m²) and y = m x - r sqrt(1 + m²). A frequent error is to use r instead of r² inside the formula when the circle is given as x² + y² = 5.

Two circles: common chord, tangent length and checks

For a line meeting a circle, the chord length is found by the half-chord formula: with d the distance of the centre from the line, the chord is 2 sqrt(r² - d²), and the line meets the circle in two points when d < r. The tangent length from P to a circle satisfies PT² = PO² - r², so if S1 is negative the point lies inside the circle and no real tangent exists. Check an answer by testing that the foot of the perpendicular from the centre is the midpoint of the chord, so d² + (half-chord)² = r².

Memory hook

Suppose a gardener fixes a peg in the middle of a field and ties a rope of 5 m to it, then walks around with the rope tight, marking the ground with a stick.

  1. The mark traced is a circle: every point on it is 5 m from the peg, whatever the direction.
  2. If a straight footpath passes 3 m from the peg, the rope reaches across it and the path cuts a chord. The chord has half-length 4 m, because 3, 4 and 5 form a right triangle.
  3. If the footpath were exactly 5 m from the peg it would only touch the mark, and beyond 5 m the rope never reaches it.

Distance of the centre from the line compared with the radius decides secant, tangent or miss, and the half-chord is sqrt(r² - d²).

Compare the centre-to-line distance d with r: chord half-length is sqrt(r² - d²).

Revision card

Try to answer each without looking above.

  1. Write the standard and general equations of a circle and give the centre and radius from the general form.
  2. State the condition for x² + y² + 2gx + 2fy + c = 0 to represent a real circle.
  3. Write the equation of the circle with the join of (x1, y1) and (x2, y2) as a diameter.
  4. State the chord length and the tangency condition for a line at distance d from the centre.
  5. Write the tangency condition c² = r² (1 + m²) and say what r² means for x² + y² = 5.
  6. How do you find the common chord and the tangent length from an external point?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 2; fixed: 2
  • Report: content/reviews/learn4-cog-2026-11-20.md

Textbook references

  • NCERT Mathematics, Class 11 (reprint 2026-27), Chapter 10: Conic Sections, 10.3 Circle (read 2026-11-22)

Sources used

  • NTA JEE (Main) 2026 syllabus, Mathematics, Unit 10 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
  • Standard results of school-level coordinate geometry; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.