Molecular Orbital Theory and Hydrogen Bonding: JEE Main
Reviewed Last updated 2026-11-20. Syllabus topic: Molecular orbital theory and hydrogen bonding.
In short. Atomic orbitals combine into bonding and antibonding molecular orbitals; bond order = (bonding - antibonding electrons) / 2 predicts stability, bond length and magnetism. Hydrogen bonds between X-H and a lone pair on N, O or F explain boiling points, ice structure and solubility.
- LCAO: two atomic orbitals give one bonding (lower energy) and one antibonding (higher energy) molecular orbital; sigma is head-on overlap, pi is sideways overlap.
- Order for B2, C2, N2 and their ions: sigma 2s, sigma* 2s, pi 2p (two), sigma 2p, pi* 2p, sigma* 2p; for O2, F2 and their ions sigma 2p lies below pi 2p.
- Bond order = (Nb - Na) / 2; higher bond order means shorter bond and higher bond energy; any unpaired electron means paramagnetism.
- Metallic bonding: a lattice of cations in a sea of delocalised electrons; strength rises with the number of delocalised electrons and falls with larger atoms.
- Hydrogen bonding needs H on a very electronegative small atom (N, O, F) and a lone pair on a neighbour; intermolecular raises boiling point, intramolecular (ortho) lowers it.
Syllabus line: CHEMICAL BONDING AND MOLECULAR STRUCTURE Kossel-Lewis approach to chemical bond formation, the concept of ionic and covalent bonds. Ionic Bonding: Formation of ionic bonds, factors affecting the formation of ionic bonds; calculation of lattice enthalpy. Covalent Bonding: Concept of electronegativity, Fajan's rule, dipole moment, Valence Shell Electron Pair Repulsion (VSEPR ) theory and shapes of simple molecules. Quantum mechanical approach to covalent bonding: Valence bond theory - its important features, the concept of hybridization involving s, p and d orbitals, resonance. Molecular Orbital Theory - Its important features, LCAOs, types of molecular orbitals (bonding, antibonding), sigma and pi-bonds, molecular orbital electronic configurations of homonuclear diatomic molecules, the concept of bond order, bond length and bond energy. Elementary idea of metallic bonding, hydrogen bonding and its applications. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 3 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Atomic structure (lesson planned): Shapes and phases of s and p orbitals and the Aufbau, Pauli and Hund rules are used to build molecular orbital diagrams. Read this first if filling order or orbital shapes are shaky.
- Covalent bonding, VSEPR, hybridisation and resonance: Sigma and pi bonds and bond order from resonance are used directly. Read this first if sigma and pi counting is unclear.
Related topics
- Ionic bonding, lattice enthalpy and Fajans rule
- Covalent bonding, VSEPR, hybridisation and resonance
- Chemical Bonding and Molecular Structure (lesson planned)
- Atomic Structure (lesson planned)
- p-Block Elements (lesson planned)
The concept step by step
Step 1: Why molecular orbitals and what LCAO means
Valence bond theory gives a bond from two half-filled orbitals but cannot explain why O2 is paramagnetic. Molecular orbital theory treats the electrons of the whole molecule as occupying orbitals that spread over all nuclei. These are built as linear combinations of atomic orbitals (LCAO): adding two wave functions in phase gives a bonding orbital, subtracting them gives an antibonding orbital. The number of molecular orbitals equals the number of atomic orbitals combined.
Step 2: Bonding and antibonding orbitals, sigma and pi
In phase overlap raises electron density between the nuclei and lowers energy: a bonding orbital. Out of phase overlap leaves a node between the nuclei and raises energy: an antibonding orbital, written with a star. Orbitals symmetric about the bond axis are sigma; those formed by sideways overlap of 2px or 2py and having a nodal plane containing the axis are pi. The two pi orbitals are degenerate, as are the two pi* orbitals.
Step 3: Energy order and how to fill
Fill electrons in order of energy, two per orbital with opposite spins (Pauli), and singly in degenerate orbitals before pairing (Hund). For B2, C2 and N2, mixing of 2s and 2p orbitals puts the pi 2p pair below sigma 2p: sigma 2s, sigma* 2s, pi 2p, sigma 2p, pi* 2p, sigma* 2p. For O2 and F2 the 2s-2p gap is larger, so sigma 2p lies below pi 2p. Count only valence electrons; the inner 1s pair is bonding and antibonding in equal measure and cancels.
Step 4: Bond order, length, energy and magnetism
Bond order = (number of electrons in bonding orbitals - number in antibonding orbitals) / 2. A higher bond order gives a shorter bond and a larger bond dissociation energy; a bond order of zero means no stable bond (He2, Be2, Ne2). If every electron is paired the species is diamagnetic; any unpaired electron makes it paramagnetic. The spin-only magnetic moment is the square root of n(n + 2) in Bohr magnetons, with n the number of unpaired electrons.
Step 5: Metallic bonding, elementary idea
In a metal, valence electrons are delocalised over the whole lattice of positive ion cores: the electron sea model. The bond is non-directional, which explains malleability and electrical conductivity. Bond strength rises with the number of electrons each atom contributes and with a smaller atomic size, which is why melting points of Na, Mg and Al rise in that order and fall down group 1.
Step 6: Hydrogen bonding and its applications
A hydrogen bond is the attraction between a hydrogen atom covalently bonded to a small, highly electronegative atom (N, O or F) and a lone pair on another such atom. It is much weaker than a covalent bond but far stronger than ordinary van der Waals forces. It raises the boiling point of H2O, HF and NH3 above the trend of their groups, gives ice an open structure that is less dense than water, and explains the dimers of carboxylic acids. Intramolecular bonding, as in o-nitrophenol, reduces association between molecules.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
Find the bond order and magnetic behaviour of N2, which has 10 valence electrons (pi 2p below sigma 2p).
| Step | Marks |
|---|---|
| Fill: sigma 2s 2, sigma* 2s 2, pi 2p 4, sigma 2p 2. | 1 |
| Bonding electrons = 2 + 4 + 2 = 8; antibonding = 2. | 1 |
| Bond order = (8 - 2) / 2 = 3. | 1 |
| All electrons are paired, so N2 is diamagnetic. | 1 |
| Total: 4 marks | 4 |
Answer: bond order 3; diamagnetic
Fast method: N2 is isoelectronic with CO and CN-: a triple bond, so bond order 3.
Sanity check: A bond order of 3 matches one sigma and two pi bonds in the valence bond picture, an independent check.
Example 2 (easy)
Find the bond order of O2⁺ (11 valence electrons, sigma 2p below pi 2p) and say whether the bond is shorter or longer than in O2.
| Step | Marks |
|---|---|
| Fill: sigma 2s 2, sigma* 2s 2, sigma 2p 2, pi 2p 4, pi* 2p 1. | 1 |
| Bonding electrons = 8; antibonding = 3. | 1 |
| Bond order = (8 - 3) / 2 = 2.5. | 1 |
| O2 has bond order 2, so O2⁺ has the higher bond order and the shorter, stronger bond. | 1 |
| Total: 4 marks | 4 |
Answer: bond order 2.5; shorter than in O2
Fast method: The electron removed from O2 leaves pi*, so the bond order rises by one half to 2.5.
Sanity check: Bond order 2.5 lies between 2 (O2) and 3, and the removal of an antibonding electron must raise it.
Example 3 (medium)
Calculate the spin-only magnetic moment of O2 (12 valence electrons) in Bohr magnetons, from its MO configuration.
| Step | Marks |
|---|---|
| Fill with sigma 2p below pi 2p: the last two electrons go to the two degenerate pi* 2p orbitals. | 1 |
| By Hund rule they occupy separate orbitals with parallel spins: 2 unpaired electrons. | 1 |
| mu = square root of n(n + 2) = square root of 8. | 1 |
| mu = 2.83 Bohr magnetons. | 1 |
| Total: 4 marks | 4 |
Answer: 2.83 Bohr magnetons
Fast method: Memorise the values: one unpaired electron 1.73, two 2.83, three 3.87.
Sanity check: The value must lie between 1.73 (one unpaired) and 3.87 (three) for two unpaired electrons.
Example 4 (medium)
How many unpaired electrons does C2 (8 valence electrons) have in its ground state, using the correct energy order for B2, C2 and N2?
| Step | Marks |
|---|---|
| For C2 the order is sigma 2s, sigma* 2s, pi 2p, sigma 2p. | 1 |
| Fill: sigma 2s 2, sigma* 2s 2, pi 2p 4, which exactly fills the pi pair. | 1 |
| No electron is left unpaired. | 1 |
| C2 is diamagnetic: 0 unpaired electrons (the wrong order would give 2). | 1 |
| Total: 4 marks | 4 |
Answer: 0 unpaired electrons
Fast method: For B2, C2, N2 and their ions the pi pair fills first: 4 electrons make it complete, so C2 with 8 electrons has no unpaired electron.
Sanity check: Bond order (6 - 2) / 2 = 2, two pi bonds; both orders give bond order 2 but only the correct order gives a diamagnetic C2.
Example 5 (hard, multi-step)
N2²- has 12 valence electrons and belongs to the B2-N2 group (pi 2p below sigma 2p). Find its bond order, the number of unpaired electrons and its spin-only magnetic moment.
| Step | Marks |
|---|---|
| Fill: sigma 2s 2, sigma* 2s 2, pi 2p 4, sigma 2p 2, pi* 2p 2. | 1 |
| Bonding electrons = 8, antibonding = 4: bond order = (8 - 4) / 2 = 2. | 1 |
| The two pi* electrons go in separate degenerate orbitals: 2 unpaired electrons. | 1 |
| mu = square root of 2 x 4 = 2.83 Bohr magnetons. | 1 |
| Total: 4 marks | 4 |
Answer: bond order 2; 2 unpaired electrons; 2.83 Bohr magnetons
Fast method: N2²- has the same 12 valence electrons as O2 and so the same bond order and magnetism, even though the orbital order differs.
Sanity check: N2 (10 electrons) has bond order 3; adding two antibonding electrons lowers it by 1 to 2, as found.
Example 6 (hard, multi-step)
Each molecule of H2O, HF and NH3 can both donate (through its N-H, O-H or F-H hydrogen) and accept (through a lone pair on N, O or F). Taking the maximum number of hydrogen bonds per molecule in the pure liquid as the smaller of the number of H atoms and the number of lone pairs on the central atom, find it for H2O, HF and NH3, and say which has the strongest overall hydrogen bonding network.
| Step | Marks |
|---|---|
| Count the donors and acceptors: H2O has 2 H atoms and 2 lone pairs on O; HF has 1 H and 3 lone pairs on F; NH3 has 3 H atoms and 1 lone pair on N. | 1 |
| Each hydrogen bond needs one H (donor) and one lone pair (acceptor), shared between two molecules, so the per-molecule count is the smaller of the two numbers. | 1 |
| H2O: min(2, 2) = 2; HF: min(1, 3) = 1; NH3: min(3, 1) = 1. | 1 |
| Water can build a three-dimensional network with two hydrogen bonds per molecule, while HF forms chains and NH3 is limited by its single lone pair. Together with the high electronegativity of O, this is why water has the most extensive hydrogen bonding of the three. | 2 |
| Total: 5 marks | 5 |
Answer: H2O 2; HF 1; NH3 1; water has the most extensive network
Fast method: Compare the number of O-H, F-H or N-H hydrogens with the number of lone pairs; the smaller number is the limit.
Sanity check: The counts are whole numbers and cannot exceed the number of hydrogens or lone pairs available; only water has both at 2, so a network is possible.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Bond order | BO = (Nb - Na) / 2 | homonuclear diatomic species; Nb, Na = bonding and antibonding electrons | dimensionless | Example 1 |
| B2, C2, N2 order | sigma 2s < sigma* 2s < pi 2p < sigma 2p < pi* 2p < sigma* 2p | diatomics up to N2 (14 electrons or fewer), including their ions | n/a (energy order) | Example 1 |
| O2, F2 order | sigma 2s < sigma* 2s < sigma 2p < pi 2p < pi* 2p < sigma* 2p | O2, F2 and their ions (more than 14 electrons) | n/a (energy order) | Example 2 |
| Spin-only magnetic moment | mu = square root of n(n + 2) | free species, n unpaired electrons; orbital contribution ignored | Bohr magneton (n unpaired electrons) | Example 3 |
| Bond order values | O2⁺ 2.5; O2 2; O2⁻ 1.5; O2²- 1; N2 3; N2⁺ 2.5; C2 2; B2 1 | valence electron counts filled in the correct order for each species | dimensionless | Example 2 |
| Bond order and bond length | higher bond order, shorter bond, higher bond energy | not applicable | n/a (qualitative) | Example 2 |
| Hydrogen bonds in ice | each molecule 4 contacts, each bond shared: 2 H bonds per molecule | ice, where every molecule is tetrahedrally bonded | count per molecule | none |
| Hydrogen bonding conditions | H on N, O or F; lone pair on N, O or F of a neighbour | not applicable | n/a (qualitative) | Example 6 |
Common mistakes and speed
- Using the O2 order for B2, C2 and N2 species, or the N2 order for O2 and F2. Why it tempts: The O2 diagram is the one shown first in school; the switch at N2 is easy to forget, especially for ions such as N2⁺ and N2⁻.
- Saying removing an electron always increases the bond order of a molecule. Why it tempts: Ionisation is linked with a stronger bond in a few well-known cases (O2⁺), which is generalised to N2, C2 and B2 where the electron leaves a bonding orbital.
- Counting 4 hydrogen bonds per molecule of ice per mole of water. Why it tempts: Each oxygen is surrounded by four bonds, but every bond is shared by two molecules, so there are 2 per molecule.
- Explaining the boiling point of water by bond strength of O-H rather than hydrogen bonding. Why it tempts: Boiling is thought of as bond breaking, but the covalent bond stays intact; only the intermolecular links are broken.
- Calling o-nitrophenol less volatile than p-nitrophenol. Why it tempts: Hydrogen bonding is associated automatically with higher boiling points; the intramolecular type does the opposite.
Time per question and fast method
Target: about 80 seconds per question.
Write the valence electron count, fill the six levels in the correct order (pi before sigma for B2, C2, N2 groups), then read bond order and unpaired electrons. For ion changes, decide whether the electron enters or leaves a bonding or antibonding orbital. For hydrogen bonding, ask which molecule has H on N, O or F and a nearby lone pair.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- Using ground-state valence molecular orbital configurations, the number of paramagnetic species among B2, C2,… Verified (T3)
- The bond order of the superoxide ion, O2⁻, from its molecular orbital configuration is Verified (T1)
- Which one of the following statements about hydrogen bonding is correct? Verified (T1)
- One electron is added to each of the following ground-state species: B2, C2, N2, O2, F2, N2⁺, O2⁺ and C2⁻.… Verified (T1)
- In ice each water molecule is hydrogen-bonded to four neighbours (two through its own hydrogen atoms and two… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
MO configurations of homonuclear diatomics
Valence configurations: Li2 sigma 2s2, bond order 1. Be2 sigma 2s2 sigma* 2s2, bond order 0. B2 (6): sigma 2s2 sigma* 2s2 pi 2p2, bond order 1, paramagnetic with two unpaired electrons in the degenerate pi pair. C2 (8): pi 2p4, bond order 2, diamagnetic, two pi bonds and no sigma 2p bonding. N2 (10): adds sigma 2p2, bond order 3, diamagnetic. O2 (12): sigma 2s2 sigma* 2s2 sigma 2p2 pi 2p4 pi* 2p2, bond order 2, paramagnetic. F2 (14): pi* filled, bond order 1. Ne2 would have 16 valence electrons and bond order 0. The B2 to N2 ordering is the standard exam trap: using the O2 order for C2 gives a wrong magnetic character.
Charged species and trends in bond order
Adding or removing an electron changes the bond order by one half when the electron goes in or leaves a bonding or antibonding orbital. N2⁺ (9 electrons) has bond order 2.5, N2⁻ (11) 2.5, O2⁺ (11) 2.5, O2⁻ (13) 1.5, O2²- (14) 1.0. So removing an electron from N2 lowers the bond order (3 to 2.5) because the electron leaves a bonding orbital, but removing one from O2 raises it (2 to 2.5) because it leaves pi*. The same reasoning gives the order of bond lengths: O2⁺ < O2 < O2⁻ < O2²-. Bond energy follows the same order for these species.
Magnetism and spin-only moment
Paramagnetic species have unpaired electrons and are drawn into a magnetic field; diamagnetic ones are repelled slightly. Odd-electron species are always paramagnetic. Even-electron species are paramagnetic only when degenerate orbitals hold unpaired electrons: B2 (pi 2p) and O2 (pi* 2p) are the standard cases, and N2²- (12 electrons) resembles O2. The spin-only moment is the square root of n(n + 2) Bohr magneton: 1.73 for one unpaired electron, 2.83 for two, 3.87 for three. These values are a model; real moments of molecules differ slightly.
Metallic bonding and the factors that matter
Treat the metal as ion cores in a mobile sea of valence electrons. Strength increases with the number of delocalised electrons per atom and decreases with larger atomic radius, so a harder, higher-melting metal has more valence electrons and smaller atoms. Na has one electron, Mg two, Al three: strength Na Na > K. This is a qualitative model; transition metals also use d electrons, which is why they bond more strongly than s-block metals. Use the model only to order metals in the same period or group.
Hydrogen bonding: types, effects and where it appears
Intermolecular hydrogen bonds associate molecules into chains or networks and raise melting and boiling points and viscosity. In HF the zig-zag chains give a boiling point higher than HCl, HBr and HI; for the other hydrogen halides the boiling point rises down the group with molar mass. H2O boils above H2S, H2Se and H2Te for the same reason. In ice each oxygen is bonded to four neighbours through hydrogen bonds, giving an open tetrahedral network; on melting some bonds break and the structure collapses, so ice is less dense than water. Intramolecular hydrogen bonding (o-nitrophenol, salicylaldehyde) keeps molecules separate, giving lower boiling points and steam volatility than the para isomers, which associate between molecules. Solubility in water also rises when a solute can form hydrogen bonds with water.
Memory hook
Suppose two temple bells hang side by side and two people ring them, once in step and once out of step.
- When the bells ring in step, the sound adds up in the space between them: that is a bonding orbital, with more electron density between the nuclei.
- When they ring exactly out of step, the sound cancels at the midpoint: a silent node between the bells, the antibonding orbital with no density between the nuclei.
- Count the people who join the louder pattern and take away those in the silent pattern: that difference, halved, is the bond order, and an unmatched ringer is an unpaired electron.
Waves of electrons add between the nuclei to bond or cancel to repel, and the net count of bonding minus antibonding electrons, halved, is the bond order.
In step builds a bond, out of step breaks it; count the difference and halve it.
Revision card
Try to answer each without looking above.
- Write the energy order of molecular orbitals for B2, C2, N2 and for O2, F2.
- Give the bond order and magnetism of N2, O2, O2⁺ and O2⁻.
- How are bond order, bond length and bond energy related?
- State the spin-only magnetic moment formula and its value for 1, 2 and 3 unpaired electrons.
- Name the two factors that make a metallic bond stronger.
- Why is o-nitrophenol steam volatile while p-nitrophenol is not?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 1; fixed: 1
- Report: content/reviews/learn3-bnd-2026-11-20.md
Textbook references
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 4: Chemical Bonding and Molecular Structure, 4.7.5 Electronic Configuration and Molecular Behaviour (read from the page image, PDF page 30) (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 4: Chemical Bonding and Molecular Structure, 4.7.4 Energy Level Diagram for Molecular Orbitals (read from the page image, PDF page 30) (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 3, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
- NCERT Class 11 Chemistry, Chemical Bonding and Molecular Structure chapter: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.