GATE MT 2027: syllabus and marking scheme
GATE Metallurgical Engineering (paper code MT)
The official GATE 2027 syllabus, paper MT (IIT Madras) lists 8 syllabus lines in 8 sections, shown below in the exact official wording. The exam lasts 3 hours. Multiple choice: a wrong answer costs 1/3 of the marks of that question; an unanswered question scores 0.
Pattern and marking
| Section | Questions | Type | Marking |
|---|---|---|---|
| General Aptitude (1 mark) | 5 | Multiple choice, multiple select and numerical answer | Wrong multiple choice: minus one-third of the marks; none for multiple select or numerical; no partial marks |
| General Aptitude (2 marks) | 5 | Multiple choice, multiple select and numerical answer | Wrong multiple choice: minus one-third of the marks; none for multiple select or numerical; no partial marks |
| Subject including Engineering Mathematics where present (1 mark) | 25 | Multiple choice, multiple select and numerical answer | Wrong multiple choice: minus one-third of the marks; none for multiple select or numerical; no partial marks |
| Subject including Engineering Mathematics where present (2 marks) | 30 | Multiple choice, multiple select and numerical answer | Wrong multiple choice: minus one-third of the marks; none for multiple select or numerical; no partial marks |
More verified facts
- Duration: 3 hours (180 minutes).
- Total marks: 100.
- Language of the paper: English.
- Calculator: on-screen virtual scientific calculator; physical calculators are prohibited in the hall.
- Numerical answers: on-screen virtual numeric keypad for NAT answers (the computer keyboard is disabled); the answer is a signed real number, an integer or with up to three decimals, and the question states the decimal places required; no options are shown.
- Multiple choice: a wrong answer costs 1/3 of the marks of that question; an unanswered question scores 0.
- Multiple select: no negative marking and no partial marks.
- Numerical answer type: no negative marking.
Pattern source: GATE 2027 Information Brochure, revised version dated 17 October 2026 (IIT Madras) (official document). Last checked 2026-11-21. Every pattern fact above cites a section of that document in our data. The split of the subject questions into 25 one-mark and 30 two-mark questions is worked out from the stated totals (55 questions carrying 85 marks), not quoted.
Official syllabus lines (2027)
Copied from GATE 2027 syllabus, paper MT (IIT Madras), read on 2026-11-21. Each line is shown unchanged.
Section 1: Engineering Mathematics
- Linear Algebra: Matrices and determinants; systems of linear equations; eigenvalues and eigenvectors. Calculus: Limit, continuity and differentiability; partial derivatives; maxima and minima; sequences and series; test for convergence; Fourier series. Vector Calculus: Gradient, divergence and curl; line, surface and volume integrals; Gauss theorem. Differential Equations: Linear and non-linear first order ODEs; higher order linear ODEs with constant coefficients; Cauchy’s and Euler’s equations; PDEs – one dimensional heat and wave equations. Probability and Statistics: Definitions of probability; conditional probability; mean, median, mode and standard deviation; random variables; Poisson, normal and binomial distributions; analysis of experimental data; linear least squares method. Numerical Methods: Roots of linear and non-linear algebraic equations of single variable (bisection, secant, Newton- Raphson methods); numerical integration (trapezoidal rule) and differentiation (Taylor series expansion).
Section 2: Metallurgical Thermodynamics
- Laws of Thermodynamics: First law – energy conservation, Second law - entropy; enthalpy, Gibbs and Helmholtz free energy; Maxwell’s relations; chemical potential; applications to metallurgical systems; solutions, ideal and regular solutions; Gibbs phase rule, phase equilibria, binary phase diagram and lever rule; free-energy vs. composition diagrams; equilibrium constant, activity, Ellingham and phase stability diagrams. Electrochemistry: Single electrode potential; electrochemical cells; Nernst equation; potential-pH diagrams.
Section 3: Transport Phenomena and Rate Processes
- Momentum Transfer: Concept of viscosity; shell balances; Bernoulli’s equation; mechanical energy balance equation; flow past plane surfaces and through pipes. Heat transfer: Conduction - Fourier’s Law, 1-D steady state conduction; convection; heat transfer coefficient and correlations; radiation; Stefan-Boltzmann Law; Kirchhoff’s Law. Mass Transfer: Diffusion and Fick’s laws, mass transfer coefficients and correlations. Dimensional Analysis: Significance of dimensionless numbers and their applications. Basic Laws of Chemical Kinetics: First order reactions; reaction rate constant; Arrhenius relation; heterogeneous reactions; oxidation kinetics. Electrochemical Kinetics: Polarization.
Section 4: Mineral Processing and Extractive Metallurgy
- Comminution; Size classification; Flotation, Gravity, magnetic and electrostatic separation methods of mineral beneficiation. Principles of pyro, hydro and electro metallurgy; unit processes for extraction of non-ferrous metals – aluminium, copper, titanium, zinc, and associated heat and material balance. Ironmaking: Thermodynamics of blast furnace ironmaking; heat and material balance in blast furnace; production of sinter, pellets, metallurgical coke and testing, alternative routes of iron making (rotary kiln, MIDREX, COREX). Primary Steel Making: Structure and properties of slags; thermodynamics and kinetics of steelmaking; basic oxygen furnace and electric arc furnace steel making. Secondary Steel Making: Ladle process – deoxidation, degassing, argon stirring, desulphurization, inclusion shape control; basics of stainless steel manufacturing. Continuous Casting: Basics of continuous casting, casting defects, thin slab casting.
Section 5: Physical Metallurgy
- Materials Characterisation: X-ray Diffraction-Bragg’s law; optical microscopy; imaging and spectroscopy in SEM. Crystal Imperfections: Point, line and surface defects; coherent, semi-coherent and incoherent interfaces. Diffusion in Solids: Atomic models for interstitial and substitutional diffusion; volume, surface and grain boundary diffusion, Kirkendall effect; uphill diffusion. Phase Transformation: Driving force; homogeneous and heterogeneous nucleation; growth kinetics; solidification in isomorphous, eutectic and peritectic systems; cast structures and macrosegregation; dendritic solidification and constitutional supercooling; coring and microsegregation. Solid-state Transformations: Precipitation; eutectoid transformation, diffusionless transformations; precipitate coarsening, Gibbs-Thomson effect; glass transition in ceramics and polymers. Principles of heat treatment: Heat treatment of steels; time-temperature-transformation (TTT) and continuous cooling transformation (CCT) diagrams; surface hardening; recovery, recrystallization and grain growth; heat treatment of cast irons and aluminium alloys. Corrosion: Basic forms of corrosion and its prevention.
Section 6: Mechanical Behaviour of Materials
- Elasticity; strain tensor and stress tensor; representation by Mohr’s circle; uniaxial tensile testing and stress-strain curves for metals, ceramics, and polymers; Tresca and von Mises yield criteria; plastic deformation by slip and twinning. Dislocation Theory: Edge, screw and mixed dislocations; sources and multiplication of dislocations; stress fields around dislocations; partial dislocations; dislocation interactions and reactions. Strengthening Mechanisms: Work/strain hardening, strengthening due to grain boundaries, solid solution, precipitation and dispersion. Fracture behaviour: Griffith theory; linear elastic fracture mechanics; fracture toughness; fractography; ductile to brittle transition; toughening mechanisms in ceramics. Fatigue: Low and high cycle fatigue; crack growth. High Temperature deformation: Mechanisms of high temperature deformation and failure; creep and stress rupture, stress exponent and activation energy.
Section 7: Manufacturing Processes
- Metal Casting: Mould design involving feeding, gating and risering, casting practices, casting defects. Hot, Warm and Cold Working of Metals: Metal forming – fundamentals of metal forming processes of rolling, forging, extrusion, wire drawing and sheet metal forming; defects in forming. Metal Joining: Principles of soldering, brazing and welding; welding metallurgy, defects in welded joints in steels and aluminium alloys. Powder Metallurgy: Production of powders, compaction and sintering. Non-destructive Testing (NDT): Dye-penetrant, ultrasonic, radiography, eddy current, acoustic emission and magnetic particle inspection methods.
Section 8: Materials Science and Non-Metallic Materials
- Classification of engineering materials; chemical bonding- ionic, covalent, metallic and secondary bonding in materials; Structure of metals and alloys, ionic and covalent bonded solids and polymers. Polymers: Molecular weight; thermoplastics and thermosets; copolymers; crystallinity of polymers. Ceramics: Radius ratio and electroneutrality rules for determining crystal structure; Schottky and Frenkel defects, non-stoichiometric defects. Composites: Types of reinforcements and matrices; enhancement in modulus and strength; isostrain and isostress loading conditions. Electronic Properties: Band gap; Fermi energy; conductors, semiconductors and insulators. Magnetic properties: Magnetization and B-H curves, principles of ferro-, ferri-, antiferro-, para- and dia- magnetism.
What is next
Question pages, topic notes and practice sets for this exam are being prepared on the same syllabus graph as JEE Main. Until a question has passed our checks it is not shown as verified.